Parts

- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

- Patented oval bar shape increases vertical compliance and combines the best characteristics of 31.8 & 35.0mm diameter handlebar standards - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g

- OneUp's dropper line covers 70-240mm drops in 10mm increments - Shortest overall length and stack height of any equal length dropper on the market - Travel adjust shims allow travel customization of either 10 or 20mm (2 - 10mm shims included with post) - Cable actuated for easy installation and a simple, no-bleed remote (sold separately) - Reliable sealed cartridge internals - New upper DU bushing in collar for increased bushing overlap - Total length measurement is from saddle rails to the bottom of the actuator - 2 year manufacturer warranty

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when originally introduced in 1999, and they have since gone on to change the standards that all forks are judged by. Features: - Fully redesigned - Laboratory tested and team proven - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - New, optimized, 4mm dropout shape for grind and peg clearance - Updated 7075-T6 pre-load bolt, US Pat. No. 7,591,474 - Proven 41-Thermal processed 4130 chromoly - Legendary lifetime replacement warranty Specs: - 25mm steep offset - 3/8-inch axle slots only - 990 brake mounts - Starting at 2lb 2oz (912 grams)

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

Hydraulically actuated cantilever post mounted rim brake delivers maximum power and excels at trials and e-bike applications. Features: - Flip/Flop composite brake Lever with Reach adjustment - Brakes mount to fork or frame posts - 464g per wheel Specifications: - Material: Aluminum - Pad Attachment Style: Threaded Post

No matter how difficult the trail terrain, Magura's 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Their use of Carbotecture technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance. - An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance - Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium - Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir - Double Arch forged 4 piston monoblock caliper design that features anti-heat, anti-drag and anti-squeal and magnetiX brake pad system for easy pad replacement - Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty - Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

The Magura MT5 HC Disc Brake and Lever set offers excellent braking performance at an unbeatable pricepoint. - The 4-piston brake caliper forged in one piece has a high degree of rigidity, resulting in outstanding braking force and the best possible modulation - Flip-flop lever design works on right or left side with either brake - 1-finger lever blade

- The same performance as the high-end MT8 SL model at an attractive price - Equipped with a 1-finger HC aluminium lever blade - Suitable for mounting left or right

MRP Micro G2 SL Chain Guide 28-32T ISCG-05 White

With LOOK Activ Grip by Vibram and LOOK Vision In Lighting our Geo City Vision Grip is the ultimate urban pedal. Combining 24/7 LED safety, iconic mountain boot traction and MTB-toughness with Tour de France winning performance and unmatched personality, there’s no better place to put your feet for town and country riding. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 290g - Weight (pair): 580g - Waterproofness: IPX 7 Waterproof rating - Light included: Yes (x4) - Light modes: 4 (steady/day flash/night flash/flash eco) - Battery Life: Up to 20h (flash eco) - Auto stop/start system - Light output: From 6 to 50 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 2h - Beam angle: 180°

Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g

KEO BLADE CARBON pedals feature a Chromoly+ axle and stainless steel bearings for extreme reliability. Beyond its weight, the surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to take it to the next level. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 8 + additional 12 in box - Body: Carbon - Blade: Composite - Spindle: Chromoly+ - Bearings: Steel - Platform area: 700mm² - Platform width: 67mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 115g - Weight (pair + cleats): 300g

Product details: - This bottom bracket fits a Sram DUB crank set on a traditional BSA threaded frame - Extremely reliable and efficient bottom brackets with coated ceramic bearings, tight variances and industry-leading durability - Reduced friction and better protection from nature`s elements - Long lasting durability and extreme performance - Installation tool required: Park Tool BBT-79

Kink Foundation II forks are a traditional style fork that still utilizes the latest technologies and materials available. Available in two different offsets to suit any riding style, the 26mm offset dropouts offer a quicker more responsive feel while the 32mm offset provides a more classic and stable ride. The investment cast fork leg ends provide a clean and smooth look, while the laser-cut and CNC'd dropouts provide the classic shape and provide ample strength. The tapered outer profile and internally butted fork legs keep the strength and weight right where they should be. A one-piece fully CNC-machined steerer tube with integrated bearing race helps keep things a little bit simpler too. TECH SPECS - Fork Height: 315mm - Steerer Tube Length: 165mm - Dropout Offset: 26mm or 32mm - Dropout Slot: 3/8" (10mm) - Bearing Race: Integrated Campy Spec - Compression Bolt Thread: M24×1.5mm - Compression Bolt Hex: 7075-T6 3/8" Ratchet and 6mm Allen Key - Tubing Material: 100% 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Particulars: Tapered Fork Legs with Internal Butting - 4mm Laser-Cut Dropouts - Weight: 34.8oz (Including Fork Bolt)

KINDSHOCK E20 Seatpost Internal cable routing, one-piece forged stanchion, cartridge-based architecture, micro-adjust head. Designed for internal cable routing Unprecedented value in a dropper post Remote sold separately Available in all rider preferences from 65mm to 150mm Internally routed cable connector Compatible with all KS Southpaw, KG and Westy remotes

- Internal cable routing - Precision machined alloy mast - One-piece 3D forged stanchion - Micro-adjustable head - Air sprung hydraulic steel cartridge - Cable and housing included - Remote not included - Length is measured from saddle rails to the bottom of the actuator

Rage-i is dropper performance at a never-before-seen value. Being our KS's entry-priced offering, Rage-i leaves nothing to compromise. Rage-i features a two-bolt micro adjust head, stanchion tube that doubles as an open bath hydraulic cartridge body and an overall weight that gives competing droppers at three times the price something to worry about. - Micro adjustable head clamp with black steel bolts - Air sprung hydraulic open bath cartridge - Black hard anodized stanchion - Precision machined alloy mast with integrated seal collar - All new keyway system - Internally routed polycarbonate cable connector

Rage-i breaks new ground with never-before seen performance and weight at such an affordable price point. WHAT’S NEW + Updated cylindrical upper clamp nuts do not spin + More vertical head clamp bolt angle + Dedicated cartridge architecture is reliable and smooth + Lightweight, rotating bottom actuator + Reduced actuation force + Longer travel options + Remote sold separately (Click here to view Remotes) FEATURES + Alloy stanchion + Weight optimized alloy mast + Air sprung hydraulic cartridge + Press fit bushing and dust wiper + Designed for internal frame routing + Short insertion length to travel ratio + Compatible with all KS Southpaw, KG and Westy remotes

- Super-light chain for use with 10-speed Campagnolo/Shimano/SRAM with Diamond Like Coating for extra durability - Use: Mountain/Road - Size: 1/2 x 11/128-inch - Width: 5.9mm - Weight: 253g - 116 links

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

- Lightweight, 3D forged, 2014 aluminum alloy - Proprietary Stealth recessed cable routing system enhances aerodynamic performance - Oversize box-section increases torsional stiffness with tuned vertical compliance

Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever

With an anatomic cut-out shape and advanced technology, materials and craft, Antares R1 Open is a leading performance road saddle for riders who want a medium saddle profile and a cut-out to avoid pressure and numbness. Made for Chameleon riders with medium body flexibility and low pelvic rotation while pedaling, the Antares is a neutral profile saddle with support and flexibility so you can move to find your power spot and maintain comfort. The Large model is the wider of the two options. Antares R1 Open features a composite Carbon-reinforced nylon shell and a light, strong, Braided Carbon rail. Antares R1 Open avoids pressure on the rider’s sensitive soft tissue and ensures that all weight is correctly supported across the whole surface of the saddle. Like all performance fi’zi:k road saddles, Antares R1 Open is light, flexible and agile. It's designed for pros, with pros and raced by pros. With an anatomic cut-out shape and advanced technology, materials and craft, Antares R1 Open is a leading performance road saddle for riders who want a medium saddle profile and a cut-out to avoid pressure and numbness. - Open central cutaway - Shell: Carbon-reinforced nylon - Rail: 7x9mm Carbon Braided - Cover: Microtex - Dimensions: 274x152mm - Weight: 190 grams - Integrated Clip System compatible - Spine Concept: Chameleon

All fi’zi:k saddles are designed with and for the world’s very best pro racers, ensuring enhanced comfort and ultimate performance. Fizik's extensive three-year research project shows that there is demand for a collection of wider-fitment saddles to complete the selection for optimum fit for every rider. The Antares R3 K:ium benefits from improved weight distribution and a host of fi'zi:k technologies including a strong, supportive Carbon Kevlar thermoplastic composite shell and alloy K:ium rail, and Wing Flex which enables flexibility where your thighs meet the saddle. - Shell: Composite glass co-injected Nylon WingFlex - Rail: K:ium - Cover: Black Gummy Microtex - Thigh Glides: Black Microtex - Weight: 205 grams - Dimensions: 274x152mm - Integrated Clip System compatible - Spin Concept: Chameleon

All fi’zi:k saddles are designed with and for the world’s very best pro racers, ensuring enhanced comfort and ultimate performance. Fizik's extensive three-year research project shows that there is demand for a collection of wider-fitment saddles to complete the selection for optimum fit for every rider. The Antares R3 K:ium benefits from improved weight distribution and a host of fi'zi:k technologies including a strong, supportive Carbon Kevlar thermoplastic composite shell and alloy K:ium rail, and Wing Flex which enables flexibility where your thighs meet the saddle. - Shell: Composite glass co-injected Nylon WingFlex - Rail: K:ium - Cover: Black Gummy Microtex - Thigh Glides: Black Microtex - Weight: 200 grams - Dimensions: 274x140mm - Integrated Clip System compatible - Spin Concept: Chameleon

- Cold forged AL6061/T6 aluminum crank arms - Forged AL7050 BB386EVO spindle - AL7075 100% CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems