BMX

Need to replace your Sano Brakes Straddle Cable & Knarp? -Includes Straddle Cable, Knarp And Cable End -Customize To Fit -Compatible With Most U-Brakes

Slicker sleeves are plastic peg covers designed for use with Little Ones pegs. - Little Ones pegs lock into plastic sleeve - Injection molded composite construction - Sold each

Replacement hardware for all Sunday Freeze BMX stems. Comes in a pack of 6 bolts. -Thread: M8x1.25 -Length: 23mm -Head Diameter: 11mm -Wrench Size: 6mm Hex

Replacement Seat Clamp Bolt for Subrosa frames with a built in Seat Post Clamp. -4130 Cro-Mo -Heat Treated -Includes Nut / Bolt

Rookie bottom bracket from Salt, featuring stainless bearings. Includes all spacers and cones for adjustment

The SE Bikes Life donuts not only protect your inner thumb from abrasion, but they also add some unique style to your ride - Made from neoprene foam - 5mm thick

Foam neoprene donuts prevent blisters and discomfort associated with high flange BMX grips - Adorned with the SE Bikes wing logo - Available in a variety of colors

Fits in any frame designed for 27.2mm posts and reduces to 25.4mm. Shim is 3? long and is slotted to allow seat clamp to tighten.

Square wood coaster with S&M logo. Made in USA.

Need new pinch bolts for your Bangin’ 8 Cranks? 4140 Chromoly Heat Treated M7 x 1mm

Brakes are only good as the cable - The Spring Brake Cable features a straight linear style housing that reduces compression, increases braking response and overall stopping power. Won’t kink up on bar spins. And they also feature a Teflon coated inner wire for a smooth pull.

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

Replacement parts for Odyssey Grandstand Pedals. Left or Right spindle.

Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Features -Short, Medium, or Long to fit a range of handlebar sizes -Fits most detangler systems -Designed specifically for GTX-S and G3 Gyros

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

This pro-level spoke wrench is comfortable enough for doing daily full-on wheel builds and features G-Sport’s proprietary taper-hex nipple slot on one side and the traditional 3.2 (Zero/Black) spoke nipple slot on the other. Made from chromoly steel. Dual sided interface for greater versatility Taper-Hex slot delivers superior torque to G-Sport Taper-Hex nipples 3.2 (Zero/Black) slot works with traditional BMX spoke nipples Tough chromoly construction fights everyday wear and tear

Male bolts for G Sport hubs. For 14mm Axles, and featuring both 17mm wrench flats and 6mm hex broach

The Cult 410 chain is a strong and affordable 1/8" chain based on the original KMC 410 with stamped Cult logos and a Teflon coating. Includes a preinstalled half link to make fine tuning the length easier. Width: 1/8" Total Links: 100 Weight @ 72 Links: 7.9 oz Masterlink: No, half link pre-installed Tool: Park CT-5 or CT-3.2

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

Team tested & designed heavy duty street tire. Extremely sticky and durable rubber compound, plus a more aggressive side tread for long life resistance.

The Sunday Slim Seatpost Clamp is a removable, ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. 2014-T6 aluminum construction Replaceable hardware Self-aligning nut Standard 1-1/8? size

The Subrosa Speed Sprocket is a 100% CNC machined, 7075-T6 sprocket that is designed to resemble a classic shape with the strength and weight that modern riders demand. The unique 10 spoke design retains strength while also reducing weight. Subrosa left a large amount of material around the outer profile to help maintain the shape during impacts. This 6mm thick sprocket is built to take it!

Cast alloy platform with reinforcements to prevent breakage. Combination of molded and replaceable pins for dialing in just the right amount of traction.

The S&M Chain Saw Sprocket is made in the USA from 6061 aluminum. It features a 15/16" bore, 3/32" teeth for compatibility with standard BMX chains, and includes adapters to fit 19 and 22mm bores. Available in a range of tooth counts from 30 up to 44.

Formerly known as the GNS pedals, the S&M BTM pedals have been adopted by legend Mike Hoder to become his signature model. They feature a large ergonomic shape with a micro-knurled surface and 15 molded pins per side that are designed for grip and support. The long lasting nylon/fiber blend is also perfect for sliding. The oversized chromoly spindle can accept a 6mm Allen, 15mm, or 17mm wrench for installation/removal. Note: 1/2" fits 1-piece cranks. 9/16" fits 3-piece cranks. Specifications: Platform Size: 103 x 98mm Platform Material: Nylon/Fiber Blend Spindle Size: 9/16" Spindle Material: Chromoly Pins: 15 per Side Color: Black Weight: 14.3 oz

The Hoder SkyHigh Bar, just in case the Hoder and Hoder High bars don’t get you high enough. RISE: 9.5? WIDTH: 31? UPSWEEP: 1.5° BACK SWEEP: 11° CROSS BAR: .75? WEIGHT: 2.70 lb (.083?)

The S&M No Exit freestyle bar is Chris Child's signature bar and pairs tried and true angles with classic S&M tubing for outstanding strength and feel. The No Exit incorporates a slightly narrower box section than the Hoder High bar for folks that turn up for clicked turndowns. Specifications: Rise: 9.125" Width: 29" Backsweep: 11° Upsweep: 2° Crossbar Height: 6.5" Crossbar Width: 11" Color: Flat Black Weight: 38.4 oz

S&M Bikes 7/8" aluminum seatpost. Made in USA out of 6061 T-6 Aluminum .120" wall, approximately 12" in length For frames that use a 7/8" (22.2mm) seatpost Anodized BLACK Minimum insertion 4" Made in the USA! Please keep in mind that this 7/8" seatpost size is made as a replacement part for bikes that were made in the 70's through the 90's. Bikes back then were made for kids and teens. If you are an adult, with a body larger than you were when you were a teen, you may have the ability to bend this seatpost while riding. It's made from strong alloy here in the USA, but it still can bend under certain conditions of use. Therefore, no warranty is given on this item.

The Bluebird chain is the proven and reliable KMC 510-HX chain with an added permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit. - Includes installed half link

Aaron Ross' signature Boss v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip Special surface contouring and a larger bolt head spec for superior handlebar grip Six bolt clamping configuration Headset pre-load bolt recess (32mm diameter) Steerer Clamp Diameter: 1 1/8" Stem Type: Top Load Bar Clamp Diameter: 22.2mm Reach: 52mm Rise: 35mm Color: Black

BOYD Stem - Black - Clean looks, comfortable reach/rise, and a palm tree etching so you can take the beach-y vibes with you. Features - Boyd Hilder Signature - Unique surface contouring for superior handlebar grip - Six bolt clamping configuration - 6061-T6 aluminum, CNC machined Specs - Reach: 52mm - Rise: 30mm

The Odyssey Broc v2 stem is a refined update to Broc Raiford’s popular signature Raft stem. The Broc stem utilizes a classic top-load and 6-bolt design, but it now comes with a slightly taller 33mm rise and sleeker lines below the clamp. The bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip. Special surface contouring and a larger bolt head spec for superior handlebar grip Six bolt clamping configuration Headset pre-load bolt recess (32mm diameter)

The Evo 2.5 Brake features a wider space to accomidate larger tires. Forged from aluminum for strength More clearance for larger tires Front or rear brake compatible Includes all necessary hardware Brake kit features all necessary hardware included, Odyssey Slim by Four brake pads, Monolever medium hindged lever and front for rear compatibility

Odyssey pivotal seatposts feature a laser-etched logo and are made of forged aluminum.

Odyssey Shortcut BMX Handlebar - 9", Black

Travis Hughes’ signature design features a multi-directional ribbed pattern for superior grip and comfort no matter how your hand lands on it.

12 inch custom knit , Extra soft super slouch beanie with Merritt woven label

Simple frame bag with a big main compartment, slim inner pocket for your phone or keys and hidden stash pocket on top. Specs: • Cordura nylon (or limited edition canvas) • Water resistant zipper • Velcro Straps • 8?L x 5?H x 2

Pack of 2 FTL Elephant bike lights Front- white LED Rear- red LED 3 functions include fast blink, steady blink, and solid Be safe, be seen and avoid tickets. *water resistant silicone body with straps

The GSport Elite Front Wheel fuses the smooth rolling of the Roloway hub with the strength of the double walled Ribcage rim to create a combination that stands up to the battle that is freestyle BMX. To further increase the durability of this wheel, GSport has also included hub guards for both sides so that your spokes are protected from grind damage and the GSport High Pressure Rim Strip to protect your tube. Hub Specifications: Spoke Configuration: 36 hole Hub Shell Material: 7075-T6 aluminum Hub Shell Bearings: 6804RS sealed cartridge ball bearing Axle: 20mm 7075-T6 aluminum female axle with steel heli-coiled threads. Axle Bolts: 3/8? heat-treated 4130 chromoly axle bolts Guard Option: Plastic hub guards included Flange Diameter Left: 44mm Flange Diameter Right: 44mm Center to Flange Left: 28mm Center to Flange Right: 28mm Weight: 340 g / 12 oz Rim Specifications: Sizes: 20" only Drillings: 36 and 48 Width: 36mm Height: 18mm ERD: 389mm Weight: 500 g / 17.6 oz

- Sold in Pairs - Designed With Team Input - 10 Square Molded Pins - Horizontal Concave for Grip - Nylon Plastic Body for Extra Life - 2 Unsealed Bearings - Heat Treated CRMO Spindle - 9/16" Size Only (Fits Three-Piece Cranks) - Weight: 14.5 oz (pair).

Brand New Animal Foursome 4pc Bars from Animal Bikes. The new Foursome Bars are taller 9" rise versions of the massively popular Big 4 Bars. Same post weld heat treated chromoly construction, just featuring new geometry. -Rise: 9", 9.5". -Width: 29" -Backsweep: 11º -Up Sweep: 5º -Color: Black -Weight: 2.03lbs

9.2" Rise 29." Wide 3* Up 12* Back - Multi butted & Heat treated - 100% 4130 Chromoly

Replacement components for the 45NRTH Cobrafist Pogies. Replacement parts for the Cobrafist pogie