Parts

Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel

The forged aluminum Spyke Levers have all the features you would expect from TRP: the ergonomic 2-finger design, Teflon bushings, forged clamp, and return spring. Mated to our Spyke calipers, these levers connect rider and machine for near-telepathic braking feel. - Lightweight design - Ergonomic lever design - Alloy lever and bracket - Teflon bushings - Stainless steel hardware - 2-finger lever blade - For use with RapidFire shifters - Weight: 156g/pair

The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.

Designed for the SCOTT Spark 900, our Down Country stems have a zero degree rise and are availabale in a range of stem lengths to suit every rider and riding preference. Constructed from 7050 aluminium. FEATURES - Designed for Down Country riding - Forged and machined AL7050 - Closed type face plate for most integrated design - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - incl. stem topcap and bolt - Lengths: 50-80mm

The Squamish II features a die cast aluminium pedal body for strength with 2 sealed bearings in the pedal and replaceable pins. The platform is wide to support the foot in the most stable way. - Die-cast aluminium - Replaceable pins - 2 sealed bearings - Wide profile

KEY FEATURES: - Fits Scott Addict and Solace bikes Addict, Solace, 1 1/8" - 1 1/4" Tapered, Drop-In, IS41/28.6 | IS46/34, Alloy, sealed cartridge, 9.0mm stack height BEARINGS: sealed cartridge bearings FEATURES - For Scott Addict and Solace Bikes

Excellent modulation, cooler temperatures and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. Fits: - Campagnolo 10|11|12 speed DOES NOT FIT - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black

The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

- Cantilever brake mounts - 45mm rake - Hi-tensile steel construction - Steerer Type: Threaded - Steerer Size: 1-inch - Brake Mount: Cantilever - Rake: 45mm - Axle-to-Crown: 405mm - Thread Length: 120mm - Axle: QR 9mm

• Cantilever brake mounts • 45mm rake • Chromoly construction • 1 1/8-inch steerer diameter • Threadless fork

The Saker Cranks are designed to be an affordable 3-pc crank with tubular chromoly arms that have a single pinch bolt design. It uses a 19mm chromoly spindle with 8 splines. The cranks include a 19mm Mid BB with spacers. RHD/LHD compatible - Tubular chromoly 3-piece - RHD/LHD compatible - Includes mid-sized bottom bracket

The Sunday Knox V2 guard sprocket made of 7075-T6 aluminum. Featuring refined machining geometry for a sleeker look, and designed to work with and protect all chains from unwanted impact. - Full guard on one side of the sprocket with 5 rotatable sprocket bolt hole positions - CNC machined 7075-T6 aluminum - Designed to work with and protect all BMX chains

RS3 Cassettes are a great replacement for 11-speed road sytems. - Lightweight wide-range Road cassette compatible with HG 11sp road freehub bodies - Steel cogs (top 3 mounted to spider), steel lockring, and composite spacers - Cassette Body Type: Shimano/SRAM 11 Speed Road - Drivetrain Speeds: 11 - Cogs: 11,12,13,15,17,19,21,23,25,28,32 - Weight: 332 g

Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.

The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

Upgrade to Specialized's Romin Evo Comp Gel Saddle and enjoy comfort like never before. Its extended cutout, Body Geometry ergonomics and lightweight padding with gel all ensure that no matter how far you ride, you'll feel great. Plus, the Romin boasts hollow-chromoly rails and a durable, water-resistant Micromatrix top. And, it's available in 3 widths for a perfect fit.

- Lightweight 780mm wide handlebar for Trail or All Mountain riding - Big and burly 35mm barclamp - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g - Diameter (mm): 35 - Rise (mm): 25 - Length (mm): 780 (adjustable to 740) - Geometry (deg°): 5° up x 8° back - Finish: Shot peen anodized

The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle

- Large platform 100mmx105mm size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance

- Crank Boot Compatible Axles - Full Anodized Finish - 12mm Thin—Massive 11x11cm Platform - Cold Forged Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Chamfered Side Edges for Improved Cornering Clearance - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - 18 Adjustable Pins per Pedal - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized

- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life Features: - Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included - Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate - Rise (°): 0 - Diameter: 31.8mm - Stack Height: 34mm - Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm) - Finish: Shotpeen anodized

- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars

A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

- Large platform size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body in eight color options - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance - Material: Alloy - Platform Size (mm): 100 x 105 - Platform Profile: (mm) 16mm - Weight (g): ±395/set - Axle: Cold-forged Chromoly steel - Bearing/Bushing: Industrial bearing, IGUS bushing - Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity - Finish: Mottled / grunge anodized

Nastro Cuscino is a Tri-Laminate 3.75mm-thick tape that provides cushioning and comfort equivalent to 5mm of traditional bar tape foam. CUSCINO has a strong texture, medium-high tackiness, and printed silicone graphics which adds comfort and grip in both wet and dusty conditions. Inspired by advancements in running shoe foam and F1 tires as well as our own research into rolling efficiency, impedance, and damping, we realized that new materials technology could allow for a significant improvement in bar tape. Using a laminate of SILCAthane, SILCAlon, and 3M Visco-elastic adhesive instead of a single-foam extrusion, the tape can be optimized across a range of desired features. The resulting tape has a softer, more comfortable feel, higher wet and dry grip, better vibration isolation, and 3-5x the durability of existing tape materials. Since the actual wrap of the tape can be as important as the tape itself, we've also developed a full adhesive-backed 'butterfly' to better cover the back of the lever clamp area without adding bulk, a high-grip finishing tape, and expanding aluminum/composite end plugs to ensure every detail is perfect. - Ultra Performance 3.75mm-thick Tri-Laminate design delivers equivalent cushioning to 5.0mm tapes of traditional materials - SILCAlon (2-Hour Marathon Shoe foam) offers greater cushioning and 3-5x more rebound for improved performance over rough surfaces - Debossed racing stripe pattern plus embossed color silicone printing for improved grip and cushioning - Laser-engraved aluminum expanding bar-end plug - TPU finishing tape with full 3M adhesive - Butterfly-shaped brake clamp cover

Traditionally, mountain cleats have only had two material options. Mild steel and brass. This has largely been to ensure that the cleat wore out faster than the pedal interface, but has left us with cleats that are often times very fast wearing, and in all cases, are quite heavy. Enter 6/4 Titanium, only slightly less hard than tool or spring steel used in the pedals, it's a remarkable 2.25 times stronger and 3 times tougher than brass or mild steel. Best of all, the extreme toughness and abrasion resistance of 6Al/4V titanium means that you can expect 300-400% wear life compared to traditional materials. Now we couldn't just stop there, but by combining 3D printing technology with this material that is 1/3 lighter than steel, we are able to achieve a cleat with internal lattice structure (called a gyroid) which maintains stiffness and strength while reducing weight to create a cleat set that is HALF the weight of a standard cleat set. This savings of 25-30 grams per set of cleats is significant over time, particularly in CX events where running is crucial. 25gm reduction x 100 rpm = 180kg of mass not lifted per hour of riding, 90kg per leg!

Lever: Intuitive and powerful braking Quicker brake engagement with shorter free stroke Rider tunable and action-optimized cockpit High-performance brake control Additional contact point for a stiffer brake lever 10 deg. rotation angle setting range for I-SPEC EV shifting lever Lever: MT4100 Caliper: 4-piston caliper instills greater downhill confidence and control Post Mount 90% braking power vs. BR-MT520 20% increase braking power vs. current 2-piston BR-MT400 150% better wear-resistance vs. current 2-piston BR-MT400 Caliper: BR-MT420 Pad: Metal w/o Fin (J-Kit); Resin w/o Fin (Pre-Bled) Brake Hose: SM-BH90-SS Brake Fluid: mineral oil Color: Black Available in Pre-Bled or J-Kit versions J-Kit Technology: For some frames with internal routing, the J-Kit version may be easier to install, since everything is pre-bled. Disconnected lever comes pre-bled with connecting bolt/built in olive pre-installed. Brake caliper is pre-bled with brake hose connected/capped.

Shimano 105 BR-R7000 road caliper brakes offer a clear contact feeling with balanced rigidity, weight and stopping power. - More predictable, linear braking curve - Narrower gap between arms - Compatible with wider 28C tire size - Clear contact feeling with balanced rigidity, weight and stopping power - Sleek design - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Lever Actuation: Short Pull - Pad Type: Cartridge

Shimano 105 BR-R7070 Ice Tech Disc Brake Caliper Flat Mount Utilizing Shimano’s lightweight and sleek flat mount design, the BR-R7070 hydraulic disc brake caliper features premium stopping power and aerodynamics for road applications. The new SM-RT70 rotor offers Ice Technologies construction for excellent heat management for confident performance on the longest descents. - Increased rider control in all conditions - Sleek Flat Mount design integrates seamlessly into a road bike’s aero profile - Ceramic pistons - Recommended brake lever: ST-R7020, ST-R7025 - Recommended rotor: SM-RT70 - Caliper fixing bolt (4 mm) made of steel - Application: Cyclocross, Gravel, Road - Brake Type: hydraulic, 2 pistons - Hydraulic Fluid: mineral oil - Hose: SM-BH90 (not included)

- Shimano 105 R7000 Series CS-HG700-11 cassette - Average weight: 379g - Combination: 11-13-15-17-19-21-23-25-27-30-34T

The Shimano 105 FD-R7150 Di2 front derailleur provides precise, coordinated front shifting. Features full- and semi-synchronized shifting functions that can be selected using the E-TUBE app. Digitally accurate electronic shifts and coordinated communication between shifter and derailleur Shift from the big to small chainrings, or vice versa, whenever you like while minimizing the risk of a dropped chain Powerful, accurate, smooth front shifting with the programmed chain guide control by automatic trim Shimano SYNCHRONIZED SHIFT for manual, full- and semi-synchronized shifting program

- Shimano 105 R7000 Series CS-R7000 11-speed cassette - Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T) Combinations: - 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T - 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T - 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T - 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T

HYDRAULIC DISC BRAKE, BR-R7170, 105, FLAT MOUNT, W/FIXING BOLT FOR MOUNT THICKNESS 25MM, W/O ADAPTER, W/L03A RESIN PAD (W/FIN)

Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

Compared to the power transfer of the conventional square taper spindle, the 8-splined OCTALINK interface that connects the bottom bracket and crankset increases the strength and rigidity for the entire assembly.

The Shimano CN-M9100 features an extended inner link plate that connects seamlessly with chainring teeth for highly efficient drivetrain performance. Its design offers a reduction in natural vibrations normally caused by the inner and outer chain plates rolling onto the chainring. It provides better chain engagement, stronger retention, and smoother pedaling. - Enhancements to shifting performance - Easy connect - Non-reusable - Smoother driving even over bumpy terrain - Compatible with Shimano Quick Link SM-CN910-12 - This chain meets durability requirements for E-MTB applications

Find new ways to enjoy trekking and daily flat-handlebar riding with this reliable rear Shimano CUES RD-U6020 Shadow derailleur's seamless shifting and pedaling. Its low-profile design and chain stabilization give riders the confidence to choose rougher routes. Plus, e-bikers will benefit from reliable, long-lasting performance thanks to its eBike rated design. - Stable drivetrain performance on trails, gravel, and city streets - Shadow low-profile design protects rear derailleur from obstacles in a wide variety of riding scenes - Designed and tested to provide enduring e-biking performance - 11t upper and 13t lower pulley wheels - Compatible with LINKGLIDE AND HG 11-speed chains

Create a more active urban lifestyle with this durable Shimano CUES RD-U8000 Shadow+ rear derailleur's smooth and decisive shifting performance for 1x11-speed systems. Its low-profile design and chain stabilization give riders the confidence to choose rougher routes. Plus, the premium machine-finished aluminum textures showcase the integration of design and engineering. - Seamless shifting and pedaling performance that's made to last - Chain stabilizer reduces chain drop, slap and noise - Shadow+ low-profile design protects rear derailleur from obstacles in a wide variety of riding scenes - Stylish and polished aluminum finish with machine-cut textures - 13t pulley wheels - Compatible with LINKGLIDE AND HG 11-speed chains

The Shimano CS-M5100 11-speed cassette is designed for use with Deore M5100 drivetrains. Perfect for front single and double MTB drivetrains Shimano's M5100-11 cassette offers Rider Tuned gear steps for maximum cadence control across the varied terrain of mountain biking.

The Shimano CS-M6100 12-speed cassette is designed for use with Deore M6100 drivetrains. - Use with Hyperglide+ chain - All steel cogs - Designed for single front chainring setup - Micro Spline interface Specifications: Color: Silver Cassette Body Type: Shimano Micro Spline Drivetrain Speeds: 12 Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 Range: 10-51

OUTER RING MATERIAL: Steel + GF composite CRANK AXLE MATERIAL: Steel CRANK ARM FINISH: Anodized COMPATIBLE BB TYPE: Outboard CRANK AXLE FINISH: Plated GEAR ARMS: Direct Mount COMPATIBLE CHAIN: HG+|12-speed SERIES: Deore GENERATION: M6120 CRANK ARM LENGTH: 170,175 CHAIN RING COMBINATION: 30,32 OUTER RING FINISH: Painted CRANK ARM MATERIAL: Aluminum

Deore M4100/MT420 offers powerful, intuitive braking that is easy to reach so you can keep the rubber side down. Cascaded technology from XTR to XT to SLX makes the Deore M4100 brake an excellent choice for all riders, especially new riders. With I-SPEC EV clamp bands providing an additional contact point for a stiffer brake lever, 2-finger lever position, and powerful four-piston MT420 calipers, Deore M4100 is a winner.

- 2-PIECE CRANKSET for 142 mm or 148 mm O.L.D. frames -DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 172 mm - Direct mount chainring - Chain Line 52 mm - 1x12-speed TL-FC41 Not Included

The Shimano RD-M6100 Rear Derailleur provides efficient and smooth shifting for Deore M6100 12-speed drivetrains. - Features the Shadow RD+ chain stabilizer system to minimize chain slap - Fast and precise shifting -13T pulley - For single front chainring setup - 51T max cog size Specifications: - Color: Black -Largest Cog: 51 - Rear Derailleur Mount Type: Shimano Rear Direct Mount , 10x1 Standard - Rear Der/Shifter Compatibility: Shimano Mountain - Cage Length: Long - Drivetrain Speeds: 12

• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference

- Easy Operation And Accurate Shifting - Wide Comfort Lever With Position Adjust - Effortless Multi-Shift - Multi-Shift Speed, Shimano Synchronized Shift - Ergonomic Rotary Switch - Short Stroke Perfect Click (Single Click, Auto Multiple Shift Only) - Customization Of Operation - Suspension Control By Left Switch

Shimano XT CS-M770 9-Speed Cassette - Aluminum carrier reduces weight and increases rigidity - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Weight: 323 grams

Shimano XT CRM80 1x11 Chainrings - Hollow gear construction for optimized rigidity, weight, and rigidity - Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body - Dyna-Sys11 HG-X11 11-speed chain compatible - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Steel/Carbon - Ring Position/Type: Chain Retaining Single Ring - Tooth Count: 30

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/