Your Search: "niterider"

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. Our favorite feature is the side "gills" that emits light, it not only looks cool but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. The TL 6.0 has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 6.0 will help keep you safe and seen from behind (180-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Mako 200 - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - Run Times: 15:00 – 60:00 hours - 3 light settings—High, Low, and Flash - Water / Dust Resistant IP64 Rated TL 6.0 - 5 Ultra Bright LEDs - Up to 60 hours run time - Cost-effective, high-quality light - Super bright day time flash mode - 3 operating modes - Runs on AAA batteries - Water / Dust Resistant IP64 Rated

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 1500 - Battery: Li-Ion - Recharge Type: USB

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

Boasting 4200 lumens and 6 CREE LEDs at 6000k; the Pro 4200 Enduro offers 4 brightness settings and a daylight flash mode that are factory-tuned to optimize riding in any condition. And, a long-lasting 8-cell battery that doubles as a USB portable charger makes this lighting system perfect for long night rides, high speed MTB descents, or backcountry touring. - Ultra bright 4200 lumen output - 8 Cell Li-Ion battery, doubles as a USB portable charger - Remote switch for ease of operation - The preferred light for serious MTB riders - Highly durable light housing with Dupont Fiberglass reinforced nylon - Perfect for handlebar mounting - FL 1 Standard IP64, dust and water-resistant - 4 steady light modes and 1 daylight flash - Custom 3 cone dual-beam reflectors utilizing 6 CREE LEDs at 6000k - Convenient nylon storage pouch Warranty: - The Pro 4200 Enduro Remote is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. System Includes: - LED Headlamp with Remote Switch - Li-Ion Battery/USB Portable Charger - Handlebar Mount - Fits up to 35mm - AC Adapter - Nylon Storage Pouch

We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. Mako 250 - Low cost, high powered light - Highly visible in traffic = keeps you safe - Run Time: 7:00 – 28:00 hours - 3 light settings—High, Low, and Flash - Tough durable design - Water / Dust Resistant IP64 Rated CherryBomb 100 - Daylight Visible Flash (DVF) - Up to 136 hour run time - Visible up to 1 mile - Internal reflector = visible if light in off mode - Easy to operate AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - Water / Dust Resistant IP64 Rated

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems

Lumina Micro series delivers high output in a small package, making it great for helmet usage. Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab - 4 light levels plus a flash mode - Lumina Micro 900 and 650 include a VMAX+ - Lumens: 650/80 - Run time: up to 50 hrs F/up to 27 hrs R - Weight: 130g/28g

With a 2200 lumen output, you'll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon. FEATURES - Lumen Output: 2200 - 7 Modes with Run Times: 3:00 – 50:00hrs - Charge Time: 5:00hrs - Weight: 702g - Battery: Li-Ion - 8 Step Fuel Gauge - Handlebar and Helmet Mountable - Water / Dust Resistant IP64 Rated RUN TIMES Low—12:00h at 500 Lumens Medium—6:00h at 800 Lumens High—3:00h at 2200 Lumens Flash—50:00h at 730 Lumens Beacon—50:00h at 730 Lumens S.O.S.—50:00h at 730 Lumens Race—50:00h at 250 Lumens

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

- Waterproof (10,000mm) - Highly breathable (10,000gm/24hr) - Micro fleece-lined collar for added comfort and warmth - Quick-dry mesh lining for extra comfort - Utilises our REFLECT360 retro-reflective material - Adjustable waistband and velcro cuff - Waterproof storm zip - Seam-sealed for extra waterproofing - Side pockets - Low profiled rear spray guard - Machine washable - Weight - 440g (size variable) - Fabric 100% Polyester with TPU waterproofing

The new Nightrider jacket from Proviz combines the much-loved and highly effective retro-reflective REFLECT360 material with a high-spec super visible, waterproof, and highly breathable fabric to offer a complete day/night combination for all-year cycling. Highly breathable (10,000 gm/24hr) material keeps you at your own optimal temperature, and excellent waterproofing (10,000mm) ensures you'll stay dry but any excess moisture will be able to easily escape. We have used the same material as our world-renowned REFLECT360 range. The material has been strategically positioned on the jacket to give the maximum amount of retro-reflection. Light from a vehicle's headlights is reflected back toward the driver to help you be seen more clearly at night and defy the darkness! - Micro-fleece-lined collar for added comfort and warmth - Quick-dry mesh lining for extra comfort - Utilizes Reflect360 retro-reflective material in key areas to maximize visibility - Machine washable fabric—100% Polyester with TPU waterproofing - Adjustable waistband and Velcro cuff - Waterproof storm zip - Seam-sealed for extra waterproofing

**Only compatible with SL Sprint Stem (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. FEATURES -Computer compatibility: Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty