Your SEO optimized title Skip to main content

Write a Review

$59.00 $129.00 54% Off
The Evo Carve Shorts is designed for days on the trail or in the bike park to the needs of all-mountain bikers and freeriders. It is made of recycled x-stretch fabric which increases comfort and flexibility. It features zipped pockets and comes in a leger fit and a over-knee cut. - Made of recycled PET fiber - 88% Polyester, 12% Elastane - 4-way stretch - internal waist adjuster - zip pockets (2)
$60.00 $95.90 37% Off
The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized
$60.00 $95.90 37% Off
The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ Kids Elbow Guard, iXS introduces product properties like exchangeable padding and next-generation, structurally improved AeroMesh. offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Youth sizing
$19.94 $35.90 44% Off
The Carve Gloves are designed for all-mountain bikers, freeriders, and racers. The ergonomic preformed slip-on gloves feature an abrasive synthetic palm and a stretch fabric top, enhancing fit and comfort. The captivity touch function enables the use of a touch screen and the reinforced finger tips increase safety and its lifespan. - Pre-formed Ergonomics - Slip-on Design - Stretch Top - Abrasive Synthetic Palm - Reinforced Finger Tips - Touch Screen Ready
$109.00 $259.00 58% Off
The Carve Kids Upper Body Protective jersey is designed for heavier terrain and competition. It features a certified Xmatter protective foam where heavy impacts must be absorbed such as back and shoulders. A NockOut absorbent padding protects chest and ribs. A tight fit, an ergonomic cut, and a high level of moisture wicking and breathability, provide the highest level of comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively. - Youth sizing
$109.00 $259.00 58% Off
The Carve upper protective jersey is designed for heavier terrain and competition. It features a certified Xmatter protective foam where heavy impacts must be absorbed such as back and shoulders. A NockOut absorbent padding protects chest and ribs. A tight fit, an ergonomic cut, and a high level of moisture wicking and breathability, provide the highest level of comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively.
$69.94 $179.00 61% Off
The Flow upper protective jersey is specifically designed for Enduro and Trail riding. It features a certified Xmatter protective foam to protect your spine and larger surface of your back. Two small and integrated stash pockets allow packing most important tools. A tight fit, an ergonomical cut and a high level of moisture wicking and breathability provide highest comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively. Key technologies - X-matter: Flexible Viscoelastic polymer absorbs forces upon impact without hindering range of motion. The open cell compound is engineered to withstand multiple impacts in the same region while retaining its shock absorbing properties. -FlexZip: Stretchable and flexible zipper allows garments to move with contours of the body without excess bunching. - Aeromesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking.
$49.00 $69.90 30% Off
The Flow X jersey is designed for days on the mountain bike trail. It is made of recycled, moisture wicking and fast drying x-stretch fabric, which provides comfort and breathability. It features a microfiber lens wipe, a chest pocket and comes in a regular and comfortable fit. - Made of recycled PET fiber - 95% Polyester, 5% Elasthane - Breathable - Moisture wicking - Chestpocket - Microfiber lens wipe - REACH: EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)
$49.94 $89.90 44% Off
The Flow XTG Shorts, inspired by your beloved board shorts. XTG stands for XC, Trail & Gravel, and so it is designed with both gravel and single track riding in mind. They fit perfectly over your favourite bib, fall above the knee, and come in a superlight recycled x-stretch fabric. Additional features include one zippered hand pocket, one zippered cargo pocket, and an elastic loop closure that allows for quick and easy fastening. These shorts are the best companion for your longer hauls, allowing you to pedal and grind in comfort for hours on end. - Made of recycled PET fiber - 86% Polyester, 14% Elastane - 4-way stretch - Elastic loop board short closure - Zippered pockets (2)
$49.94 $79.90 37% Off
The Hack Kids Lower Body Protective shorts protect at all important vital impact zones. Designed as underwear, the shorts are fitted tight and include an antibacterial, 3D, ergonomically-formed chamois. - NockOut absorbent padding - Antibacterial, vented, and ergonomically 3D formed chamois - Youth sizing
$39.94 $75.90 47% Off
The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)
$49.94 $89.90 44% Off
The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)
$49.00 $149.00 67% Off
All-Mountain and Trail helmet. The high-end in-mold construction and its large and integrated venting system provide highest safety level and best comfort. The 3-level visor adjustment accommodates goggles and preferred positioning, and its magnetic closure system provides easy handling. Trigger AM Fulfills European and US safety standards. - Double In-mold Shell Technology - External And Internal Ventilation Channels - Goggle Compatible Adjustable Visor - Precision Interlocking - Ergofit Ultra System For Horizontal And Vertical Adjustment - Magnetic Closure - En1078, CPSC, KC - +/- 350g Sizing - Small/Medium = 54 – 58cm - Medium/Large = 58 – 62cm
$159.00 $199.00 20% Off
One of the lightest (+/- 595g) all-mountain, trail and enduro full face helmets designed for all day comfort regardless of your riding discipline. The Trigger helmet provides all-round protection with patented inmould technology due to direct fusion of the helmet shell to the internal EPS material. Additionally, the Trigger FF is the only helmet on the market with the unique and patented technology of one complete and seamless EPS liner unit, with inclusion of the face guard structure. As a result, the rider benefits from increased structural strength, reduced weight & volume, and increased ventilation. The numerous ventilation openings have been strategically angled and positioned to offer superior air circulation and supply a continuous cooling system. Precision interlocking ErgoFit Ultra allows you to adjust the fitting ring both for verticle tilt and circumference-wise, guaranteeing a precise and comfortable fit for any head. With the 2-level visor adjustment capability, there is sufficient space to rest your google along the forehead yet below the visor. Lastly, the Fidlock magnetic buckle makes for a quick, efficient closure and release without compromising security. This helmet series fulfils the European safety standard, EN1078 as well as the American CPSC and AS for DH on frontal impact. - MIPS brain protection system - Patented all-in-one Inmould technology, external and internal ventilation channels - Adjustable, goggle compatible visor - Dial adjuster with precision interlocking - ErgoFit Ultra system for horizontal and vertical adjustment - Double-Inmould, 360° Inmould shell - Adjustable straps - Magnetic closure - +/- 595g (SM) - EN1078, CPSC, KC, AS - Sizes: XS = 49-54cm, SM = 54-58cm, ML = 58-62cm head circumference
$144.94 $259.00 44% Off
The Trigger upper protective jersey is designed for heavier terrain and competition. It features a certified Xmatter protective foam where heavy impacts must be absorbed such as back and shoulders and additionally with elbow protection. A NockOut absorbent padding protects chest and ribs. A tight fit, an ergonomic cut and a high level of moisture wicking and breathability provide highest comfort and safety. EN1621-2:2014 L1 (Back) / EN1621-1:2012 (Elbow) certified. - Xmatter Protective Foam At Back And Shoulder (removable) - Nockout Absorbent Padding At Chest And Rips - Lightweight, Compact, Moisture Wicking And Breathable - Flexzip, Stretchable YKK Zipper For Increased Ergonomic Comfort - Adult-sized
$29.99 $65.00 54% Off
The Flash I is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Double bushing spindle, 52.5mm - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
$49.00 $90.00 46% Off
- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams reduce friction on your skin - Odour prevention: treated with Polygiene Odor Crunch - Machine washable
$84.95 - $130.00 $130.00 Up to 35% Off
- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams prevent chafing - Odour prevention: treated with Polygiene Odor Crunch - Machine washable - Integrated CHAMOIS PAD
$72.00 - $84.89 $150.00 Up to 52% Off
The Handlebar Pack Boa L is a spacious, waterproof, and quick-to-fix handlebar cargo carrier equipped with the Boa Fit System. - Quick access from both sides - Adjustable capacity due to roll-top closure - Durable and waterproof - For road bike, gravel bike, and MTB - Boa Fit System for easy and secure fixation - 100% waterproof - Enough space for extra rain jacket, extra clothes, snacks, tools, and spare tube
$59.00 - $94.94 $120.00 Up to 51% Off
Offering optimized back ventilation, the Hip Pack 3L is perfect for bike rides with little equipment. Thanks to the Venti Flap system you can individually adjust the distance of the fannypack to your back and the ventilation along the back panel. With the Bladder 1.5L, you also have the perfect, small hydration pack. - Air Flow Contact System offers perfect back ventilation - Separate and quick-access tool compartment - 1.5L Hydration bladder included
$100.00 - $120.00 $120.00 Up to 17% Off
The HIP PACK CAPTURE 7L is EVOC's top-notch hip carry solution for sports photographers, offering compact, fast access to camera and perfect carrying comfort even in extreme sport scenarios. - Low-profile back system that fits more snugly to the back - AIRFLOW CONTACT SYSTEM for perfect back ventilation - Freely configurable camera compartment - The camera can be accessed easily and swiftly - Ergonomically optimized, adjustable hip belt system with quick access hip pockets - Usefully positioned compartments for small items - Carrying comfort assured through the easy adjustment of the gap between back and pack using the VENTI FLAP system - Integral rain cover and belt system for holding a tripod - The main padded camera compartment is protected by individually adjustable compartment dividers
$89.97 $135.00 33% Off
- AIRFLOW CONTACT SYSTEM offers perfect back ventilation - VENTIFLAP for uphill- and downhill mode adjustment - 2 BOTTLE CARRIERS with extra safety fixation—easy to reach - Includes 1.5L bladder and magnetic tube clip
$59.95 $65.00 8% Off
Cool bike jersey with outstanding DRIRELEASE moisture management and stylish cotton appeal. The T-SHIRT DRY MEN boasts a trendy look and hidden functionality.
$79.94 $200.00 60% Off
- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Structured silicone coating on inner seams prevents slippage - Machine washable
$22.94 - $28.00 $28.00 Up to 18% Off
The Seat Bag M is a lightweight storage option for road bike or MTB tube and repair kit. - Lightweight - Mesh pocket - Better visibility thanks to the reflective logo print - Fixation buckle - Seatpost strap for added stability - Easy & safe loop fixation
$22.15 - $40.00 $35.00 - $40.00 Up to 37% Off
The Seat Bag Tour M is a water-repellent seat bag for tubes and repair kits that offers all the familiar top quality and functionality that EVOC is known for in a compact, 0.7L format. - Very durable and water-repellent material - Water-repellent zipper - Hypalon reinforcement prevents tears from the seatpost's hardware and protects the seatpost's finish - Multipurpose compartment and additional mesh pockets - Integrated loop for tail lights - Easy & safe loop fixation
$79.94 - $109.95 $150.00 Up to 47% Off
EVOC's Seat Pack Boa makes for useful extra storage on your bike; and it doesn't affect your riding, even when it gets rugged! This is an on-bike storage option that offers all the familiar top quality and functionality that EVOC is known for. - Adjustable capacity due to roll-top closure - Dropper post compatible - Soft TPE seatpost protection - Flexible main compartment closure that adjusts to bag size - Boa Fit System for easy and secure fixation - 100% waterproof - Enough space for extra jersey, tools and spare tube
$58.94 - $110.00 $110.00 Up to 46% Off
EVOC's Seat Pack Boa makes for useful extra storage on your bike; and it doesn't affect your riding, even when it gets rugged! This is an on-bike storage option that offers all the familiar top quality and functionality that EVOC is known for. - Adjustable capacity due to roll-top closure - Dropper post compatible - Soft TPE seatpost protection - Flexible main compartment closure that adjusts to bag size - Boa Fit System for easy and secure fixation - 100% waterproof
$125.50 - $162.75 $170.00 - $190.00 Up to 27% Off
The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching. We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame. Features - Padded pickup tailgate protection - Ideal for shuttling bikes - particularly MTBs - Quick access to tailgate release handle - Fold-Away flap for rear camera (Olive/Black and Black/Olive only) Specifications - Weight: 1850 g (Size M/L), 2300 g (Size XL) - Material: P 600/D PU coated, Tarpaulin - Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm - Colors: Black/White, Black/Olive, Olive/Black Sizes Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.
$44.95 $54.95 18% Off
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"
$44.95 $55.00 18% Off
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"
$44.95 $55.00 18% Off
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"
$44.95 $55.00 18% Off
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"
$83.99 - $141.68 $83.99 - $141.68 Up to 21% Off
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks - Designed for GXP, DUB, and long-spindle BB30 cranks
$745.00 - $799.00 $897.00 Up to 17% Off
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty
$799.00 - $899.00 $1,002.00 Up to 20% Off
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty
$128.35 $151.00 15% Off
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
$945.00 - $979.00 $1,050.00 Up to 10% Off
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
$929.94 $996.00 7% Off
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
$999.00 $1,291.00 23% Off
Zipp's 303 Firecrest Tubeless rim brake wheels offer all-around performance for a new era of road riding. They're rich in heritage yet loaded with innovations; as adept in the mountains as on rolling hills, windswept farm lanes, or ferocious field sprints. At Zipp, we never rest on laurels. These wheels feature a 19mm internal width and are tubeless ready. That means you can run lower tire pressure for greater cornering grip and compliance while still benefiting from reduced rolling resistance and without the risk of pinch flats. When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. They're lightweight and feature ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level NSW wheel lineup. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance. The ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. Lastly, at the center of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hub, the German-engineered ZR1. - Tubeless for secure performance even when ridden at lower tire pressures - New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Versatile 45mm rim profile that's fast, stable, and versatile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps, quick release skewers
$610.00 $673.00 9% Off
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
$649.00 - $650.00 $727.00 11% Off
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
$1,599.00 $1,899.00 16% Off
Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty
$2,042.48 $2,321.00 12% Off
Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty
$929.00 $976.00 5% Off
- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty
$949.00 - $989.00 $1,029.00 Up to 8% Off
- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty
$1,625.00 - $2,099.94 $1,899.00 - $2,321.00 Up to 14% Off
Zipp’s 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset. This wheel delivers everything the performance cyclist demands. It’s aerodynamically efficient and stable in all wind conditions. What’s more, a wider rim is designed for tubeless tires at lower pressure for reduced rolling resistance and vibration damping, so you’ll lose as little energy as possible out on the road Cognition hubset rolls efficiently whether you are pedaling or coasting with Axial Clutch V2™ technology The 454 NSW Tubeless Disc brake is roughly a pound (more than 400 grams) lighter than its predecessor! TSE™ for greater efficiency and reduced rolling resistance Sawtooth™ rim with Hyperfoil™ nodes and HexFin™ ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 53/58mm rim depth Zipp graphics applied using Zipp’s ImPress™ direct-print technology XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Center locking rotor interface. Lockring is included with the wheels Campagnolo driver body sold separately Lifetime warranty Size: 700c Rim Construction: Carbon – Hookless Tire Compatibility: Tubeless tires only Rim Depth: 58mm Brake Compatibility: Center Lock Disc Front Axle/Spacing: 12x100mm Thru Axle Rear Axle/Spacing: 12x142mm Thru Axle Driver Body Type: choose; choose; Shimano HG-11 Road, Sram XDR Road Rim Inside Width: 23mm Rim Finish: UD fiber, Impress technology Rim Profile: Symmetrical Weight: 631g. (front): 727g. (rear)
$1,999.94 $2,321.00 14% Off
Zipp’s 454 NSW Tubeless Disc-brake is the ultimate road racing wheelset. This wheel delivers everything the performance cyclist demands. It’s aerodynamically efficient and stable in all wind conditions. What’s more, a wider rim is designed for tubeless tires at lower pressure for reduced rolling resistance and vibration damping, so you’ll lose as little energy as possible out on the road Cognition hubset rolls efficiently whether you are pedaling or coasting with Axial Clutch V2™ technology The 454 NSW Tubeless Disc brake is roughly a pound (more than 400 grams) lighter than its predecessor! TSE™ for greater efficiency and reduced rolling resistance Sawtooth™ rim with Hyperfoil™ nodes and HexFin™ ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 53/58mm rim depth Zipp graphics applied using Zipp’s ImPress™ direct-print technology XDR™ or SRAM/Shimano driver bodies Ships with 12mm front and rear end caps Center locking rotor interface. Lockring is included with the wheels Campagnolo driver body sold separately Lifetime warranty Size: 700c Rim Construction: Carbon – Hookless Tire Compatibility: Tubeless tires only Rim Depth: 58mm Brake Compatibility: Center Lock Disc Front Axle/Spacing: 12x100mm Thru Axle Rear Axle/Spacing: 12x142mm Thru Axle Driver Body Type: choose; choose; Shimano HG-11 Road, Sram XDR Road Rim Inside Width: 23mm Rim Finish: UD fiber, Impress technology Rim Profile: Symmetrical Weight: 631g. (front): 727g. (rear)
$16.00 $19.00 16% Off
Zipp 76/77 Front Hub Endcaps for QR x 100mm Axle
$999.94 - $2,300.00 $1,125.00 - $2,300.00 Up to 13% Off
808 FIRECREST TUBELESS DISC-BRAKE Zipp’s 808 Firecrest Tubeless Disc-wheelset is all about science to achieve speed. That’s the perfect approach for Zipp’s stiff deep-rim choice for triathlons, criteriums and road racing. At 80mm deep, its rim is designed to make you faster in every way. Zipp’s Total System Efficiency design approach, or TSE, infuses the 808 Firecrest with new features, including a huge drop in weight from its previous iteration, well more than 280 grams. Also, the wheel is designed with a hookless and tubeless rim profile and 23mm internal width. That’s ideal for running wider tires at lower pressure for reduced rolling resistance and greater cornering grip. In fact, TSE attacks the four primary barriers to speed: Wind Resistance, Gravity, Rolling Resistance, and Vibration Losses. Zipp’s legendary Firecrest rim shape provides high aero efficiency and crosswind stability. Also, Zipp’s ABLC Technology uses a complex dimpling pattern to improve aero efficiency. What’s more, while this wheelset is optimized for tubeless tires, you still have the option to run Tubeless or tubeless ready tires with tubes. The 808 Firecrest with TSE builds on this wheel’s legacy as a go-to wheel fastest or optimized for TT, tri and crit racing. This wheelset is fastest with a 28mm tire. Disc brakes also off er more reliable speed modulation and braking power in all weather conditions. What’s more, in triathlon, running wider tubeless tires at lower pressure makes you faster while also smoothing out the ride so your legs are fresher for the all-important run. Zipp’s German-engineered ZR1 DB Hubset provides quick engagement with robust durability, adding to the punchiness of the 808 Firecrest. Features · TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure · Minimum 25mm tire the 808 is optimized for a 28mm tire. · Almost 274g lighter than previous model · ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement · An all-out aero 80mm rim profile · ABLC dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel · Superior modulation and stopping power of disc brakes · Center locking rotor interface. Lockring is included · Built with Sapim™ CX Sprint J-bend spokes · Zipp graphics and cosmetic identity that scream speed · XDR or SRAM/Shimano™ driver bodies ? · Campagnolo® N3W Driver body sold separately · Ships with 12mm front and rear end caps · Lifetime warranty
$282.00 $298.00 5% Off
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
$49.94 $68.00 27% Off
Zipp Cognition Disc-Brake QR Rear End Cap Set for XDR Freehub Bodies
$89.00 - $216.00 $129.00 - $216.00 Up to 38% Off
Freehub bodies for Zipp Cognition hubs.
$12.00 - $20.00 $20.00 - $21.00 Up to 43% Off
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
$97.00 $108.00 10% Off
Wheel Freehub Kit—XDR Driver Body Kit—Zipp ZR1 Compatible With: WH-202-FTLD-A1, WH-303-F650-A1, WH-303-FTLD-A1, WH-303-FTLR-A1, WH-303-FTUD-A1, WH-303-FTUR-A1, WH-404-FTLD-A1, WH-404-FTLD-B1, WH-404-FTLR-A1, WH-808-FTLD-A1, WH-808-FTLR-A1, WH-SP9-TLD-A1, WH-SP9-TUD-A2, WH-SP9-TUR-A2
$59.00 $69.00 14% Off
The Zipp G40 XPLR is a wide (40mm) tire designed for control, which translates in the gravel world to higher overall speed. In developing this tire, Zipp began with a speed-carrying chevron center-tread pattern that transitions to an inverted soccer cleat design, then added XC-style knobs on the edges that offer the ability to dig in when you need it. And, amid all this, durability was crucial. The tire's casing and bead-to-bead puncture protection strip navigates the fine line between supple and stiff so that grip and performance do not suffer while making an incredibly durable gravel tire. The tire's 40mm width was carefully selected to be most effective with its tread pattern while also fulfilling riders' evolving preferences for wider tires during gravel events and off-pavement riding. It's just what you need for gnarly, all-day riding. It performs exceptionally well with Zipp's widest and most versatile 700c rim, the 303. - High-performance gravel and adventure tire - Aggressive cornering side knobs for excellent control - Fast-rolling center section - 30-65 psi - Tubeless Ready, tube compatible - Hookless compatible - ETRTO 40-622 (700x40c) - 120 TPI - Tan sidewall - Aramid bead-to-bead puncture protection that is very resistant to sidewall cuts - Hookless compatible - Weight: 480g
$1,799.94 - $4,400.00 $2,000.00 - $4,400.00 Up to 10% Off
Zipp’s ultimate aero weapon is faster than ever, thanks to our proprietary Total System Efficiency technology. With TSE, the 858 NSW Carbon Tubeless Disc-brake wheelset features a tubeless and hookless rim profile for seamless tire interface and huge drop in weight. The 858 gives you the benefits of our deep rims at weight typically associated with rims that are 20mm shallower. The wheel’s internal width is 23mm, ideal for running wider tires with lower pressures for decreased rolling resistance. That’s how TSE technology helps you conquer the four barriers to speed: Wind Resistance, Gravity, Rolling Resistance, and Vibration Losses. The 858 NSW’s undulating 82mm-85mm deep rim shape, our patented Sawtooth profile, is our highest performing design for aero efficiency and crosswind stability. The 858 NSW features Zipp’s Carbon Internal Reinforcement (CiR), which creates a rim that is 10% lighter and just as strong as previous wheels. The result is the pure speed, especially for triathletes, time trial specialist, and any other speed freak. What’s more, while this wheelset is optimized for tubeless tires, you still have the option to run tubeless ready tires with tubes. The 858 NSW is fastest with a 28mm tire. In triathlon, running wider tubeless tires at lower pressure makes you faster while also smoothing out the ride so your body is fresher for the run or another attack. Disc brakes also off er more reliable speed modulation and braking power in all weather conditions. At the center of the 858 NSW is the Cognition V2 Hubset engineered with the Axial Clutch V2 mechanism for quicker engagement and lower friction as well as improved durability. FEATURES · Zipp’s most advanced and fastest deep-rim wheel for road, triathlon, and time trialing · More than 243 grams lighter that previous model · Optimized tire bed for easy tire installation · TSE for greater efficiency and reduced rolling resistance · Sawtooth rim and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth · Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction · Ships with 12mm front and rear end caps · Center locking rotor interface. Lockring is included with the wheels · XDR or SRAM/Shimano™ driver bodies · Campagnolo® N3W Driver body sold separately · Zipp graphics applied using Zipp’s ImPress direct-print technology · Minimum 25mm tire width · 28mm tire is the optimum width for all riders · Lifetime Warranty
$239.00 - $285.00 $285.00 Up to 16% Off
- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm
$242.25 - $285.00 $285.00 Up to 15% Off
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately
Page 1 of 57 Next page