Your SEO optimized title Skip to main content

Write a Review

$5.99 - $34.99 $5.99 - $34.99 Up to 7% Off
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
$14.00 $15.00 7% Off
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers
$19.20 $24.00 20% Off
FOX QR 15 Geared Cam and Hardware QR Thru-axles for Fox suspension forks.
$18.99 $18.99 - $19.99 Up to 5% Off
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
$19.99 $29.99 33% Off
Mid Bottom Bracket Sealed Bearings Crank Arm Spacers & Tube Spacer Included Weight: 6 oz Mid BB (only compatible with Mid BB Frames)
$18.89 $26.99 30% Off
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
$18.87 $26.95 30% Off
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
$15.00 $19.99 25% Off
"Life Behind Bars" T-Shirt Color: Black
$19.99 - $22.99 $22.99 Up to 13% Off
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing
$19.99 $22.99 13% Off
- Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing;Bright color provides added visibility - Gel Cork Tape has a thickness of 2.7mm
$15.94 $21.95 27% Off
Charge, Click, Go Click Power Free yourself from the hassle of batteries! This small but essential accessory makes you visible to traffic. Bright side beams throw off additional light, and the silicone mount fits almost any handlebar. A Micro-USB cable makes it easy—just charge, click and go! - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time
$16.42 $32.95 50% Off
Not too long ago, a 400 lumen headlight for this price would have been a pipe dream, but now the Blackburn DayBlazer 400 is a dream come true! Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g
$14.05 $21.95 36% Off
Two LEDs power Blackburn's super-bright Local 15 taillight. - Built to ANSI FL-1 light standard - 15 lumens - 3 modes: High: 15 lumens, Steady Flash: 15 lumens, Strobe: 15 lumens - Runtime: High: 48 hrs, Steady Flash: 95 hrs, strobe: 108 hrs - Silicone mount, 1 size fits all - Large translucent lens power button is easy to turn on/off while pedaling or wearing gloves - Replaceable AA batteries (Included)
$19.94 $32.95 39% Off
Local 50 Front Light - Two bright LEDs pump out 50 lumens - 3 beam modes let you adjust light intensity and battery runtime for your rides - Clear silicone side bezel amplifies visibility on all sides - Flexible silicone mount fits any handlebar diameter or shape - Tool free battery door allows for easy battery replacement - Built to the ANSI FL-1 standard, which provides consistent light performance measurement guidelines - 3 modes: High: 50 lumens, Low: 25 lumens, Strobe: 25 lumens - Runtime: High: 26 hrs, Low: 50 hrs, Strobe: 122 hrs - Plastic Injection body - 3xAA replaceable batteries Local 10 Rear Light - Large lens power button is easy to turn on/off while pedaling or wearing gloves - Silicone mount, one size fits all - Built to the ANSI FL-1 standard, which provides consistent light performance guidelines and measurements - FL-1 ANSI Standard - 10 lumens - 2 modes: High: 10 lumens, Steady Flash: 10 lumens - Runtime: High: 70 hrs, Steady Flash: 140 hrs - Replaceable AA batteries
$15.00 - $19.94 $19.99 Up to 25% Off
- Highly reflective colored spoke covers give your new bike that old school vibe - Perfect for cruisers, BMX, or wheelie bikes that need that little bit of extra style - Sold in bags of 36, enough for one wheel - 150mm long
$16.00 - $25.50 $19.00 - $30.00 Up to 16% Off
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$18.70 - $19.00 $22.00 Up to 15% Off
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$17.00 $18.00 6% Off
Hydraulic Disc Brake Compression Hose Nut, Qty 5 Hydraulic Hose Parts
$16.72 $19.00 12% Off
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
$15.84 $18.00 12% Off
Zipp’s Handlebar Gel Pad Set is a fast, easy way to minimize the countless bumps and vibrations from riding on less-than-perfect roads. This pack of two precision-shaped silicone gel contours to the tops of drop-style handlebars. Without tape on the bar, roll back your brake hoods and place the specially designed gel strips on the top of the bar from where the brake is attached to the handlebar. Simply rewrap your bar tape over the gel and enjoy the smooth ride.
$19.55 $23.00 15% Off
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$11.00 - $12.00 $12.00 Up to 8% Off
Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm
$12.32 $14.00 12% Off
Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.
$12.75 - $33.00 $15.00 - $33.00 Up to 15% Off
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
$19.99 $24.99 20% Off
Wave hello to happy hands. Nothing says comfort and control like the Evoke Mountain Bike Glove. This lightweight glove packs more features than you can count on one hand, including a comfortable unisex fit, breathable back-of-hand materials, a durable AX Suede Diez palm, strategically placed ventilation holes, and touchscreen-compatible fingertips for trailside calls. Details: - A lightweight, full-finger youth glove built with breathable materials and a durable suede palm. - Unpadded AX Suede Diez palm offers ultimate dexterity and handlebar control - Lightweight back-of-hand material - Strategically placed palm ventilation holes add breathability - Touchscreen-compatible material on thumb and index finger
$14.99 $25.99 42% Off
Words to live by After 45 years, we've finally cracked the key to happiness: Ride Bikes, Have Fun, Feel Good. The Trek Feel Good T-Shirt will have you feelin' good while you're havin' fun riding your bike. A bold graphic tee that outlines the priorities for every time you hop on your bike. - Super-soft polyester, cotton, and rayon blend fabric for all-day comfort - High-quality screen printed design - Unisex style everyone will enjoy - Semi-fitted for a just-right look that's not too baggy and not too tight
$15.99 $19.99 20% Off
A performance bike sock with a taller 5" length and soft compressive yarn made with recycled materials. Ready day or night Be ready sunrise to sunset with the Race Reflective Crew Cycling Sock. Built with a compressive leg opening and strategically placed ventilation, they offer simple and reliable compression and breathability so you stay fresh longer. Plus, you can feel good about your purchase knowing they are made with COOLMAX EcoMade yarns which are made with 100% recycled materials. - A performance bike sock with a taller 5" length and soft compressive yarn made with recycled materials. - Seamless toe design offers no-rub comfort at toe box - Single layer compressive leg opening provides simple and reliable compression - Compressive support around arch keeps feet feeling fresh for longer - Strategically-placed ventilation on top and bottom provides great breathability - COOLMAX EcoMade yarns keep you cool and dry while being made from 100% recycled material
$19.50 $25.00 22% Off
An absolute masterpiece, this cage screams style. The Fly Cage’s clean lines and clean laser logo really stand out. No cage outperforms the Fly Cage Poly—its LockTight Wings design grip your bottle securely while still keeping it easily accessible. - 100% Polycarbonate - LockTight Wings design - Laser-etched logo - Road and MTB approved - High-end and durable
$18.75 $25.00 25% Off
- 100% Tough Polycarbonate - 12mm Installation Adjustability - Embossed Pattern - Road/MTB/Gravel Approved - High-End & Durable - Available For Right & Left Sides
$18.75 $25.00 25% Off
- 100% Tough Polycarbonate - 12mm Installation Adjustability - Embossed Pattern - Road/MTB/Gravel Approved - High-End & Durable - Available For Right & Left Sides