Bicycle Components

Lean and clean. The lightweight and stiff S-Works Tarmac Stem features integrated cable routing for Tarmac SL7 models to clean up the cockpit without complicating the bike build. Compatible with Tarmac SL7 integrated cockpit. 80-140mm length options. 6 and 12 degree rise options. Approx. weight: 155g (100mm) Compatible with other road bikes using a 1 1/8 steerer tube (Note: cable integration will not be possible as with a Tarmac SL7)

Crank Arm Nut for 14mm Crank Arm Fixing Bolt

- Brake pads for Tektro HDC 300 hydraulic disc and Novella mechanical disc brakes - Tektro HDC 300 and Novella disc brakes came on a wide variety of Trek bikes

Replacement saddle ears for use with Bontrager saddles

Zoom Quick Comfort 6061-T6 Stems are adjustable from 80-150 degrees. - 6061-T6 stem - Adjustable-angle - 85mm range from minimum insertion to max insertion; 125mm from minimum insertion to top of quill - Material: Aluminum - Color: Silver - S.H.I.S. Stem Clamp Diameter: 22.2-24tpi Quill - Length: 90 - Bar Clamp Diameter (mm): 25.4 - Defined Color: Black - Stem Angle (deg): 80-150

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

RaceFace Crank Arm Fixing Bolts - M15

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Hope Brake Lever Parts

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Dia-Compe Star Nut for 1 1/8" Steerer (28.6mm)

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

- Sunlite Cottered Pins

- Chrome - Sold individually

- Routes cables underneath the bottom bracket - Will not rust or corrode

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- Crank dust cap - Works with most three-piece crank models

Seatpost heads, upper and lower rail clamps, bolts and washers for LEV-series posts - Steel - ETENi - ETEN

- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only

- Rubber - Color: Black

Bar end plugs (2)

- Steel cable noodle with alloy end caps - Includes plastic liner

• Compatible with most side pull and center pull brakes • All weather compound

- MTB or Road - 1.5 x 1855mm - Galvanized

Shifting cables for Road/Mountain bikes.

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters