Parts

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 334g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

LEV-Ci has defined what a lightweight dropper should be. Ultralight and strong, LEV-Ci is the result of using premium materials and proven technology. 7000-series alloy stanchion with reinforced carbon fiber mast Adjustable air sprung hydraulic cartridge Patented one-way roller clutch bearing Designed for internal frame routing Short insertion length to travel ratio Compatible with all KS Southpaw, KG and Westy remotes

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack based damper that features external incremental Low Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top level performance to a new price point.

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.

Mastodon is a real-world trail suspension for fat bikes. This fat bike fork delivers all-temperature performance, working equally well in winter or summer, soaking up chatter and big hits. Extended ride height versions fit up to 26×5.15” / 27.5×4.5” tires. Standard ride height versions fit up to 26×4” / 27.5×3.8” tires on the snow, or taking on shimmering hot sand like a pro. All-temperature performance is born of frigid winter ride-testing. 34mm trail chassis is stiffer and steers more precisely than any other fat bike suspension fork. - 100mm (Adjustable down to 80mm) or 120mm (Adjustable up to 140mm) Travel - Expert Air Spring - Absolute+ Compression Damping - TPC Rebound Damping - Extended platform accommodates 26" tires up to 5.15" and 27.5" tires up to 4.5" wide, and is optimized for frames that are designed around taller ride heights - Flawless performance down to 0 degrees Fahrenheit (-15 deg C) - VTT compression damper offers three positions: open, firm, and locked out - 15x150mm tooled Hexlock axle - 34mm aluminum stanchions provide stiffness and stability

Mastodon is a real-world trail suspension for fat bikes. This fat bike fork delivers all-temperature performance, working equally well in winter or summer, soaking up chatter and big hits. Extended ride height versions fit up to 26×5.15” / 27.5×4.5” tires. Standard ride height versions fit up to 26×4” / 27.5×3.8” tires on the snow, or taking on shimmering hot sand like a pro. All-temperature performance is born of frigid winter ride-testing. 34mm trail chassis is stiffer and steers more precisely than any other fat bike suspension fork. - 100mm (Adjustable down to 80mm) or 120mm (Adjustable up to 140mm) Travel - Expert Air Spring - Absolute+ Compression Damping - TPC Rebound Damping - Standard platform accommodates 26" tires up to 4" wide and 27.5" tires up to 3.8" wide and is optimized for frames that are designed around shorter ride heights - Flawless performance down to 0 degrees Fahrenheit (-15 deg C) - VTT compression damper offers three positions: open, firm, and locked out - 15x150mm tooled Hexlock axle - 34mm aluminum stanchions provide stiffness and stability

Rebirth of an Icon. The R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 expert pairs superior damping thanks to our 3-position dual piston VTT damper with a lightweight and stiff 32mm chassis. - VTT damper with compression open mode and rebound adjustability - 32mm black anodized 6000 series aluminum stanchions with Reverse-Arch design - Internally adjustable from 120 to 80mm in 10mm increments - Available in two different offsets 44 or 51mm

When mountain bike suspension first hit the ground, things were simpler. The best bike was the one you were riding; uphill, downhill, quick laps or all-day epics. The Bomber Z2 revives this purist mindset with a smooth and plush mountain bike fork that’s ready to ride out of the box. Trail riders rejoice — your low maintenance, high durability solution is here, and it’s worthy of the name Bomber. Long live fun. Features - Stiff 34mm chassis for precise steering and traction - Low maintenance Rail Damper for intuitive compression adjustment ?- Simple rebound adjustment for the set-and-forget rider - Travel options from 140-150mm (27.5), 100-140mm (29) - 44mm rake with option of 51mm in 29 LESS IS MORE The intuitive, built-from-the-ground-up Rail damper is easy to use with all the on-trail performance you need. A simple sweep adjuster can lock out for the climbs, open up for the descents and easily adjust to every type of terrain in between. PERFORMANCE WHERE IT MATTERS When we designed the Bomber Z2, we took out the things that don’t matter and kept the things that do. That means fewer clicky dials, but all the on-trail performance of a stiff chassis and butter-smooth damper, from top to bottom. THE GO ANYWHERE, DO (PRETTY MUCH) EVERYTHING MTB FORK The Bomber Z2 is built to get out the door and ride. No extensive setup procedure or inconvenient service schedules. Trail riding never felt this uncomplicated. Focus on what’s important — having fun on your bike.

The Z1 is freedom from the status quo. Step outside enduro's obsession with counting seconds and go have some fun in the woods. The Z1 is an aggressive all-mountain and enduro fork with a different viewpoint for riders' priorities. Everyone wants suspension performance that's smooth as butter with great traction and control, and that's where the Z1 shines. After that, the Z1 departs from industry norms. More time fiddling with adjustments means less time shredding the trails. The Z1 keeps it simple with intuitive compression sweep adjustment, from locked out to full open. Simple rebound adjustment covers the range from fast to slow rebound for a full range of rider weights and preferences without overcomplicating things. Plus, it's biased towards stiffness, ride performance, and durability, so while it's carrying a few extra grams, you probably won't notice because you're having too much fun. - 36mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QR x 110mm Boost axle - FIT GRIP damper with adjustable compression and rebound - FLOAT EVOL air spring

Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm

The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm

Riders asked for it, Marzocchi heard the call and proudly delivered a coil mountain bike fork worthy of its legendary predecessor. The Z1 Coil builds on the strong legacy of the original Bomber Z1 from the ‘90s that helped fuel the freeride movement. Weight weenies need not apply. Features: - Stout and proven 36mm chassis - GRIP damper - Ultra-lightweight tempered silicon-chromium steel spring, wrapped for near-silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster - Adjustable travel in 10mm increments with included internal spacers

Every innovation in Quarq’s next-generation DZero platform is channeled into DFour: 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the new Qalvin BLE app. The DFour91 is designed for Shimano’s Dura-Ace R9100 chainrings. It uses Quarq’s lightweight, sturdy ExogramTM carbon crank arms. GXP and BB30 versions work with every bottom bracket shell, including BBright and BB386EVO. - DFour is designed for Dura-Ace 9000 chainrings and compatible with Ultegra 6800 and 105 5800 chainrings - DFour91 is designed for Dura-Ace R9100 chainrings - Must be paired with a compatible SRAM bottom bracket - 8-bolt power meter owners can upgrade using a DFour or DFour91 power meter spider - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad -- no cadence magnet required - 10K Temperature Compensation - Battery — CR2032, 200-hour battery life, change without tools - OmniCal — swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy — within 1.5%, measuring both legs - Chainrings and bottom bracket sold separately

Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included

The one-piece carbon monocoque WCS Carbon Disc Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, offering a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers has been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as well as possible in the areas in which they occur—such as side load, torsion, and impact. The WCS Carbon Disc Road Fork features a 46mm rake and includes a compression plug. Welcoming flat-mount disc calipers, this fork also fits up to 30mm tires, depending on tire make and model. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 46mm - Axle-Crown: 371mm - Rake/Offset: 46mm - Spacing: 40mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 390g (with uncut steerer / not including axle)

With more than 40 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike. The new one-piece carbon monocoque WCS Adventure Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn't see. With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and fender mounts to keep the grime off you and your bike. The three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe. Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 48mm tires (depending on tire make and model)—making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering, and enjoying the adventure. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included)—(100x15mm thru-axle conversion kit available separately) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Axle-Crown: 393mm - Rake/Offset: 50mm - Spacing: 60mm - Minimum tire clearance: 4mm Road / 6mm Off-Road - Wheel compatibility: 700c / 650b - Rack and fender mounts - Multi-purpose mounts on fork blades (includes black stainless-steel bolts) - Fork max payload: 3kg per side - Weight: 445g (with uncut steerer / not including axle)

Tom Ritchey was riding off-road decades before gravel riding was ever a "thing," and the new WCS Carbon Cross Gravel Fork is the manifestation of the experiences enjoyed on all of those dirty rides mixed with the legendary engineering for which Ritchey is famous. Built from life and ready for your drop bar off-road adventures, this full monocoque carbon fork delivers precision and confidence while offering stability and comfort along some of the more rugged terrain you'll encounter. With logical features—like enough room tires up to 40mm wide, the ability to run 12 or 15mm thru-axles, and ability to run flat-mount disc brakes—the Ritchey WCS Cross Gravel Fork is ideal for long-distance gravel events, your local cyclocross series, spontaneous weekend adventures, and everything in between. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 47mm - Axle-Crown: 383mm - Rake/Offset: 47mm - Spacing: 53mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 430g (with uncut steerer / not including axle)

You love the accuracy, efficiency, and trail feedback that only a rigid mountain bike fork can provide. And, of course, you love carbon fiber. The Ritchey WCS Carbon Mountain Bike fork was made for you and your riding style. Our deep mountain biking heritage, decades of on-trail research, and mastery of modern materials come together to provide a fork that offers an unrivaled riding experience. The one-piece monocoque construction (WCS) of this fork also includes full carbon dropouts as well as non-removable, one-piece carbon disc brake tabs. This fork also features suspension-corrected axle-crown height, plus a Ritchey compression plug is included. - Material: carbon fiber - Quick release (not included) - Post Mount disc brake - Disc brake rotor compatibility: 160mm (max 180mm) - Steerer length: 300mm - Crown diameter: 50mm (straight 1-1/8”) – 61mm (tapered 1-1/2”) - Fork lenght: 459mm (27.5”) - 470mm (29”) - Rake/Offset: 42mm (27.5”) – 45mm (29”) - Spacing: 87mm - Minimum tire clearance: 6mm - Weight: 615g (with uncut steerer / not including axle)

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Hello Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. Features - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment - Offset: 40mm

Monarch Plus provides traction-gaining suppleness, giving you more control over any type of terrain – all in a lightweight bombproof package. Proven Rapid Recovery, DebonAir and Solo Air technologies come standard for this lightweight big hitter. Now with twice the rebound range, Monarch Plus allows you to take your riding to levels you never thought possible with a short and mid travel air shock. - WEIGHT: 335g - DAMPING: External rebound, 3-position compression (Open, Pedal, Lock) - CONFIGURATIONS: 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: DebonAir, High Volume Solo Air, Standard Solo Air - SPRING ADJUST: Air pressure via single schrader valve - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - OPTIONS: Also available in 195x46mm, 195x51mm, 216x57mm, 216x63mm with Specialized mount, 210x60mm with Trek mount - OTHER: *Weight based on RC3 216x63mm, standard air can, no hardware

- The all-new Super Deluxe Coil Ultimate was designed from the ground up, bells and whistles included. - Equipped with an entirely new chassis, the new RC2T damper with independent High and Low Speed Compression adjustment externally located for quick access, increased bushing overlap for improved small bump performance, and the HotDog Piston designed to keep your tires on top of rough terrain.

Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment

- RC2T damper is only found at the Ultimate level and features externally adjustable, truly independent High and Low Speed Compression along with an increased range of rebound adjustment. - Riders can fine-tune damping from the factory base tune for a more personalized feel while factoring in ride style and terrain.

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

With the Super Deluxe Coil Ultimate, no-nonsense performance is the name of the game. The Super Deluxe Coil Ultimate was designed to meet all the demands of the latest and greatest hard-hitting enduro and trail bikes. Featuring Maxima Plush fluid, this shock offers solid threshold adjustment for pedaling performance, ride quality, and compression adjustment to fine-tune for any condition. It's got the unmistakable feel of a coil spring all packed into RockShox's Super Deluxe design. - Separate and independent open and threshold pistons tuned exactly for your ride - Low-Speed Compression adjustment allowing fine-tuning of compression needs from the base tune - Maxima Plush damping fluid reduces friction and silences damper noise - BoXXer Red coil Signature color option (sold separately) - Coil Spring Sold Separately