Write a Review

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings

Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately

The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty

Zipp's Vuka Bull base bar is the perfect starting point for triathletes and time trial specialists building a high-tech aero cockpit. It's packed with innovations for fit, function, and speed. For aerodynamic efficiency, the carbon Vuka Bull utilizes the watt-saving wing-shape of Zipp's SL-70 Aero bar. Its design also is based on feedback from professional bike fitters, so athletes can maintain optimal aero position. The Vuka Bull is designed to be wide enough to help you control your bike in corners and climb comfortably but narrow enough to not slow you down when you are in the aerobars focusing on fast. The clamping area is wide enough to allow a wide range of armrest positions using the Zipp Vuka Clip. The Vuka Bull features a flip design that gives it a rise or drop, allowing you to have your hands where you need them. This available rise provides athletes with the option to keep the base bar as low as possible while still being able to raise the armrests and extensions where they need to be. Also, a slightly higher hand position can help athletes climb steeper grades. The Vuka Bull is designed with Zipp's Rapid Route technology, now with the ability to move control cables, hoses, and wires through the stem clamp area, making it compatible with modern integrated cockpit systems. - Wide enough for control—narrow enough to keep you aero - Designed to allow you to find your fastest position - Aerodynamic wing shape designed using the CFD-proven wing shape from the SL-70 Aero - Rapid Routing cable exits are positioned for easy installation of brake cables, now with routing through the stem clamp area - Updated Zipp cosmetics that scream speed: matte carbon with gloss black logo

Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks. - New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs - Sleek, low-profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 18.00 lbs. - Dimensions: L 56.00 in x W 9.50 in x H 4.50 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty

The KICKR CORE is the latest in Wahoo's line of smart indoor bike trainers. It delivers a realistic, accurate, and quiet indoor training experience by using the proven flywheel technology and advanced algorithms of Wahoo's legendary indoor bike trainers. The KICKR CORE indoor trainer is built with the durabilty to withstand all of your indoor training sessions and no other brand of smart trainers has more apps and software training options, including Zwift and Trainer Road. The Core also features built-in cadence measurement, without the need of an external sensor. PLEASE NOTE: Some assembly is required. The KICKR CORE does not include a cassette or wheel block. These items can be purchased separately. - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - The new KICKR features 12x142 and 12x148 thru axle compatibility in addition to standard 130/135mm quick release. Click to find out if your bike is compatible. - Enhanced power accuracy to provide accurate power measurement and generate up to 1800W. - Maximum percent grade adjusts to simulate up to a 16-degree incline. - Visual confirmation that KICKR CORE is powered, connected and transmitting via Bluetooth and/or ANT+. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR CORE to be controlled from any FE-C enabled device or application. - Robust steel construction ensures the KICKR CORE stays in place while you crank out the watts and stands up to years of heavy use. - When connected to your device, it automatically sets your resistance via your favorite app or software. - The KICKR flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and TrainerRoad. - Get these vital cycling metrics on your indoor ride. - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions. - With wind speeds topping out at over 30 mph the KICKR HEADWIND will keep you cool during your hardest efforts. - The Targeted Airflow Pattern of the KICKR HEADWIND is designed to mirror the shape and position of a cyclist's body while riding on a bicycle. - Control the speed of your KICKR HEADWIND by pairing your ANT+ speed sensor, heart rate monitor, or smart trainer directly to the fan. As your speed or heart rate increases so will the fan speed. - Pair to the Wahoo App via Bluetooth for easy fan speed control at your fingertips. - Control the KICKR HEADWIND with a simple press of a button. Four (4) preprogrammed fan speeds allow you to select your ideal airflow. - The KICKR HEADWIND was specially designed to fit with the KICKR DESK. The wheels on the KICKR HEADWIND allow you to roll the fan into position when it is attached to your KICKR DESK.

The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. - Designed for consistent power measurement of up to 1500W and accuracy of +/- 3% so that you can monitor and adjust your intensity. - Visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+ - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR to be controlled from any FE-C enabled device or application. - SNAP's wheel-on design makes it easy to turn your road, mountain, or TT bike into a powerful indoor smart trainer. - Made from high strength carbon steel and featuring a wide stance, SNAP is designed to keep its feet firmly planted on the floor and your bike securely locked in so you can train with confidence. - When connected to your device, it automatically sets your resistance via your favorite app or software - The SNAP flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and Trainer Road. - Get vital cycling metrics on your indoor ride. - Low operating sound, so no shouting required! - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs

TLD's Stage helmet: less weight, more fun! Since its debut, the Stage helmet has redefined mountain bike safety, style, comfort and ventilation. Stage is the lightest full-face helmet in its class, and combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets. A Polylite shell w/fiber reinforcement and Polyacrilite injected chin bar w/EXOskeleton adds strength without sacrificing weight. 11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions. The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package. - DUAL DENSITY EPS co-molded with EPP - MIPS brain protection system - EPP lined chinbar - 690 grams (1.5 lbs) size M/L - Meets Certification for CPSC 1203, CE EN1078, ASTM F1952, ASTM F2032, and AS/NZS 2063 *Varies by regional standards

FX 1 is a hybrid bike with a lightweight aluminum frame and quality parts that perform wherever you like to ride. It's perfect for anyone looking to get out more, ride as a family, do a bit of exercise, or commute to work on a versatile bike backed by a lifetime warranty. It's right for you if... - You want to get out and ride more, and you're looking for performance where it really counts: a lightweight frame, wide range of gearing, and strong wheels. You also want a great value and the confidence of Trek's lifetime warranty. The tech you get - A lightweight aluminum frame; 21 speeds so there's always a right gear for your terrain; strong, double-walled wheels with wide, stable tires; and mounts that make it easy to accessorize your ride with racks, fenders, lights, fitness trackers, a kickstand, and more! The final word - FX 1 is a versatile hybrid bike at a great value. It's built with a lightweight aluminum frame, performance parts that keep the price in check, and strong wheels built on double-walled rims. This hybrid is perfectly suited to a variety of uses, from casual riding to exercise and commutes. Why you'll love it - This bike brings families together, gets people away from screens, and lets you enjoy time outside - It's versatile and does whatever you want it to do, whether that's riding for fitness, commuting, or cruising to the farmer's market to pick up groceries - It's easy to accessorize with racks, a kickstand, fenders, lights, and more! - You can pair FX with your smartphone and send your ride data to your favorite fitness app when you add DuoTrap S - Like every Trek hybrid, it's backed by a lifetime warranty and supported by a wide network of retail partners

FX 1 Stagger is a hybrid bike with a classic step-through frame design that's easier to mount and dismount. It's perfect for anyone looking to get out more, ride as a family, do a bit of exercise, or commute to work on a versatile bike backed by a lifetime warranty. It's right for you if... - You want to get out and ride more, and you're looking for performance where it really counts: a lightweight frame, wide range of gearing, and strong wheels. You also want a great value, and the confidence of Trek's lifetime warranty. The tech you get - A lightweight aluminum frame with a geometry that's easier to mount and dismount; 21 speeds so there's always a right gear for your terrain, strong, double-walled wheels with wide, stable tires; and mounts that make it easy to accessorize your ride with racks, fenders, lights, fitness trackers, a kickstand, and more! The final word - FX 1 Stagger is a workhorse hybrid bike at a great value. It's built with a lightweight aluminum frame, performance parts that keep the price in check, and strong wheels built on double-walled rims. This hybrid is perfectly suited to a variety of uses, from casual riding to exercise and commutes. Why you'll love it - It's versatile and does whatever you want it to do, whether that's riding for fitness, commuting, or cruising to the farmer's market to pick up groceries - The step-through frame makes it easy to hop on and go, and hop off when your ride is over - It's easy to accessorize with racks, a kickstand, fenders, lights, and more! - You can pair FX with your smartphone and send your ride data to your favorite fitness app when you add DuoTrap S - Like every Trek hybrid, it's backed by a lifetime warranty and supported by a wide network of retail partners

The XPro 15 is the ultimate expression in pedal technology. Created for competitive cyclists and triathletes seeking a competitive edge, the XPro 15 features CeramicSpeed watt-saving bearings, a hollow titanium axle and a super light carbon body giving you a pedal that weighs 88 grams per pedal. ICLIC, with its pre-opened engagement system, makes it super easy to clip in. The low stack height and oversized pedal platform make pedaling more efficient and comfortable.

The classic child bike seat. Classic, safe and easy-to-use reclining child bike seat, taking your daily commutes and family bike adventures to the next level. With Thule RideAlong child bike seat, it’s easier than ever to bring the kids along for a bike ride. The seat’s quick-release bracket makes it super-easy and quick to install. The bracket is mounted with bolts from the front, where there’s free space to use a tool. Once the bracket is mounted, the seat clicks into position and is ready for use in seconds. The child bike seat also has a reclining function for extra comfort and on-the-go naps. Features: - Seat can be mounted/dismounted from bike in seconds with the universal quick-release bracket, fitting most bike frames (28-40mm diameter round frames and maximum 40 x 55 mm oval frames) - Integrated protection wings safeguard your child's hands when the bike is leaned against a wall - Your child rides safely with the adjustable 3-point harness - Smooth, comfortable ride for your child due to the DualBeam suspension system that absorbs road shock - Your child is quickly and easily secured with a childproof safety buckle with large buttons - Added visibility thanks to built-in reflector and safety light attachment point - Ensures a perfect fit as your child grows thanks to the single-hand adjustable footrests and foot straps - Detachable, water-repellent padding is machine washable and reversible, offering two color options. - Comfortable for on-the-go naps with five different reclining options (up to 20°), easily adjusted using only one hand

Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal. We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation. The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available. - Custom made Norglide bearing bushings and Trelleborg O-Rings and seals - Thomson saddle clamps and fasteners - Motul Oil for durability and precision quality. - The return speed is damped in the last 15mm of upward travel to be gentle on your seating area. - 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel. - Passes ISO 4210 fatigue and strength tests for seat posts.

The Covert Elite Dropper seatpost includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it’s fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available. Custom made Norglide bearing bushings and Trelleborg O-Rings and seals Thomson saddle clamps and fasteners Motul Oil for durability and precision quality The return speed is damped in the last 15mm of upward travel to be gentle on your seating area Infinitely adjustable throughout the travel Cable actuated, with included lever

The DC Fraser features our integrated bar and stem concept, which now also allows for the integration of cables on the front of the bike. It comes with an updated cable holder solution with push pin zip ties. The ultralight result is optimized here for DC or Down-Country riding with a range of stem lengths to suit every shape and size of rider. Our DC Frasers have a neutral stack height across the range of stem lengths. A variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera. - RANGE OF USE: MTB - MATERIAL: Carbon UD, Superlight Layup - UP SWEEP: 6° up - BACK SWEEP: 8° back - RISE: 8mm Mini Rise - ANGLE: 0° - CLAMP DIAMETER: iC (integrated Cockpit) - STEERER DIAMETER: 1 1/8" - LENGTH: 40mm, 50mm, 60mm, 70mm - WEIGHT: 290g FEATURES: - XC World Cup level integrated carbon bar & stem - One-piece construction - Textured grip/lever area - Integrated stem 0° - Flat T-Bar shape - Width: 760mm - Syncros Engineered Carbon Construction

Our one-piece cross country handlebar/stem combo is the ultimate in lightweight for the discerning XC rider. Based on our popular T-bar flat handlebar and a -8° stem in 3 different virtual extension options our carbon engineers have been able to make a considerable weight saving with the same performance. - XC World Cup level carbon bar - One piece construction. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -8° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm

The bar of choice of Nino Schurter and Lars Forster of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint ideal reach, drop, and sweep for Nino and Lars, allowing them to get a super-low and fast position matched perfectly to what they need to race at the highest level at the World Cup. This -40 degreee stem angle might not be for everyone but works for them. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.

The redesigned, reimagined Stages Dash L200. Built for Performance. Featuring a brilliant 2.7” full-color screen, cycling specific maps, and a full assortment of training features. Automatic profiles make Dash the easiest computer to use with every bike, and the Stages Cycling app makes it the easiest computer to customize. No matter where or how you ride, Dash allows you to simply hop on and go.

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

We get it, rain rides are often not enjoyable. But with the SL Rain Jacket, we're hoping to change that. With the latest technology in waterproofing, Polartec NeoShell, this jacket is extremely breathable and stretchy, all while being completely waterproof—making that wet ride just a little more pleasant. Top it off with our HyprViz color treatment that increases your visibility to motorists, and you're left with a great option for nasty days. - Three back pockets help to secure all your ride needs, right where you want them. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Fabric Content: 61% Nylon, 31% Polyester, 8% PU

Traction, control, confidence, and fun—the Riprock 20 Coaster is the perfect bike for your kid to start hitting the trails with. And with the simple coaster brake design, safety and fun aren't mutually exclusive anymore. - The A1 premium aluminum frame is lightweight and built to withstand the tough use by kids, while the geometry features an ultra-low standover that makes it easy for your little ones to fit on and grow with the bike. - Steel coaster brake is a reliable, easy to use brake perfect for safe stops and awesome skids. - 20x2.3" Rhythm Lite tires deliver tons of traction, comfort, stability, and fun over all types of terrain.

On a mission to make wet rides a little more enjoyable, we've developed the new Men's Trail-Series Rain Jacket. With the latest technology in waterproofing, Polartec Neoshell, this jacket is extremely breathable and stretchy, all while being completely waterproof. And with a relaxed fit, it's right at home on both the trail and around town. - An over-the-helmet hood with a rain visor and adjustable drawcord keeps your head protected from the elements. - Fabric Content: 90% Polyester, 10% Spandex - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Neoshell provides true dynamic breathability allowing air to pass through without heat pressure build-up, allowing it to breathe as soon as you need it. Matched with a full stretch membrane allowing for a full range of motion without compromise. - Relaxed Fit is loose and comfortable, and also provides plenty of room for layering underneath. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Woven Polartec Neoshell fabric is the industry standard in breathable waterproof fabric solutions.

Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.

Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.

The shoe that offers the best for everyone: whether racing or a casual ride, Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, the Sidi Genius 10 is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort -The Soft Instep Closure System is a wide, anatomically curved strap combined with a Soft, thermo-formed EVA pad that distributes pressure evenly over The Instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center The EVA pad over a high or low Instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is light weight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, SIDI cycling shoes include a user replaceable polyurethane heel pad -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

SOFT INSTEP CLOSURE SYSTEM The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. TECNO-3 SYSTEM SIDI’s TECHNO-3 SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECNO-3 SYSTEM is serviceable and replaceable. SIDI HEEL CUP Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. REPLACEABLE HEEL PAD For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. CARBON COMPOSITE 20 SOLE SOLE The CARBON COMPOSITE 20 SOLE is in nylon and injected carbon fiber. The nylon keeps the technical features unchanged over time. The result is a light and stiff sole. The central part of the sole is graduated, with millimetric scale, to facilitate the correct fixing of the cleats. Equipped with replaceable polyurethane heel.

SOFT INSTEP CLOSURE SYSTEM The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. TECNO-3 PUSH SYSTEM TECNO-3 PUSH SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI's famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. TECNO-3 PUSH can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SINGLE TECNO-3 PUSH The central mechanism, creates a perfect tension balance between the shoe's internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment. SIDI HEEL CUP Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. RUBBER TOE Upper part of the toe section is rubberized to resist and deflect impacts from stones or debris when cycling. It is made with anti-slip rubber. MTB SRS CARBON-GROUND SOLE The MTB SRS CARBON-GROUND SOLE raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON-GROUND Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole, plus the innovative Replaceable MTB Plate, designed to prevent sole damage from pedal contact MTB SRS CARBON-GROUND SOLE Most Dual-Retention Bar type MTB Pedals (such as Crankbrothers and LOOK) recommend using a reinforcement plate between the cleat and the shoe in order to prevent cracking or denting the sole. The MTB Plate can be replaced in case of damage from the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS treads and MTB Plate are easily removable and replaceable. The MTB SRS CARBON-GROUND Sole is toe-spike compatible.

A brand-new road bike shoe in the Sidi lineup, the Shot-2 is light, aerodynamic, breathable, and well-performing. The upper is Microfiber TechPro and mesh. The Microfiber TechPro is eco-friendly with antibacterial and hydro treatment. Hydro treatment reduces water absorption. While the mesh provides great breathability and creates the ideal microclimate inside the shoe. A Comfort Fit Insole is provided for lightweight support. The new "C-Boost SRS" sole is born from the union of C, which indicates the chemical element Carbon, BOOST translation of push/support/support, and SRS Sole Replacement System. The C-Boost SRS sole provides excellent performance in the pushing phase. The special conformation of the metatarsal area allows greater power transmission on the pedals and guarantees ideal support. New oval holes, with an extra ± 5mm adjustment, considerably expand the positioning possibilities of the cleat which can be memorized by means of the usual millimeter scale applied. The carbon parts most subject to deterioration are protected by special SRS (Sole Replacement System) inserts in nylon and Thermoplastic Polyurethane (TPU) equipped with steel screws whose task is to reduce deterioration and at the same time extend the life of the resistance to abrasion while walking. The inserts are also integrated with ventilation holes that promote breathability inside the sole. The new "Double Tecno-3 Push Flex" rotor, entirely made by Sidi's R&D department (research and development center) together with the precious collaboration with sponsored athletes, completely eliminates the pressure zone on the instep and significantly improves the closure feeling. This system requires a smaller support surface on the tongue of the shoe and is equipped with a central flexing system capable of adapting to the different needs and conformations of the cyclist's feet, without creating areas of overpressure. Like its predecessors, it guarantees micrometric regulation, closing speed/tension release, and is replaceable. The all-new integrated heel is light and reinforced to avoid deformation after prolonged efforts and pressure. Thanks to its anatomically shaped structure, it stabilizes and supports the foot while pedaling, while the Reflex inserts offer greater safety on the road, with poor visibility conditions. As in the previous model, the Adjustable Heel Retention Device reinforces the spoiler, significantly improving the fit. Enjoy great traditional Sidi quality and construction.

The iconic design that gave birth to our first cycling shoes over 60 years ago meets modern materials to create our lightest racing shoes. Designed to retain all support and strength, the Sidi Sixty offers the ultimate fit in a pair of racing shoes for cycling. -The Sidi Tecno-4 Push System has a single rotor to reduce the shoe's weight and guarantees the precision of a micro-metric closure -The Adjustable Heel Retention device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -The Vent Carbon Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area -The Vent Carbon Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale for easy cleat alignment and replacement -The key benefits of the Vent Carbon Sole are not only superior power transfer because of its light weight and stiffness, but also warm weather comfort -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

To mark the 60th anniversary of Sidi we created a special shoe, the Sixty. The Sixty brings a fresh take on style and performance in a lightweight chassis—all with Sidi's world class, handmade construction and Italian durability. The evolution of Sidi technology applied to rotors, the Tecno 4 System, features a single rotor to reduce the shoe's weight and guarantees a micrometric and precise closure. A highlight is the release speed of the tension, definitely improved compared to the other Sidi mechanisms. Another technology belonging to the Italian brand, Sidi, is the possibility to replace all the Tecno-4 components. The high-security Velcro straps incorporate integrated, locking polymer teeth that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmovable. The newly designed, lightweight heel is reinforced to avoid deformations after prolonged efforts and pressures. Anatomically shaped, it stabilizes and supports the foot while pedaling. The Reflex inserts on the heel provide greater safety to athletes on the road, helping to signal the presence of the cyclist in conditions of poor visibility. The Vent Carbon Sole is produced with carbon fiber in a weave pattern that allows more rigidity, lightness, and increased power transfer. It is equipped with integrated vent and air flows for ventilation and heat dissipation. The integrated vent can be opened or remain closed (by using a screwdriver) for 4-season comfort. The central part of the sole is graduated for easy cleat alignment and replacement. The soles are equipped with replaceable/walkable polyurethane heel pads. - Sidi's lightest cycling shoe. - Microfiber TechPro upper is vented and streamlined for aesthetics and weight savings.

To mark the 60th anniversary of Sidi we created a special shoe, the Sixty. The Sixty brings a fresh take on style and performance in a lightweight chassis—all with Sidi's world class, handmade construction and Italian durability. The evolution of Sidi technology applied to rotors, the Tecno 4 System, features a single rotor to reduce the shoe's weight and guarantees a micrometric and precise closure. A highlight is the release speed of the tension, definitely improved compared to the other Sidi mechanisms. Another technology belonging to the Italian brand, Sidi, is the possibility to replace all the Tecno-4 components. The high-security Velcro straps incorporate integrated, locking polymer teeth that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmovable. The newly designed, lightweight heel is reinforced to avoid deformations after prolonged efforts and pressures. Anatomically shaped, it stabilizes and supports the foot while pedaling. The Reflex inserts on the heel provide greater safety to athletes on the road, helping to signal the presence of the cyclist in conditions of poor visibility. The Vent Carbon Sole is produced with carbon fiber in a weave pattern that allows more rigidity, lightness, and increased power transfer. It is equipped with integrated vent and air flows for ventilation and heat dissipation. The integrated vent can be opened or remain closed (by using a screwdriver) for 4-season comfort. The central part of the sole is graduated for easy cleat alignment and replacement. The soles are equipped with replaceable/walkable polyurethane heel pads. - Sidi's lightest cycling shoe. - Microfiber TechPro upper is vented and streamlined for aesthetics and weight savings.

Upper: - Microfibre techpro Sole: - Vent carbon sole Tecnology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad Last: - Women’s specific

The Sidi Zero Gore 2 will keep your feet dry and warm on the coldest days thanks to the Gore-Tex lining that is totally waterproof. -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The proprietary Sidi Wire material is completely non-binding for intuitive and effortless on- the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi Heel Cup stabilizes and supports the heel, reduces heel slip and provides increased power transfer -The redesigned Millenieum 5 Sole is constructed from injected carbon fiber in a nylon matrix. This infusion of carbon fiber in the nylon increases sole stiffness and durability, ensuring optimum performance in the face of prolonged use and temperature changes -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

Worry-free Di2 shifting in a compact shifter size The new SHIMANO 105 shift/brake lever features Di2 electronic shifting for the first time, bringing precise, intuitive gear changes to even more riders. Reach adjustment and customized button functions allow you to dial in your ideal ergonomics. FEATURES Clean cockpit: Wireless connection enhances the aesthetic of your bike while keeping shifting lightning fast - Longer lasting. Uses two CR1632 batteries (battery life: 3.5 to 4 years) Compact, ergonomic performance cascaded from DURA-ACE - Raised hood peak improves ergonomics, while a longer hood body increases hand support Make DURA-ACE yours with custom button function and adjustable ergonomics - Easily change button function with the E-TUBE app - Find your optimum lever position with simple reach adjust

Worry-free Di2 shifting in a compact shifter size The new SHIMANO 105 shift/brake lever features Di2 electronic shifting for the first time, bringing precise, intuitive gear changes to even more riders. Reach adjustment and customized button functions allow you to dial in your ideal ergonomics. FEATURES Clean cockpit: Wireless connection enhances the aesthetic of your bike while keeping shifting lightning fast - Longer lasting. Uses two CR1632 batteries (battery life: 3.5 to 4 years) Compact, ergonomic performance cascaded from DURA-ACE - Raised hood peak improves ergonomics, while a longer hood body increases hand support Make DURA-ACE yours with custom button function and adjustable ergonomics - Easily change button function with the E-TUBE app - Find your optimum lever position with simple reach adjust

The uninterrupted shifting experience of the Shimano Dura-Ace R9200 12-speed cassette range lets you climb, sprint, and push your limits without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range. - Faster, seamless shifts under maximum pedaling load - Refined 12 step gear combination provides peak efficiency and accelerating performance for every situation - Compatible with 12-speed and road 11-speed freehub body

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting. - Fast Di2 shifting performance - Smaller, sleeker, lighter - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-55t - 61-66 degree chainstay angle - Includes 1 SD300 port

Shimano Dura-Ace ST-R9250 dual control levers are the ultimate in reliable performance thanks to a wired connection to the rim brakes. Refined ergonomics and advanced materials show the race pedigree of these levers. - Quick and intuitive 12-speed Di2 shifting - Clearly defined click feeling with ergonomic shifting lever - Better bike control and confidence in race conditions - Hood shape and texture optimize grip and brake power transmission

Featuring Servo Wave Action brake technology, the Shimano Dura-Ace ST-R9270 brake lever delivers modulation and control like never before. Wireless shifting keeps your bike looking clean while offering the fastest, most precise gear changes available. All of this resides in a dual control lever that employs the most advanced materials to offer lightweight and refined ergonomics that provide comfort and control for the most demanding conditions. - The wireless connection provides a clean cockpit, enhancing the aesthetic of your bike while keeping shifting lightning fast - 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries - Unparalleled ergonomics engineering refined with pro rider feedback - Raised hood peak improves ergonomics, while a longer hood body increases hand support - Compatible with satellite shifters - Servo-Wave technology optimizes brake control - Lighter, smoother lever action - Enhanced modulation thanks to an expanded braking control area - Carbon fiber brake lever and titanium hardware

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

S-PHYRE track racing shoes. Microfiber Synthetic Leather Lighter, stronger and more durable than natural leathers External Heel Cup External curved heel cup suppresses foot twist and roll Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Hollow-Channel Lightweight, ultra-rigid hollow outsole Wider Cleat Adjustment Expands range for mounting cleats - Reinforced upper and closure minimizes foot movement and provides greater control of power transmission - Stretch-resistant microfiber synthetic leather upper - Low-profile Boa L6 dial with power boost wire guide - Tailored to sprinters, T.T., and Criterium specialists

Bringing a pop of color and style to the peloton, the Limited Edition RC902S Champagne colored shoes are supremely engineered for your fastest efforts. With its ultra sleek lines, optimal power transfer, and refined pro-grade features, the RC903S is the culmination of our most advanced technologies for a performance elevating race shoe that feels and functions unlike anything you’ve worn before. • Special Edition Champagne colorway of the flagship RC903 shoe • Premium Road Cycling Shoe: S-PHYRE RC903S is a high performance road racing shoe compatible with SPD-SL cleats • Precise Fit: dual low-profile BOA® Li2 metal dials deliver quick and precise micro-adjustments • Optimum Stiffness: reduces energy loss and maximizes power transfer • Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration • Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits • Cleats sold separately

Uncompromising Cross Country MTB and Cyclocross racing shoe with the lightest ever structure. Lightweight SHIMANO ULTREAD XC rubber outsole with highly technical tread pattern creates the ultimate racing grip. Rider-tunable talon-shaped metal spikes allow riders to choose ultra-lightweight performance or ultimate traction. Dual low-profile BOA® Li2 dials allow quick and precise micro-adjustment. Surround wraping upper with function-specific zones and scientifically optimized materials maximize fit and pedaling performance. Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency. Adjustable powerzone lace guide securely holds forefoot.

Uncompromising Cross Country MTB and Cyclocross racing shoe with the lightest ever structure. Lightweight SHIMANO ULTREAD XC rubber outsole with highly technical tread pattern creates the ultimate racing grip. Rider-tunable talon-shaped metal spikes allow riders to choose ultra-lightweight performance or ultimate traction. Dual low-profile BOA® Li2 dials allow quick and precise micro-adjustment. Surround wraping upper with function-specific zones and scientifically optimized materials maximize fit and pedaling performance. Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency. Adjustable powerzone lace guide securely holds forefoot.

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams

Shimano Ultegra ST-R8150 levers combine the accuracy of Shimano 12-speed Di2 shifting with the light weight of rim brakes. - Quick and intuitive shifting - Clearly defined click feeling with ergonomic shifting lever - Better bike control and confidence in race conditions - Hood shape and texture optimize grip and brake power transmission

Shimano's Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. Your time on the bike is precious, let Shimano make it even better. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Unparalleled ergonomics engineering refined with feedback from professional riders - Raised hood peak improves ergonomics - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection - High electronic energy efficiency, with 1.5 to 2 years of battery life from CR1632 shifter batteries - Can be used with additional satellite shifters

SPOKE FINISH: Black WHEEL SIZE: 29" RIM MATERIAL: Aluminum FREEHUB BODY MATERIAL -,Steel NUMBER OF SPOKES: ,24,24/24 SPEEDS: 11 Speed DISC MOUNT: Center Lock Disc NIPPLE MATERIAL: Aluminum TIRE TYPE: Tubeless SPOKE MATERIAL: Stainless Steel BRAKE TYPE: Center Lock Disc O L D: 110,110/148 RECOMMENDED TIRE SIZE: 29 x 2.00 - 2.40

SPOKE FINISH: Black WHEEL SIZE: 29" RIM MATERIAL: Aluminum AXLE FIXING METHOD: 12mm E-Thru,15mm E-Thru,F15mm/R12mm NUMBER OF SPOKES: 24,24/24 SPEEDS: 12 Speed, RIM WIDTH: 25mm DISC MOUNT: Center Lock Disc TIRE TYPE: Tubeless RIM HEIGHT 21 SPOKE MATERIAL: Stainless steel BRAKE TYPE: Center Lock Disc O L D: 148,110,110/148

The ability to run lower pressures and the increased flat prevention can't go unnoticed. While it's been a little bit slower to catch on with the road set, more road tubeless tires are currently available, and the technology, materials, and reliability have vastly improved. Shimano has been on the forefront of road tubeless know-how from the get-go and the Japanese bicycle component manufacture has been delivering tubeless road wheel options for over a decade. The durable Ultegra-level WH-RS500 wheelset adds to Shimano's current lineup and brings road tubeless to the masses is weighing in at just 1649 grams and built for rim brake use. First, a note on naming conventions. Though it's now got a serial model number, RS500, this wheelset is an updated version of the Ultegra hoops that Shimano partisans have been training on for years. They're lightweight, reliable, and tubeless-ready, making them an obvious choice for those spring base miles in questionable conditions. And speaking of questionable conditions, the machined brake tracks promise superior braking to carbon race hoops in all weather conditions. The 24mm deep rim profile ensures quick acceleration through low inertial mass and a comfortable, more compliant ride. - Rim Material: aluminum - Wheel Size: 700c - Tire Type: clincher, tubeless - Rim Depth: 24mm - Rim Width: [internal] 15mm, [external] 20.8

A new level of SHIMANO carbon wheel Shimano has brought full carbon wheels to a new level. With a development concept shared with DURA-ACE and ULTEGRA, the new full carbon wheels offer balanced performance at a lower price. The C32, with its focus on acceleration and climbing, shares DNA with the C36 DURA-ACE and ULTEGRA wheel options. FEATURES Simple design that can be easily matched to any bike Most affordable SHIMANO carbon road wheel 32 mm height full carbon rim Internal rim width: 21 mm Road 11 & 12-speed compatible SPECIFICATIONS: WHEEL SIZE: 700c AXLE FIXING METHOD: 12mm E-Thru NUMBER OF SPOKES: 24 SPEEDS:11/12 RIM WIDTH 21 DISC MOUNT: Center Lock Disc TIRE TYPE: Tubeless SPOKE MATERIAL: Stainless Steel BRAKE TYPE: Center Lock Disc O L D: 142,100,100/142 RECOMMENDED TIRE SIZE: 25-32c

A new level of SHIMANO carbon wheel Shimano has brought full carbon wheels to a new level. With a development concept shared with DURA-ACE and ULTEGRA, the new full carbon wheels offer balanced performance at a lower price. The C46, with its focus on a great all-rounder model, shares DNA with the C50 DURA-ACE and ULTEGRA wheel options. FEATURES: Simple design that can be easily matched to any bike Most affordable SHIMANO carbon road wheel 46 mm height full carbon rim Internal rim width: 21 mm Road 11 & 12-speed compatible SPECIFICATIONS: WHEEL SIZE: 700c NUMBER OF SPOKES: 24 SPEEDS: 11/12 RIM WIDTH 21 DISC MOUNT: Center Lock Disc TIRE TYPE: Tubeless SPOKE MATERIAL: Stainless Steel BRAKE TYPE: Center Lock Disc O L D: 142,100,100/142 RECOMMENDED TIRE SIZE: 25-32c

- Wheel: WH-RS770-C30-TL-F12 - Front: 24h - Old:100mm - Clincher(Tubeless Compatible) - Black, W/rim Tape - High drive rigidity - Size: 700c - OPTBAL - Lightweight & durable - Carbon laminate rim - Hub Compatibility 12mm thru axle ( Not Included ) - Higher rigidity - SHIMANO road E-THRU Axle - Centerlock mount - Rotor Compatibility 140mm/160mm ( Not Included )