Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pumps/Inflation

$17.95
XLAB's Nanoflator CO2 inflator is small, light, easy to use, and built to last of light and durable aluminum. Simply thread on a CO2 cartridge (sold separately), press the Nanoflator on your valve, twist the black nozzle to inflate and you've got a full tire in seconds. Plus, the low-profile head works great on standard and disc wheels and fits all valve types.
$14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$18.00
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
$15.94 $19.99 20% Off
- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible
$17.99
• Lightweight and compact mini pump • For both schrader and presta valves • Maximum pressure up to 11Bar / 160PSI • Magnet lock system • Glass fiber reinforced Nylon material • Colour: Black
$17.95
Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 45 grams - Lifetime warranty
$16.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
$11.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$17.95
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included
$10.95
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
$15.99
Sunlite's Model D Floor Pump has a 16-inch tall steel barrel for easy inflation and a sturdy base. The easy-to-use thumblock head fits all of your Schrader valve tubes.
$19.99
Sunlite's Model W Floor Pump has a 20-inch tall steel barrel for easy inflation. For easy transport and storage, the base features folding feet. The easy-to-use thumblock head fits all of your Schrader valve tubes.
$15.99
- Dual head mini road pump - Presta/Schrader compatible head - High pressure/high volume switch - Ergo fit T-handle - 120psi max
$15.99
- Mini multisport pump perfect for taking along on the next adventure - Ball needle and inflator included - Presta/Schrader reversible head - 2-way pumping action - Twist lock valve connection - 80 psi max - Head Type: PV/SV
$14.99
• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps
$10.00
Keep your Air Tool Pro floor pump working fantastic with this replacement head and hose.
$14.99 $19.99 25% Off
This durable pump with SwitchHitter head automatically adjusts for Schrader or Presta valves. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
$12.10
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
$10.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
$12.95
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$16.95
Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$16.95
It’s back, the Pro’s favorite! Perfect for Tubeless tires, valve extenders and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for any Presta application. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. Deep head adapts to a wide variety of applications including valve extenders. The head is now very easy to get on and off. This head is a MUST for Tubeless tire users. Allows high-flow inflation with the valve core removed for seating tires. PUSH on / PUSH off – the fastest way to get you going. Made with nickel-plated 6061-T6 alloy – Strong as Brass and only 1/3 the weight. It’s also compatible with Silca pumps and can be adapted to other pump brands with our optional Schrader barb or our floor pump replacement hose. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
$17.00
The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!
$16.95
Quick-Clip design for frequent Schrader use. Prestacycle's oversized spring stands-up to high bicycle pressure for a good seal and safety. The compact angle head goes where even floor pump heads can’t reach, like kids bikes and small scooter tires! Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
$19.00
The Fatty Object CO2 inflator fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. - Precision machined alloy parts - For use with both Presta and Schrader valves
$19.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 
$19.99
Angled Presta valve adapter - Designed for disc wheel use
$14.99
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
$11.99
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.
Page 1 of 2 Next page