Cassettes & Chains

Service kit for 100 hr service (re-adjusting play and replacing wiper). This Service Kit 1 only fits posts that have: "Wiper without spring" There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (no spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

Valve-extension-adapter. Allows easier access to your dropper valve for shock-pumps with short valve heads.

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

These finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can color match your cable guide to the Red and Blue adjustment dials, your frame color, your stem color, pretty much anything! Offered in Black, Gold, Pewter, Red, and Blue anodized finish. Fits: - All Fox 40 Forks until 2013 (IS Brake mount) - 2002–2007 Fox 32 & 36 Forks

The Sonic/Ergo/45AR aerobar offers comprehensive yet simple adjustments, ideally suited to riders wishing to add aerobars to their road, gravel, or bikepacking bike. The Sonic/Ergo platform offers a large range of adjustments in every dimension, enabling riders to optimize the comfort of their positions. This bar can be used for draft-legal triathlon once shortened to meet the ITU Rules. - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Ultra / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Extension Width: 100mm - Weight: 545g

- From a long line of tough, light-weight chain engineering from SRAM - Coupling for 12-speed Sram Eagle chains - Chain connector type: PowerLock - Compatible with Sram Eagle SX, Eagle NX, Eagle GX, Eagle X01, Eagle XX1 models - No tools necessary to install - Color: RAINBOW - 50 Pack

Description This Müve Fit Bike accessory allows for quick and easy saddle changes, as well as fine-tuning of the saddle angle. - Internal side clamping cups with centering springs for easy saddle load and unload - Side cups rotate to accommodate standard 7mm cylindrical rails and 7x9mm carbon rails - Single 5mm hex bolt allows for quick clamping and pressure control - Angle lock nut secures desired saddle angle - 10-degree (+/-) saddle tilt range - No tools needed for tilt adjustment

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Specialized Tarmac Model Year 2018 bottom bracket cover for use with electronic shifting. Specialized S189900021

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Hope Brake Lever Parts

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Replacement piston and seals for Hope disc brake calipers.

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Dia-Compe Star Nut for 1 1/8" Steerer (28.6mm)

- Model: Replacement bolt - Compatibility: Allen, M5x16

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame