Cassettes & Chains

Flattop technology is so much more than a distinctive look. It allows SRAM's 12-speed chain to be lighter, stronger and more durable than anything that came before. The Apex chain uses the same construction as the Rival and Force chains, with a polished gray finish. - Optimized for use with SRAM's Apex 12-Speed drivetrain - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Includes Flattop PowerLock connector - Chrome Hardened pins provide additional durability Specifications: Links (links): 120 Color: Gray Chain Connection Type: Single Use Master Link Half Link Chain: No Drivetrain Speeds: 12

No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH

- Cold-forged chromoly construction - 8 splines for removal - Oversize 3-pawl design - Heavy-duty use freewheel - 13T and 14T fit Flip-Flop hubs only - Speeds: Single - Width: 3/32"

- Fluid Drive Plus shift profiling, compatible with SRAM and Shimano 9sp drivetrains - Steel rings, engineering polymer spacers, nickel plated finish - 11-28 - 280g

- Converts any 8-10sp HG splined cassette hub to a Singlespeed - 3/32" cogs. 14mm and 19mm spacers can be swapped to fine tune chainline

- MODEL NO: CS-HG400-9 - SERIES: SHIMANO ALIVIO M4000 Series - Compatible chain: HG 9-speed - Speeds: 9-speed - Type: HG

Shimano Altus M2000 Series 9-speed cassette. Combinations: - 11 – 32T: 11-13-15-17-19-21-24-28-32T (bo) - 11 – 34T: 11-13-15-17-20-23-26-30-34T (bn) - 11 – 36T: 11-13-15-17-20-23-26-30-36T (bw)

The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts. - Rounded side plates are compatible with 8T and larger drivers - Color: Black - Width: 1/2 x 1/8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

The Acolyte 8-speed cassette gives you all the range you need to challenge yourself.  Whether you’re climbing the Cascades or the neighborhood sledding hill, all you have to think about is where to put the bike – Acolyte will take care of the rest.  And yes, it works with a standard HG freehub body and a normal 8-speed chain.

MicroSHIFT's H11 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Steel lock ring - Chrome plated for hardness and corrosion resistance Gear combinations: - 11-25T: 11-12-13-14-15-16-17-19-21-23-25 - 11-28T: 11-12-13-14-15-16-17-19-21-24-28 - 11-32T: 11-12-13-14-15-17-19-21-24-28-32 - 11-42T: 11-13-15-17-19-21-24-28-32-36-42

Problem Solvers Cog & Carrier adapts multi-speed Shimano HG freehubs for singlespeed use. - Wide-profile alloy cog carrier supports a single speed cog - 6-bolt chromoly cog included, compatible with 3/32" and 1/8" chains - Carrier is splined for Shimano HG freehub compatibility - Additional cogs available separately

- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links

Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links

8-speed SIS compatible freewheel

The KMC HL1L Wide chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear. - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Stretch-proof treatments provides exceptional durability - Hollow pin construction reduces chain weight - Links (links): 100 - Color: Black - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Bullet Pin - Half Link Chain: Yes

KMC, X11 GY/GY, Chain, Speed: 11, 5.5mm, Links: 118, Grey

- 1/2" x 3/32" - 116 Links - EPT anit-rust coating - 8 speed - Compatible with 18-21 24 Speed HG - Mushroomed Pin Riveted - 286 grams

- 1/2" x 1/8" - 113 Links - Includes Pre Attached Offset Link - Single speed - 1/8" Track Bikes & BMX Racing, Freestyle - Heavy Duty

- Range: 13T x 1/8"

When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.

- Steel - 7-speed

The M7100 chain provides enhanced chain retention thanks to an extended portion of the inner plate. The new chain features quick-link assembly and SIL-TEC treatment for extended offroad durability. - Extended inner plate improves chain engagement and retention - Reduced shift times and pedaling shock - Non-reusable - Features Shimano's SIL-TEC ultra-low friction surface treatment - Includes Shimano Quick-Link (SM-CN910-12) - This chain meets durability requirements for E-MTB applications

The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems

- E-Bike-compatible 7/8-speed chain with Diamond Hard Coating which reduces wear and increases surface hardness - 4-edged chamfered outer plates and inclined bridge provide improved shifting characteristics - Deep inner waist chamfer ensures quiet operations - Sub-punched pins for increased tensile strength

RS1 Cassettes are a great replacement for 10-speed road sytems. - Steel Spider - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Cassette Cogs: 11-12-13-14-15-17-19-21-24-28 - Drivetrain Speeds: 10 - Weight: 267 g

- SLX/105 chain 11-speed chain - Sil-Tec surface treatment on roller plates only - Weight: 257g - Now with quick link - Refer to Documents and links to find the right product

When it comes to adventurous riding, a wider gear range is often better. With 9 speed and a 11-42T range, the ADVENT cassette has the low gears you need to get up and the high gears to get back down. The steps between gears are optimized to give an even spread in gear ratios, reducing the need for double-shifting to find the right gear. - Machined aluminum large cog for reduced weight - Carbon steel cogs are continuously forged for strength and shifting accuracy - Compatible with standard freehub bodies - Surface Finish: ED Black / Anodized Black - Combination: 11-13-15-18-21-24-28-34-42

Shimano's Sora cassette is an incredible value for your 9-speed drivetrain. Crisp shifting and a low weight keep your mind focused on having fun on your bike and not adjusting it. This cassette comes in a range of sizes to suit your riding style and terrain.

Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level KMC X-Series chains. - Includes KMC Missing Link 11 - Optimized chamfer angles for superior stability in extreme chainlines - Upgraded outer plate chamfering for minimized cassette tooth interference - Double X-Bridge structure technology for improved shifting performance - Mushroomed Pin Riveted - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems

- 1/2" x 11/128" - 116 Links - EPT anti-rust coating - 9-speed - Compatible with Shimano, SRAM & Campagnolo 9 Speed Systems - Mushroomed Pin Riveted - 277 grams

Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE close - Inner-plate treated with SHIMANO's ultra-low friction surface treatment “SIL-TEC” (inner plate) - Same durability as current 10-speed chain BENEFIT close - System engineered drivetrain component for optimal power transfer - Smooth and precise front and rear shifting - Directional chain - Weight: 257g (114 Link)

Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.

Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.

- E-Bike-compatible single-speed chain with Diamond Hard Coating which reduces wear and increases surface hardness - Deep inner waist chamfer ensures quiet operation - Sub-punched pins for increased tensile strength

SRAM's 1071 chain is lightweight, smooth, and precise-shifting. It features the PowerLock connecting link and HollowPin construction for weight savings with no sacrifice of strength. - SRAM Road 10-speed compatible - HollowPin construction for weight savings with no sacrifice of strength - Features the PowerLock connecting link

Entry level 7/8-speed MTB crankset Forged alloy crank Steel chainrings Type: w/ Chainguard Length / Teeth: 170x48/38/28 Spindle Type: 129 SQR JIS Color: BLK/SIL Bolt Pattern: Riveted Speed: 3x6/7/8

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

CS-G110 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome-plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Aluminum lock ring Combinations: - 11 – 25T: 11-12-13-14-15-16-17-19-21-23-25 - 11 – 28T: 11-12-13-14-15-16-17-19-21-24-28 - 11 – 32T: 11-12-13-14-15-17-19-21-24-28-32

High-strength steel cassette for Shimano MTB. Shimano HG hub body compatible. Features: - 8-speed, 11 – 42T, 11 – 34T, 11 – 32T - Nickel-plated steel cogs (cogs larger than 40T are finished black)

SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.

SRAM's PG-970 9-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts.

- Offers a lighter weight, compact singlespeed drive - Converts any 8-10sp HG splined cassette hub to Singlespeed - Extra wide spline interface prevents cog from deforming hub splines - Cog is CNC machined CrMo, 1/2"x5/64" - Includes: 12T cog, 2 spacers, lockring

9-Speed Chains - Your All-Rounder Our 9-speed chains are compatible with all common road bike, touring bike and mountain bike gear systems. The innovative high-performance plate geometry gives all types of this series the very best gear-changing properties. And for highest resistance to wear and maximum strength, we have implemented an innovative process for radial riveting. Steel Value-priced with top performance: The standard model of the 9-speed chain series is robust and offers top gear-changing properties thanks to the high-performance plates. Always included with all 9-speed chains: the unique Connex Link. - Dimensions: 1/2" x 11/128" - Pin length: 6.60mm - Roller width: 2.20mm - Pin ejection pressure: >2000 N - Pin hardening: XHB - Links: 114 - Weight: 279g - For all 9-speed systems - Suitable for ATB/trekking, city/touring, mountain bike and road bike

Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-13-15-18-21-24-28 - 12 – 28T: 12-14-16-18-21-24-28 - 12 – 32T: 12-13-15-18-21-24-32

Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-12-14-16-18-21-24-28 - 11 – 32T: 11-12-14-16-18-21-26-32

Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-12-13-15-17-19-21-24-28 - 11 – 32T: 11-12-14-16-18-21-24-28-32 - 11 – 34T: 11-13-15-17-20-23-26-30-34

Origin-8's Ultim8 Single Speed Cassette Cog lets you have your ride any way you like it. This handy cog is dual use — a single speed cog that fits over a Shimano/SRAM freehub body or a fixed cog that bolts on in place of a 6-bolt brake rotor. A wide, zero-flex base design made of forged chromoly steel provides instant power transfer. Enjoy the Ultim8 ride whichever way you like it.

absoluteBLACK single speed cogs feature a unique tooth shape, narrow-wide profile, and perfect roundness. Crafted with CNC machined 7075 aluminum with an anodized finish for long-lasting construction. - Tooth design is wider and more "square-like" compared to other single speed cogs - The narrow-wide profile provides additional strength and offers greater chain retention - Compatible with 1X, 6, 7, 8, 9, 10, 11, and 12-speed chains - To utilize the narrow-wide feature, use a 9, 10, 11, or 12-speed chain - Not compatible with half-link chains - Compatible with Shimano HG cassette bodies

- 1/2" x 11/128" - 116 Links - TI (Titanium Nitride Coating Gold) - 10 speed - Compatible with Shimano, Sram & Campagnolo 10 Speed Systems - Mushroomed Pin Riveted - 273 grams

The Flattop technology of the SRAM Rival chain creates a lighter, quieter, stronger chain that's compatible with 12-speed 1x and 2x eTap AXS drivetrains. Ride far, long, and fast. This chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Use for both 1x and 2x eTap AXS - Includes Flattop PowerLock

CS-G100 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent shifting performance from cassette to cassette - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome-plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Aluminum lock ring Gear combinations: - 11-25T: 11-12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-14-15-17-19-21-24-28 - 11-36T: 11-13-15-17-19-21-24-28-32-36

You've got to have the right ratio for the track, and Shimano's Dura-Ace cogs come in a range of tooth counts so you can always be prepared. Manufactured from durable chromoly steel, each cog is machined to run perfectly straight.

• Steel • 8-speed

- E-Bike-compatible 9-speed chain with Diamond Hard Coating which reduces wear and increases surface hardness - 4-edged chamfered outer plates and inclined bridge provide improved shifting characteristics - Deep inner waist chamfer ensures quiet operations

Really popular solid selling half link chain. Extra wide and heat-treated mushroomed pins, stronger rollers and heat treated side plates provide maximum strength and durability. - 1/8" size, includes 98 links and 2 master pins - Colored chains are Teflon coated for low friction - Compatible with 8T driver and up - Links (links): 98 - Color: Pink - Width: 1/2 x 1/8" - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

Shimano Deore M6000 Series 10-speed cassette. - Cogs: 11-13-15-17-19-21-24-28-32-36T

10-speed chain for road, MTB, gravel, or e-bike. Specifications: - Nickel-plated - 1/2" x 11/128" - 118 links - Quick Connector Link - Compatible with Shimano, SRAM, Campagnolo

Shimano Deore M6000 CS-HG500-10 10-speed cassette. Combinations: - 11 – 25T: 11-12-13-14-15-17-19-21-23-25T - 12 – 28T: 12-13-14-15-17-19-21-23-25-28T - 11 – 32T: 11-12-14-16-18-20-22-25-28-32T - 11 – 34T: 11-13-15-17-19-21-23-26-30-34T

- English threads, 1.37 x 24tpi - 1/2 x 3/32'' freewheel

Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams. - Weight: 267g