Write a Review

Replacement 9/10/Dynasys mountain freehub bodies for DT Swiss hubs. - Accepts Shimano/SRAM 8,9,10 Speed cassettes and Shimano Dynasys 11-Speed mountain cassettes - Compatible with DT star ratchet rear hubs - Standard Bearing: Fits 180, 240 and 350 hubs

- 45mm deep aerodynamic carbon disc brake wheelset - Wind Tunnel Optimized rim profile, aerodynamic aluminum hubs, and USB ceramic bearings for optimal performance in all conditions - 2-Way Fit tubeless-ready rims with 19mm internal width, optimized for use with wider tires - G3 spoke lacing front and rear for maximum power transfer and braking performance - Black-on-black Dark Label graphics - Only 1520g per pair

This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers-uninhibited by legacy technology-took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp's Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

- Wheel bearing kit front/rear - Bearing dimensions: 17 x 30 x 7mm - Material: steel - 2 pieces

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.

Wheel Freehub Kit SS 176/177 SRAM XDR - End Caps Not Included Compatible With: WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1

- Holds one wheel securely for transport (up to 700c with 35mm CX tire installed). - Connects to second Zipp Connect wheel bag to transform into a double wheel bag. - Sturdy water-resistant EVA construction. - Includes removable axle/QR pocket.

Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set

PRODUCT SPECS: - 36 hole count - 25mm wide - Pinned - 20", 24" - 330g, 415g

Original equipment freehub bodies to fit SRAM hubs and wheels.

Who knew we could make a thru axle disappear? The new Maxle Stealth offers a light, low profile alternative to Maxle Lite. - Hub OLD 20x110 - Length 158mm - Thread Length 10mm - Thread Pitch M20x1.50 - BoXXer C1 (2019+) - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench - Compatible with all 15mm forks

Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.

276mm Straight-Pull External for Roam 30 27.5 Wheels, 3-pack.

SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

Replacement freehub body for Sram 900 series hubs

Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs