Rollers

DT Swiss X 1900 Spline 25 Rear Wheel - 29", 12 x 148mm, Center-Lock, HG 11 MTN, Black Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. - Tubeless ready, 25mm wide and light rim -Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape - Spline Hub with Ratchet LN 18T freehub drive system Specifications: Hub/Brake Compatibility: Center-Lock Disc Color: Black Wheel Size: 29" Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain ISO Diameter: 622 / road / 29" Valve: Presta Rim Width (Internal): 25 Defined Color: Black Tire Type: Tubeless Ready Clincher Rear Axle: 12mm Thru x 148mm

DT Swiss X 1900 Spline 25 Rear Wheel - 29", 12 x 148mm, Center-Lock, Micro Spline, Black Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. - Tubeless ready, 25mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape - Spline Hub with Ratchet LN 18T freehub drive system Specifications: Hub/Brake Compatibility: Center-Lock Disc Color: Black Wheel Size: 29" Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain ISO Diameter: 622 / road / 29" Valve: Presta Rim Width (Internal): 25 Defined Color: Black Tire Type: Tubeless Ready Clincher Rear Axle: 12mm Thru x 148mm

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. 135mm x 12mm thru axle end cap kit for DT 240, 350 and 440 hubs with XD Driver for SRAM 11-speed cassette

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps - Also used for 12 x 157mm, 12 x 177mm and 12 x 197mm spacing - End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps - fits 180, 240, 350, 440

- Sold in Pairs - Designed With Team Input - 10 Square Molded Pins - Horizontal Concave for Grip - Nylon Plastic Body for Extra Life - 2 Unsealed Bearings - Heat Treated CRMO Spindle - 9/16" Size Only (Fits Three-Piece Cranks) - Weight: 14.5 oz (pair).

- Shaped and manufactured by PS Stix for Disorder Skateboards. - Heat transfer "JAH" graphic. - Teal, purple or pink top veneer, Nyjah's favorite board colors. Chosen at random for customers. - The 8.0' and 8.125” are Nyjah's exclusive mold never before available to the public. Nyjah skates the 8.125"

ENVE Composites Compression Plug, 1 1/8" . Carbon top cap.

Replacement parts for Enve hubs.

The SES 2.3 is purpose-built for going up. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Front and rear optimzed depths and shapes (27mm front, 32mm rear) - 21mm internal width is optimized for ENVE 27mm tires - Hookless tubeless rim is compatible with 25mm-32mm tires

The ENVE Combo Computer Mount integrates seamlessly with your ENVE Road Stem and opens up the possibility to accessorize your ride with a computer, light, and/or camera combo. - Compatible with all available K-Edge accessory mount inserts - Multiple light and camera mounting options COMPATIBILITY : Wahoo Garmin Models: 1030, 1000, 820, 520, 510, 500, 25, 20

In collaboration with K-Edge, this combination computer/accessory mount is designed for use with ENVE Aero Road Stems and features up to 25 degrees of adjustability to ensure that the computer’s position is exactly where the rider wants it. The US-made K-Edge computer mount includes inserts for Garmin and Wahoo cycling computers and is designed for exclusive use with ENVE Aero road stems, including stems provided with the Melee. In addition, the included accessory mount allows riders to add a camera or light to the front end of the bike if desired. Also includes mounting hardware bolt to attach this to your ENVE stem. WEIGHTS Computer Mount Only 35g Computer Mount with Combo Bottom Mount 50g COMPATIBILITY Stem ENVE Aero Stems Computers All Garmin Cycling Computer Models All Wahoo Cycling Computer Models Mount Insters Included (Co-Polymer Insert) 1 Garmin, 1 Wahoo Combo Bottom Mount Included Max Payload Bottom Mount 163g OTHER Range of Adjustment 25 Total Degrees (-5 to +20 Degree Angle) Mounting Bolt Torque Spec 5 Nm Color Anodized Black Material Aluminum

Shelter protects from impacts – spreading their energy within its structure , is abrasion and solvent resistant, doesn’t yellow and has a semi-structural adhesion to the surface it’s applied onto: normal bicycle washing won’t affect it, but it can be removed – if needed – without damaging the underlying paint.. Sheet with pre-cut elements, to easily protect sensitive frame areas (chainstays, down tube, cable/frame contact points.

Simply elegant. Casually cool. As a beach cruiser should be. You can feel the Electra difference with our patented Flat Foot Technology®, adding a whole new level of comfort and control. With a range of 7 gears and linear pull brakes, the Cruiser 7D is ready to roll. Size , Rider Height: 26" wheel, 160 - 180 cm, 5'3" - 5'11" 26 Tall, 168 - 188 cm, 5'6" - 6'2"

Size: IG 7-speed FT/RR: Rear Diameter: 26" Type: Clincher Cassette Compatibility: IG 7-speed Hub Width: 170mm Holes: 36 Butting: 14 Cross Section: Round Brake Type: 6-bolt disc Attachment: Bolt-on Nipple Locking Type: Not applicable Valve: Schrader Rim Material: Aluminum

- Fully seam-sealed compact 2.5- layer waterproof, breathable fabric - Emblazoned with high visibility 360 degree reflective safety chevrons - Luminite LED light unit integrated into the rear pocket for additional security 3 flash phase options - Zipped chest and handwarmer pockets - Rear zipper pocket with storm flap - Adjustable neck and hem cords concealed in front pockets - Bonded and laser cut double storm flap on centre zip - Cosy-touch lining in handwarmer pockets and inner collar - Reflective Velcro® cuff adjusters

2021 Service Kit 40 Drop Upper Crown 14mm OS 48 Rake

Absolute lightest in XC, made for marathon. At under 1300g, the 32 Step-Cast is the lightest MTB fork and made for marathon racing. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor. Available in 100mm travel only GRIP SL Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience a supple stroke in the early stages of the travel with an optimized pedal-to-bump efficiency as well as a smooth blowoff force in lockout mode to reduce rider fatigue Rear Arch Matrix - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty. With 100mm of travel in the 32 Step-Cast, the rear arch has all the necessary clearance for XC frames Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter Redesigned Crown - A new 7000 Series aluminum, zero-offset crown supports angled upper tubes, rather than relying on extra material to achieve rake overall rake. The crown not only contributes to the 32 Step-Cast’s stiffness, but when combined with our ultra-light steerer tube, saves approximately 20g over the previous model - Grip SL - 44mm Rake - 3Pos-Adj - Kabolt SL 110 1.5T - 100mm Travel

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP Damper - The GRIP damper tune is updated with pressure balancing to maximize damping performance while utilizing the spring-backed internal floating piston of Fox's more advanced GRIP dampers. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Lower Leg Channels - Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel, resulting in better fork performance by increasing small bump sensitivity and responsiveness - Grip - 44mm Rake - 3Pos - 15QRx110 1.5T - 120mm Travel

Designed for trail riding, the Factory Series 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth and ultra-durable Genuine Kashima Coat. These products are World Cup proven. Updated FIT4 With a new 8mm damper shaft and an average weight savings of 35 grams, the updated FIT4 damper provides more sensitivity while maintaining support during aggressive riding. Modifications to tuning and design provide a more usable range of adjustment. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP SL Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter - Grip SL - 44m Rake - 3Pos-Adj - Kabolt SL 100 1.5T - 120mm Travel

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP SL Remote Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience optimized pedal-to-bump efficiency with the convenience of handlebar-mounted remote switch to activate firm mode Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter - Grip SL - 44m Rake - 3Pos-Adj - Kabolt SL 100 1.5T - 120mm Travel

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Kabolt X Axle - A lightweight bolt-on floating axle, the Kabolt X shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design. Chassis alignment reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding - Grip X2 - 44mm Rake - Kabolt X 110 - 1.5T 58HT - 170mm Travel

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Kabolt X Axle - A lightweight bolt-on floating axle, the Kabolt X shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design. Chassis alignment reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding

Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. With the new X2 damper the Fox 40 is the downhill racer's edge New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 40 while maximizes strength and steering stiffness for downhill performance while adding no unnecessary weight Floating Axles - The 40’s floating thru axle allows perfect chassis alignment and reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel - Grip SL - 44mm Rake - 3Pos-Adj - Kabolt SL 110 1.5T - 120mm Travel

Rebuild kits for Fox Float suspension. Includes parts needed for rebuild

The Fabric Line S Elite features a shorter nose, broader rear section, and large cut-out with Standard Cro-Mo rails. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient.

Representing the next evolution of Feedback's flagship repair stand, the new Pro Mechanic builds on the longstanding reputation of its predecessor, the Pro Elite. With upgraded clamp jaws, clutch components, and mast hardware, the Pro Mechanic is more durable, more stable, easier to use, and even more reliable. The updated front spinner knob on Feedback's patented Speed Ratchet clamp head makes operation even faster, and the revised rotating clutch internals hold bikes more securely. This is the premier bike repair stand for mechanics who value class-leading light weight, a compact folded size, and rugged durability combined with unmatched stability, adjustability, and portability. -Patented, ratcheting action seatpost clamp features spinner knob for fast, one-handed operation and a push-button release. -Updated with more holding force, the 360-degree rotating clamp design provides easy access to any part of your bicycle. -Frame clamp positions from 42?-68? (107-180cm) in height. -Secure clamp with micro-adjustment secures and protects expensive components and beautifully painted frames. -New, rubber clamp jaw covers are tool-free replaceable. -Clamp opening up to 2.6? (6.6cm) accommodates the largest diameter frame tubes. -Anodized 6061 T6 aluminum construction is ultralight, corrosion resistant and incredibly durable. -Sturdy metal fittings and quick releases for a lifetime of duty in the field or at home. -Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces. -Working load range of 10-35lbs (4.5-16kg) accommodates service on road, cyclocross, and XC mountain bikes. Maximum capacity 75lbs (34kg). -Portable and compact construction creates a remarkably small folded footprint of 5? x 8? x 45? (13 x 20 x 115cm). -Separately available travel bag is water-resistant, durable and padded to protect your stand and your other equipment. -Quick-release fittings make setup and storage fast and convenient. -At 12.6lbs (5.7kg), traveling with this repair stand is easy. -A full ensemble of repair parts is available for long-term serviceability. -3-Year Warranty.

Introducing the Pro Mechanic HD bike repair stand from Feedback Sports. Based on their winning designs and proven engineering, this repair stand sets a new standard in lightweight, portable, and functional support for the modern bikes we love to ride. With oversized, anodized aluminum tubes, a wide and stable base, stronger jaws, and faster closure, the Pro Mechanic HD matches the expanded capability of today’s bicycles. It can support bikes up to 100 pounds (54.4kg) and tube diameters to 2.6 inches (6.6cm). Yet it’s lightweight and portable at 18 pounds (8kg) and 8”x43” (21cmx115cm) when folded for travel. -Oversized, anodized 6061 T6 aluminum construction is ultralight, corrosion-resistant and incredibly durable. -Ideally suited for heavier bicycles: 145% stiffer than Pro Elite. -Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces. -Total load capacity of 100lbs (45.5kg) accommodates service on all road, cyclocross, mountain bikes, and electric bikes. -Oversized rear tri knob to fix the position of a 360-degree rotating clamp, providing easy access to all parts of your bicycle. -Strong clutch design holds bike at any angle for repairs: 45% greater grip than Pro Elite. -New, ratcheting and rotating crank for jaw closure is faster and one-hand operable: closes 60% faster than Pro Elite. -Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes. -New, replaceable rubber pads on forged clamp and micro-adjustment secures and protects expensive components and beautifully painted frames. -Portable and compact construction creates a remarkably small folded footprint of 5" x 8" x 45" (13 x 20 x 115cm). -Quick-release fittings make setup and storage fast and easy. At 18lbs (8.1kg), hitting the road with this stand is never in question. -3-Year Manufacturer Warranty

The Feedback Sports RAKK is a patented, versatile bike storage idea for front or rear wheel parking. Making contact with only your tire, the RAKK is an ideal bike parking solution for expensive road, cyclocross, mountain and electric bikes. And if you have several bikes, its modular design supports add–ons.

- Mountain bikers are looking for adventure. They want their clip in shoes to not only be ideal for mountain biking but also hiking. The perfect balance of stiffness for pedal efficiency and flexibility for hiking off the bike. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon