Clothing

A triathlon short for all three disciplines and all distances. Take it to the start line of your season highlight or your after-work training session.^Clips to the Castelli Free race top (short sleeve or sleeveless) for all the advantages of a one-piece suit. - The do-everything triathlon short for training and racing - KISS Tri seat pad is comfortable on the bike and virtually disappears on the run - SnapLock fastener at waist to clip jersey into place for swim and bike - Flat-lock stitching - Pocket at center back - Raw-cut leg ending with internal silicone grip elements

A triathlon short for all three disciplines and all distances. Take it to the start line of your season highlight or your after-work training session.^Clips to the Castelli Free race top (short sleeve or sleeveless) for all the advantages of a one-piece suit. - The do-everything triathlon short for training and racing - KISS Tri seat pad is comfortable on the bike and virtually disappears on the run - SnapLock fastener at waist to clip jersey into place for swim and bike - Flat-lock stitching - Pocket at center back - Raw-cut leg ending with internal silicone grip elements

Most of us use long-sleeve jerseys for a few days in the spring and fall, then extend their range with a vest in cooler weather, and then pull them back out for insulation duty under a jacket in extreme cold. So a thermal jersey shouldn't be too bulky or complicated, yet you don't want boring. We built this with all the essential features, like great fabric and fit, perfect pockets, and our lightweight easy-sliding YKK Vislon zipper. - Warmer fabric - Castelli stripe logo across upper chest - Lightweight YKK Vislon easy-sliding zipper - 3 rear pockets with Castelli drop-pocket construction - Reflective piping at back

This mid-weight jacket is perfect for fall and spring rides when you want to cut the chill but don't want to overheat. Add an extra insulating layer and it can take you through most of the winter. Temperature:8°C - 16°C / 46°F - 62°F -GORE-TEX INFINIUM™ WINDSTOPPER® front and sleeves for wind protection with exceptional breathability -Warmer fleece fabric on back for additional breathability -Asymmetrical YKK® Vislon® zipper -3 rear pockets

All the performance of a Castelli race jersey, just without the aerodynamics and tight fit. - Interlock 115 g 100% polyester fabric for excellent moisture management - Medium fit for comfort on the trail or road - Partially covered YKK® Vislon® zipper - 3 rear pockets with extra zippered security pocket - Embossed stripe across chest - No-sew sleeve hem finishing

Does gravel need a new dress code? maybe, but with fat tires and big-tubed bikes with bags on them, an aero jersey just doesn't look right. But why should you give up performance and comfort? that's the concept behind this jersey: all the performance of Castelli's best jerseys except the aerodynamics. First, we created a new fabric with leading Italian knitter Borgini. The lightweight fabric has a small horizontal stripe and a gorgeous soft hand. It maintains outstanding moisture management and ample horizontal stretch but has limited vertical stretch so your pockets don't sag. And it blocks 98% of uv rays. The jersey has a neutral fit to it: straighter in the body, extra space across the chest. Less drop from front to back. The design is clean and technical; even the chest stripe is embossed for tone-on-tone detailing. No more feeling self-conscious at your coffee stop. The jersey is full of thoughtful details, like a covered YKK front zipper, a fourth zippered key pocket, and bonded no-sew sleeve endings. - Interlock 115g 100% polyester fabric for excellent moisture management - Medium fit for comfort on the trail or road - Partially covered YKK Vislon zipper - 3 rear pockets with extra zippered security pocket - Embossed stripe across chest

Equally at home on tarmac or gravel, the Unlimited Cargo Bibshort knows no limits. This four-pocket short is ready for your next adventure. - Made for fast riding on unlimited terrain - Affinity Pro Lycra® fabric on inside of leg for outstanding stretch and rebound - 2 mesh rear pockets built into mesh bib straps - 2 cargo-style side pockets with flap over top to keep stuff from falling out - KISS Air2 seat pad for long-distance comfort - GIRO4 leg grippers

The warmest all-road jersey with extreme performance, disguised as an adventure jersey. - High-loft brushed polyester fleece fabric keeps you warm and dry, while the 5% elastane content helps it stretch for perfect fit - Tight knit keeps some wind away from your skin for extra warmth - 3 cargo-style rear pockets and a zippered chest pocket - YKK Vislon zipper for easy opening/closing - Neutral fit

There's no reason to accept a mediocre short just because you want to wear baggies. This liner is made for ultimate comfort under your baggies. First and foremost, this short features the top-of-the-line Progetto X2 air seamless seat pad. The pad has two separate components: a soft, stretchy skin care layer that coddles your skin, and a separate cushioning layer with dual-density foam and gel pads for progressive damping. The best pad is worthless if moves around, so we've constructed the hip area in our compressive force fabric, which holds the pad in place while providing good ventilation. The legs are light and airy with perforated fabric to keep you cool and are held in place by our gauze-like giro air elastic. The beauty of this leg construction is that you can adjust the length to your preference-so they're long enough to keep your baggy short from rubbing against your leg, for example. Likewise, the top of the short is an exercise in minimalism. The front of the thin bib straps is an open knit that lets air flow right through, while the back is also narrow to stay cool. However, we reinforce the yoke so the straps stay in the right place and don't bunch up. On the back, just above the height of the waist of your baggy, there are three pockets so you can wear this short with a t-shirt and still have space to stash your gear. - Progetto X2 air seamless pad for long rides and rough trails - 170 g force fabric through hips to keep pad in place - Perforated leg panels are light for maximum ventilation and cooling - Giro air leg grippers are cool and hold legs in place - Minimalist bib straps as found on free aero RC bibshort - 3 rear pockets sit above waistband of baggy shorts

Thermal tight for keeping comfortable and warm all winter long. For dry conditions ranging from cool to cold. - Thermoflex fabric for warmth and comfort - KISS Air2 Donna seat pad for long-distance comfort - Drop Tail bib strap design so you can take a nature break without removing straps - Ankle zippers for easy on/off - Reflective band at bottom of leg

The ideal tight for most of your winter riding, the Velocissimo is focused on comfort for riding in mild to cool conditions. We've used our Thermoflex fabric for most of the tight. It's not our warmest fabric, nor does it repel water like Nano Flex, but it is the softest, stretchiest winter tight fabric. The comfort is immediate and lasting. For the lower leg from just below the knee, we switch to our Nano Flex fleeced stretch-woven fabric that's both warm and highly water repellent for protection against spray coming off wet roads. It's also highly stretchy, and we leave a raw edge so we can construct the ankles without zippers while making sure the tight remains easy to put on and take off. The Kiss Air2 seat pad and mesh bibs keep your bum and upper body happy, while large reflective detailing keeps you visible. - Thermoflex fabric from knee to waist for warmth and comfort - Nano Flex stretch-woven fabric with brushed fleece inside at lower leg for splash protection from wet roads - KISS Air2 seat pad - Mesh bib straps - Zipperless ankle to reduce bulk inside shoe covers - Reflective inserts on thighs for visibility on back and sides

Custom BFR PEARL IZUMI PRO BIB SHORT SS23

Ultra-versatile helmet that is light, cool, and sleek with the added protection of WaveCel advanced helmet technology and the convenience of magnetic light mounts. If you're going to get just one helmet, make it this one Whether your finish line is on the race course or at your front door, Bontrager's Circuit WaveCel delivers the right performance, comfort, and tech to be your go-to helmet for any ride. It's equipped with features any rider will appreciate on any terrain, like WaveCel technology, a BOA Fit System for superior comfort and security, and the Blendr mount system for easy light and camera integration. WaveCel is a collapsible cellular structure that lines the inside of the helmet. This Bontrager-exclusive technology disrupts the safety standards the industry has accepted for over 30 years. Product details - WaveCel advanced helmet technology - BOA Fit System lets you easily secure and adjust your fit with one hand - Blendr magnetic mount system easily integrates a GoPro camera and Bontrager lights - Made of 50% recycled EPS material - FlatStrap semi-fixed strap dividers lay flush and move fore and aft for a perfect fit - Soft, comfortable, moisture-wicking, and washable helmet pads - Reflective elements on the back of the helmet offer enhanced visibility - Crash Replacement Guarantee provides free replacement if your helmet is impacted in the first year of ownership

Slashing through the snow Keep motivation high during record lows with OMW Softshell Pant. Designed for the dedicated fat bike enthusiast who wants ample storage for supplies and leg vents to expel extra heat. Key features - Profila Softshell fabric combines warmth and protection - Five zippered pockets—two hand, one hip, two leg - Two zippered leg vents for increased ventilation - Removable internal gaiter keeps deep snow out of leg openings - Zippered double-snap front with internal adjustable waist belt - Zippered leg openings for wide range of boots and easy on/off - Inseam: XS-2XL 32"/81 cm - Semi-fitted cut follows the curves of your body with room for movement Details - Fiber Content: 53% Nylon / 38% Polyester / 9% Elastane - Material: Woven

Take your protection to the next level. Bontrager Specter WaveCel offers the best in versatility and comfort for everyday rides on roads, trails, gravel, and more. From dirt to pavement, fast or slow, this new wave of protection delivers the confidence you need anywhere you ride or race. WaveCel is a collapsible cellular structure that lines the inside of the helmet. This Bontrager-exclusive technology disrupts the safety standards the industry has accepted for over 30 years. - WaveCel advanced helmet technology - The Boa System lets you easily secure and adjust helmet fit with just one hand - Fidlock magnetic buckle fastens effortlessly for a quick, secure fit - Highly ventilated design offers more airflow to keep you cool - Soft, comfortable, moisture-wicking, and washable helmet pads - Reflective elements on back of helmet offer enhanced visibility to be seen - Crash Replacement Guarantee provides a free helmet replacement if involved in a crash within the first year of ownership Sizing: - Small: 51-57cm - Medium: 54-60cm - Large: 58-63cm

Equipped with pro-level technology but designed with the privateer in mind, the Bell 4Forty Air MIPS is the first choice for your next trail helmet. Trail Life The 4Forty Air MIPS is equipped with pro-level features designed with the privateer in mind. With a sleek new shell and 3-position visor, the benefits aren't just visibly rad but functionally significant for increased air ventilation, effective sweat management, and better goggle compatibility. Our Float Fit system, built-in Sweat Guide, and Ionic+ padding ensures all-day comfort, while Integrated MIPS and extended hard-shell coverage help you stay committed in all shred conditions. Upgrades like eyewear ports, a Fidlock magnetic buckle, and premium straps make the 4Forty Air MIPS your go-to for daily trail riding. [Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.] - INTEGRATED MIPS—Integrated MIPS (Multi-Directional Impact Protection System) is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - FLOAT FIT—A minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS). - FIDLOCK BUCKLE—Fidlock is an easy-to-use magnetic buckle. This time saving feature slides closed laterally for an effortless, secure fit. - NO-TWIST TRI-GLIDES—Quick-adjust fasteners that help keep straps flat and properly positioned - SWEAT GUIDE—Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear. - IONIC+ PADDING—Quick-drying interior padding helps manage sweat while fighting odor-causing bacteria. - 3-POSITION ADJUSTABLE VISOR—3-position adjustable visor allows for sun protection and integrates easily with goggles or glasses. - GOGGLE GRIPPER—Rubber grip on the back of the helmet keeps your goggle strap in place. - EYEWEAR STORAGE—Easily stash your glasses using the integrated helmet notches. Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Deep road protection in a helmet that's as comfortable on the road, gravel, or trail as it is commuting to work. The Falcon XR also comes spec'd with a Blackburn Grid tail light to keep you extra visible wherever you ride. The all-rounder When we set out to design the XR Spherical, we were after one helmet to do a bit of everything, from racing cyclocross to touring the world to just KOM'ing your buddies on the weekly lunch ride. With Falcon XR, we've taken many of the same features—"Deep Road" fit, ample venting, Fidlock buckle, IONIC+ antimicrobial* comfort padding—and built them into a helmet that is both utilitarian and economic. This versatile helmet boasts the same "All-Rounder" ethos and slim profile of XR Spherical and features Mips Evolve for impact protection in certain crashes. To top it off, we've integrated a removable Blackburn Grid COB rear light seamlessly into the large rear vent. This 30-lumen "to-be-seen" LED light includes 4 different modes, including Eco Mode that lasts up to 15 hours. What more could you ask for? *(IONIC+ antimicrobial padding uses silver for helmet odor control.) -MIPS EVOLVE Mips Evolve is designed to reduce rotational forces that can result from certain impacts. By integrating the Mips slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. -IONIC+ ANTIMICROBIAL COMFORT PADDING Quick-drying interior padding helps manage sweat while fighting odor-causing bacteria. -FIDLOCK MAGNETIC BUCKLE Fidlock is an easy-to-use magnetic buckle. This time-saving feature slides closed laterally for an effortless, secure fit. -EYEWEAR STORAGE Easily stash your glasses using the integrated helmet notches. -BLACKBURN GRID REMOVABLE LED REAR LIGHT This 30-lumen "to-be-seen" LED light includes 4 different modes, including Eco Mode that lasts up to 15 hours. -NO-TWIST TRI-GLIDES Quick-adjust fasteners that help keep straps flat and properly positioned -SWEAT GUIDE Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear

Deep road protection in a helmet that's as comfortable on the road, gravel, or trail as it is commuting to work. The Falcon XRV also comes spec'd with a visor to help keep the sun out of your eyes and a Blackburn Grid tail light to keep you extra visible wherever you ride. One and done When we set out to design the XR Spherical, we were after one helmet to do a bit of everything, from racing cyclocross to touring the world to just KOM'ing your buddies on the weekly lunch ride. With Falcon XRV LED Mips, we've taken many of the same features—"Deep Road" fit, ample venting, Fidlock buckle, IONIC+ antimicrobial* comfort padding—and built them into a helmet that is both utilitarian and economical. This versatile helmet boasts the same "All-Rounder" ethos and slim profile of XR Spherical and features Mips Evolve for impact protection in certain crashes. We've added a visor for sun protection, and to top it off, we've integrated a removable Blackburn Grid COB rear light seamlessly into the large rear vent. This 30-lumen "to-be-seen" LED light includes 4 different modes, including Eco Mode that lasts up to 15 hours. What more could you ask for? *(IONIC+ antimicrobial padding uses silver for helmet odor control.) -MIPS EVOLVE Mips Evolve is designed to reduce rotational forces that can result from certain impacts. By integrating the Mips slip plane into the retention system, we are able to reduce complexity and weight for a compact, better-ventilated helmet that fits more closely to the head. -IONIC+ ANTIMICROBIAL COMFORT PADDING Quick-drying interior padding helps manage sweat while fighting odor-causing bacteria. -FIDLOCK MAGNETIC BUCKLE Fidlock is an easy-to-use magnetic buckle. This time-saving feature slides closed laterally for an effortless, secure fit. -EYEWEAR STORAGE Easily stash your glasses using the integrated helmet notches. -BLACKBURN GRID REMOVABLE LED REAR LIGHT This 30-lumen "to-be-seen" LED light includes 4 different modes, including Eco Mode that lasts up to 15 hours. -NO-TWIST TRI-GLIDES Quick-adjust fasteners that help keep straps flat and properly positioned. -SWEAT GUIDE Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear.

Built to be as at home on the jump line as it is in the BMX start gate, the Bell Sanction 2 DLX Mips was designed to rule whatever terrain gets in its way. BORN ROWDY Featuring bold new colorways, sleek ID, and technical features borrowed from our industry-leading Full-10 platform, Sanction 2 DLX has redefined the expectations for an affordable, lightweight, park helmet. During the ground-up design process, our engineering team focused on three core performance tenets: Fit. Breathability. Value. Fit and breathability are amply handled via our Ventilated DH Air padding and the Ionic+™ Antimicrobial comfort liner, which uses silver metalized yarn for helmet odor control. We spec'd the helmet with 14 vents to prioritize ventilation, regardless of where the helmet is being ridden. And we've added a Fidlock® buckle for easy, one-handed release. Finally, in addition to both ASTM Downhill and BMX certs, we included Mips® to help reduce rotational forces in some impacts. We did all of this with you, the privateer, in mind. This helmet was born rowdy and will never look back. - IONIC+™ PADDING — Quick-drying interior padding helps manage sweat while fighting odor-causing bacteria. - FIDLOCK® MAGNETIC BUCKLE — Fidlock® is an easy-to-use magnetic buckle. This time-saving feature slides closed laterally for an effortless, secure fit. - FLYING BRIDGE VISOR TECHNOLOGY — This visor design allows more flexibility and improves airflow across the helmet. By not using a traditional center post and screw concept, we're able to increase the amount of energy management material in a high-impact zone. - MIPS® ESSENTIAL — Mips (Multi-directional Impact Protection System) is a leading slip-plane technology inside the helmet designed to help reduce rotational forces that can result from certain impacts. Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older - ASTM-1952-DH - ASTM-2032-BMX - EU: CE EN1078 Any Bell helmet determined by Bell to be defective in materials or workmanship within one (1) year from the date of original purchase will be repaired or replaced, at Bell's option, free of charge when received at the factory freight prepaid, together with proof of purchase.

Sketchy rock drops, mach speed alpine forest tunnels, slippery river rocks — trail riding can mean a lot of different things. Our premium trail helmet, the Sixer Mips, is designed to handle it all. The last thing you want to be thinking about in the middle of a long backcountry ride is your helmet. It should be well-ventilated. It should protect your head. And it should fit so well that you don’t know it’s there. The Sixer Mips takes to the trail with our Integrated Mips technology, resulting in a sleeker, closer-to-the-head fit that combines with our Float Fit system and proprietary Sweat Guide to ensure unprecedented comfort in a helmet. Goggle compatibility, complete with a strap gripper at the rear of the helmet, adjustable visor height, integrated camera/light mount, and a full hard shell round out the package. We’ve sweated every detail on the Sixer so that out on the trail, the only sweating you’ll have to worry about is your own. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information. CONSTRUCTION: - FUSION IN-MOLD POLYCARBONATE SHELL - PROGRESSIVE LAYERING - EXPOSED POLYCARBONATE ROLL CAGE VISOR: - 4-POSITION ADJUSTABLE VISOR VENTILATION: - DUAL FLOW VENTILATION FIT SYSTEM: - FLOAT FIT RACE PRODUCT WEIGHT: - CPSC: 395G (SIZE M)|CE: 380G (SIZE M) CERTIFICATION: - COMPLIES WITH THE US CPSC SAFETY STANDARD FOR BICYCLE HELMET FOR PERSONS AGE 5 AND OLDER

The last thing you want to be thinking about in the middle of a long backcountry ride is your helmet. It should be well-ventilated. It should protect your head. And it should fit so well that you don't know it's there. The Sixer takes to the trail with Bell's integrated MIPS technology, resulting in a sleeker, closer-to-the-head fit that combines the Float Fit system and Sweat Guide to ensure unprecedented comfort in a helmet. Goggle compatibility, complete with a strap gripper at the rear of the helmet, an adjustable visor height, integrated camera/light mount and a full hard shell round out the package. Bell sweated every detail on the Sixer so that out on the trail, the only sweating you'll have to worry about is your own. Specs - MIPS (Multi-directional Impact Protection System) - a leading slip-plane technology designed to reduce rotational forces that can result from certain impacts. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Progressive layering: the process of engineering a helmet liner with variable EPS foam densities to better manage the transfer of energies after some impacts - Exposed polycarbonate roll cage - 4-position adjustable visor: the no-slip design allows on-the-fly adjustments so the rider can position visor at desired angle with a simple tug up or down - Number of vents: 26 helmet vents, 4 brow ports - Interior/liner type: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear; X-static padding - quick-drying materials, woven with real silver fibers, inhibit growth of odor-causing bacteria and fungi - Ventilation Type: Dual flow ventilation features air ports along the brow to provide ventilation and help defog goggles - Fit system: Float Fit Race - a state-of-the-art lightweight fit system featuring seamless integration with MIPS, an easy-to-turn dial, wide-range vertical adjustment and padded width-adjustable cradles - Weight 410 grams (size M) - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm - X-Large = 61 – 65cm

Built with the same core design principles as the pro-level Z20, the Stratus combines lightweight aero efficiency with cutting-edge comfort technologies. The shape was refined for all-around road performance—ventilated for long climbs but still fast for the flats—and the integrated Float Fit system offers comfort and security with a streamlined fit and an oversized dial that’s easy to adjust with one hand. The Overbrow Ventilation system pulls cool air in through the front and pushes it through an air-channel matrix to reduce overheating. And thanks to the adjustable No-Twist Tri-Glides, the straps stay flat and properly positioned no matter how hard you’re hammering. This model also includes MIPS (Multi-Directional Impact Protection System) for added protection in certain types of impacts. - 18 vents - Overbrow ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation - Compliance: CPSC bicycle - MIPS-equipped - MIPS stands for multi-directional impact protection system, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Lightweight internal polycarbonate roll cage - Fit System: Float fit: a minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS) - Retention System: No-twist tri-glides: quick-adjust fasteners that help keep straps flat and properly positioned - Lightweight Straps - Interior: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear

Assos T.Milleshorts S7 Shorts Color: Black Series

Assos H.Milleshorts S7 Shorts Color: Block Black

Done up in majestic purple for podium-winning style, the Dot Game Jersey is sourced from our friends at Pactimo in Colorado. Featuring a short-sleeved race fit and three rear pockets, the jersey’s wicking high-tech polyester, mesh side panels, and full zipper will keep you cool as a cocktail when the weather turns swampy. - All-City graphics printed on the Pactimo Ascent Aero Mesh jersey - Wicking high-tech polyester, mesh side panels, and full zipper for excellent breathability - Three full-size pockets allow you to load up for a long day in the saddle

- Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Crash release visor system - Easy position visor, no bolts needed - D Ring closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 57 – 58cm - Medium = 59 – 60cm - Large: 61 – 62cm - X-Large: 63 – 64cm - XX-Large: 65 – 66cm

The Grünnur base layer is the foundation of any cold-weather kit. Soft Merino wool wicks moisture away from the body and insulates even when wet. It’s designed for a comfortable fit without bunching up underneath other layers. - 89% Merino wool-blend fabric insulates even when wet - Long drape in back for extra coverage - Raglan sleeves for more range of motion Comfortable Fit Designed to fit comfortably under the Naughtvind Jacket without bunching up underneath Cycling Specific Base Layer Raglan sleeves for mobility, long drape in back for extra protection, comfort across shoulders when in the riding position

In the battle between you and the bitter cold of winter, there’s only one line of defense: 45NRTH’s Naughtvind Jacket. Built for maximum comfort and warmth, our premium jacket finds inspiration in its Doubleweave fabric — a triple-threat of ingenuity designed to breathe, stretch, and protect you from the nastiest of weather. - Doubleweave main fabric provides the best combination of weather protection, breathability & stretch, while grid knit fleece side panels allow even more breathability - Asymmetric zipper prevents chin rub - Special collar shape offers the option for extra face protection in riding position without adding extra bulk - Black reflective material placed in key areas enhances your visibility in low-light situations - Three large, easy-to-access rear pockets to stash ride necessities - Strategically positioned zippered chest pocket avoids interference with pack straps - Zip-closure back ventilation helps dump excess body heat - Silicone taping at bottom hem to hold jacket securely in place

For days when the mercury plugs below 15 degrees (-9°c), Sturmfist 4 provides unmatched performance by combining superior fabrics and insulation technologies. - Water/wind-resistant shell on back of hand - Water-resistant leather on palm  - 300g Polartec Alpha insulation - Aerogel insulation in palms protects against conductive heat loss

Sturmfist 4 combines high-tech materials and proven design for the best winter bike gloves out there. Wind-and-water-resistant shell fabric, Primaloft insulation with aerogel, a leather palm, and drawstring gauntlet closure make frigid winter rides easier. Stay warm with Sturmfist 4. - Wind- and water-resistant soft shell outer - Goatskin leather palm - Primaloft 8 oz Gold Insulation with Cross Core Aerogel technology - Primaloft Gold Insulation Eco with Grip Control - Merino wool blend lining made from 35% recycled materials - Drawstring gauntlet cuff closure - Conductive synthetic leather on thumb and index fingers is touch-screen friendly - Pre-curved fingers for natural hand position on handlebars