Write a Review

T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 24.00mm - Over Bearing Width: 91.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 119g

The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

The RR 1.5 stem offers the rider or mechanic the ability to change the stem without cutting the disc brake cables while simultaneously offering a fully integrated cable setup. A removable top allows for easy access while a magnetic stem cap cover completes the minimalist look. KEY FEATURES - Designed for road use - Internal cable routing - Forged and machined AL7075 body - Hook type face plate for integrated design - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - Incl. Stem cap and bolt - Spacer kit and cap included

The Specialized Power Arc Expert saddle expands on the success of the original Power saddle. It features the same channel, length, and hollow titanium rails as the original and Pro Arc, but where it differs is in its shell and padding. But this means that it still features a stiff composite shell and supple, Level 2 PU padding. The shape of the saddle is also designed to provide ample sit bone support, and this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. Specialized even took this ideology a step further via an extra wide and elongated Body Geometry channel that's been proven through blood flow testing and pressure mapping to reduce numbness and pressure on unwanted areas. And while this all seems familiar if you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle," not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries. - Lightweight and supportive PU padding for comfort and support on longer rides. - Lightweight, durable, and hollow titanium rails. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight: 233g - Size 155mm / Weight: 235g - Size 168mm / Weight: 238g

The Shimano 105 R7000 mechanical brake Dual Control Levers bring quick and intuitive shifting and confidant braking in an affordable package. Features - Redesigned internal shifting unit - Greater reach adjust range - Easier access to inner shift cable - Quick and intuitive rear shifting operation - Reliable performance in race conditions - Lighter front shifting when paired with FD-R7000

With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

The Shimano Deore XT Explorer Dual-Platform Pedals combine the efficiency of the SPD system and the convenience of a platform pedal, all in a lightweight package. - One side SPD, one side platform - Two-sided flexibility and performance - Ideal for trekking - Customize the entry and release tension settings - 392 grams - Concave cleat clearance on platform side - High-grip pins - Sealed cup and cone bearings

The PRO MSN 1.3 Enduro Saddle is a short length saddle designed specifically for Enduro mountain bikers and technical trail riders. It features a lightweight carbon reinforced base with robust stainless steel rails and durable PU padding. Designed to provide you with a better sports bicycle experience the PRO MSN 1.3 Enduro Saddle is developed for Enduro and other mountain bikers who prefer a neutral position in the saddle. Its short length design ensures that it remains out the way when needed, especially when your dropper seatpost is dropped. When climbing the neutral position, it provides a sturdy and comfortable perch from which to power your performance, thanks to its lightweight carbon reinforced base, robust stainless steel rails and broad anatomic fit recess. To improve functionality in the wet-weather conditions you are likely to encounter on high elevation, big mountain, rides it also boasts a drainage port in the anatomic fit recess. PRO have used PU padding and a PU cover in order to reduce weight and produce a saddle which is abrasion resistant. The high-density PU padding also helps ensure comfort while cranking up long climbs, in a seated position. The PRO MSN 1.3 Enduro Saddle was comprehensively tested by the PRO Community Riders and is designed to work perfectly in conjunction with any of the PRO Koryak Dropper Seatposts. Though its rounded stainless steel rails make it easy to attach to any dropper or even conventional seatpost. It is available in 142- (PRSA0372) and 152-millimeter (PRSA0373) widths, with the narrower of the two tipping the scales at just 255 grams. Mountain bike saddle designed for Enduro and Trail riders Provides for a neutral position on the saddle Short length design Anatomic fit recess with drainage port Base: Carbon Reinforced Rails: Stainless Steel Padding: PU Cover: PU Width: 142mm and 152mm Weight: 255g (PRSA0372) and 275g (PRSA0373)

The PRO MSU 1.3 E-MTB Saddle is an Enduro and Trail E-MTB bike specific saddle, with a carbon reinforced base, stainless steel rails and PU padding. It is developed to power the performance of E-MTBers taking on technical trails and provide a comfortable upright seated position. Designed to provide you with a better sports bicycle experience the PRO MSU 1.3 E-MTB Saddle is a short length E-MTB saddle, developed to provide comfort while in a seated upright position. Developed with technical trail and E-Enduro riding in mind the saddle is robust and provides the ideal upright body position typically required for seated efforts on long-travel E-MTBs. Along with its strategically located high-density and lightweight PU padding the PRO MSU 1.3 E-MTB Saddle boasts a broad anatomic fit recess, with a drainage port. This port allows water to drain from the anatomic fit recess during wet rides. In order to ensure the saddle remains lightweight it features a carbon reinforced base, which is set on round stainless steel rails, for maximum seatpost compatibility. Ideally the PRO MSU 1.3 E-MBT Saddle could be paired with one of PRO’s range of Koryak Dropper Seatposts. It is available in both 142- (PRSA0374) and 152-millimeter (PRSA0375) widths and weighs 280 grams for the narrower version. Mountain bike saddle designed for Enduro and Trail riders Provides for a neutral position on the saddle Short length design Anatomic fit recess with drainage port Base: Carbon Reinforced Rails: Stainless Steel Padding: PU Cover: PU Width: 142mm and 152mm Weight: 280g (PRSA0374) and 285g (PRSA0375)

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads

Shimano Ultegra R8000 dual-pivot brake caliper. - Clear contact feeling with balanced rigidity, weight and stopping power - Stabilizer between axles reduces deformation and improves braking efficiency - More predictable, linear braking curve - Sleek design - Narrower gap between arms - Wider clearance with larger tire sizes - Compatible with wider 28c tire size - Model Number: BR-R8000 - Series: Ultegra - Brake Type: SLR EV Dual Pivot - Average Weight: 182 grams (Front) 178 grams (Rear)

Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8120 4-piston caliper is designed for tough enduro trails - Set includes brake lever, caliper, finned metal pads, and hose - Brakes are pre-bled for convenient setup

Extreme stopping power. 30% less time lag and 10% more braking power – figures that even a super hero would be proud of! - Designed for the toughest enduro trails out there! - Mounts: Front or Rear - Disc Mount: Post Mount 74mm - Quicker rebound between actions maintains rider concentration - Greater flexibility and action-optimized - Quicker brake engagement with shorter free stroke - 10% more braking power (versus M9020) - 8% stiffer for better performance (vs M9020) - Series: XTR M9100 Series - Brake Hose compatible: SM-BH90-SBM (not included) - Compatible with I-Spec EV shift levers - Oil compatible: Shimano Mineral oil (not included) - Brake Caliper: 4-piston - Brake Pads: N04C metal pads w/fins (Ice Tech) - Includes 1 Brake Caliper Only

- The result of extensive anatomic study of ladies' saddles - Gel Flow features gel around the anatomic central relief area for maximum comfort - Shock-absorbing technology is used between the rails and the shell, which dampens vibration and helps absorb road shock - Leather top, perforated leather gel area covers - Manganese 7mm rail combines strength and affordability - 300g (135mm) / 310g (160mm)

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke. - The only oval rings with X-Sync 2 tooth design - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Round or Oval: Oval - Chainline/Hub Compatibility: 141/148 Boost Hubs

Simplicity and performance made for all day adventures. The pure shifting performance of Eagle AXS is now available with GX. Shift under load, over the roughest terrain, uphill, without changing your grip on the bar. GX Eagle AXS changes your level of control on the bike when you're under pressure and pushing hard. More than that, it changes your relationship with the bike. No cable, housing or wires to manage opened up design and engineering possibilities with the GX Eagle AXS controller. Featuring the proven ergonomic touchpoints that make shifting effortless, they are customizable to your preferences, allowing you to choose which button does what through the AXS App. - AXS enabled componentry software makes it possible to both program and personalize compatible SRAM and RockShox components - Touchpoints are totally customizable to your preferences, allowing you to choose which button does what through the SRAM AXS App - Customize inboard and outboard shift options - Compatible with SRAM MatchMaker X - System is completely water- and dust-proof to IP69K - Pairs with all derailleurs in the SRAM Eagle AXS ecosystem

SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.

Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes

Make that daily ride from your front door a little spicier with some dirt. The 440% range of the XPLR XG-1251 cassette provides smooth gear progression when you're sweating up gravel climbs, and tight jumps on the high end for when it's time to drill it on asphalt. Shift features on each cog are optimized for electronic shifting, so you'll get fast, smooth and precise shifts every time. - X-Range gearing gives you more range and a smoother gear progression, so you're always in the right gear - 440% range gives the coverage 1x gravel riders want - For use with XPLR 1x rear derailleurs - Compatible with Flattop chains - Compatible with XDR driver body - MINI CLUSTER technology for lightweight and durability SPECIFICATIONS: - SPEED (CS): 12s - GEARING: 10-44t - COG FINISH (CASSETTE): Nickle Chrome - TECHNOLOGY (CASSETTE): XG - COG SIZES: 10-44T: 10,11,13,15,17,19,21,24,28,32,38,44

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. This is a tapered headset intended for forks that require a 44mm top headtube diameter, and a 56mm bottom headtube diameter. T - Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/x - Top Type: ZS - ZeroStack - Top Head Tube Inside Dia.: 44.00mm - Stem Clamp Dia.: 28.6mm - Top Stack Height: 8mm - Top Bearing Type: Top-quality, sealed stainless steel bearings - Bottom Type: ZS - ZeroStack - Bottom Head Tube Inside Dia.: 55.95mm - Crown Race Seat Dia.: 39.79mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 4mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 88.47g