Saddles/Seats/Seatposts

The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head

The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head

The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head

The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g

NCX Suspension Seatpost - Alloy construction - Coil spring with preload adjuster - Brass pivot bushings

The 611 Ergowave CrMo Saddle was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The chromoly version provides an economic option for those wanting to experience the benefits of the Ergowave. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures for improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. And for even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better damping properties than the 612, making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. The saddle rails on the non-active versions have been placed slightly closer together to allow for a more flexible shell which mimics the SQlab active technology and allows the saddle shell to follow the biomechanical motion when pedaling. This results in increased comfort, mobilization of the spinal discs and reduced pressure to the sit bones.

The M-D Line was developed for maximum relief of sensitive areas. A pressure distribution product designed by medical experts. The M-D Line stands for Maximized Dip, and in combination with the high classic step shape, distributes the weight of the rider to the sit bones, where it should be. The 602 M-D is for trekking bikes with moderate to upright sitting position. The relief of the perineum area is very high, 80%, which is normally sufficient for age-related, enlarged prostate. Thanks to the proven SQlab active system which allows the saddle to follow the pedaling movements of the rider, comfort is increased, less strain is placed on the inter-vertebral discs and pressure on the sitbones is further reduced. The flex and active movement can be adjusted to the body weight with the comfort sticks in the active damper. The Chromoly struts make the M-D Line suitable for heavier riders. SQlab recommends speaking with your doctor for any problems with your prostate or perenial nerves.

The 611 Ergowave S-Tube Saddle was designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures for improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. For even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612, making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. The saddle rails on the non-active versions have been placed slightly closer together to allow for a more flexible shell which mimics the SQlab active technology and allows the saddle shell to follow the biomechanical motion when pedaling. This results in increased comfort, mobilization of the spinal discs, and reduced pressure to the sit bones.

Wider nose and slightly more padding than the 611 model, with 12mm of shock absorbing cushion - Combination of all the Ergowave and ErgoLux advantages, staged shape provides more free space and less pressure - Incorporates SQlab's unique design where the nose drops down away from the rear of the saddle, allowing for 55% of the rider's weight to be transferred to the ischial or "sit bones" - The Active design offers dampened lateral tilt which allows the saddle to follow the biomechanical movement of the pelvis on each pedal stroke (3 interchangeable firmness inserts included) - High-end, aggressive saddle designed for Trail and Enduro riding - Tough upper material, Kevlar reinforced sides, and grip material on the rear of the saddle

Shorter—Narrower—Lighter—Faster. The 612-R offers more performance based ergonomics from 150 g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

The weight-optimized 611 Ergowave Carbon was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. At just 150g, it's the lightest 611 in the Ergowave family. The wave-like shape and raised rear section provide perfect rearward support and an optimal pressure distribution which reaches deep into the body structures to result in improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. For even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places.

The new 6OX Infinergy Ergowave active saddle utilizes BASF Infinergy cushioning (the same material used in running shoes). This material is very robust and brings comfort to a whole new level, especially in off-road conditions, due to its quicker recovery - The cover is not pulled over the entire surface of the saddle as in classic saddles. There are only "tapes" in the important places - Active design offers dampened lateral tilt which allows the saddle to follow the biomechanical movement of the pelvis on each pedal stroke

Shorter—Narrower—Lighter—Faster. The 612-R Carbon offers more performance based ergonomics from 125g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

The Champ Clamp is sure to hold your seatpost tight and in style. Key Features: CNC machined 6061 T6 aluminum Stainless steel hardware 31.8mm inner diameter Available in black, silver, gold, blue and red

Old school bmx style seat with the SE wings logo on the rear and lighting bolts down the side - Rad! Chrome plated steel rails with integrated bottle opener at the rear for after ride celebrations

The Raise it Up! seat features a super grippy and durable top cover that will keep your butt in place. The reinforced X-stitching on the back panel adds to the durability and longevity of this seat. And the SE bottle opener in the rear will come in handy after those long rides. -Extra grippy top cover -Reinforced X-stitching -8mm Cr-Mo rails -Protective bumper guards -Bottle opener brace

SDG Bel-Air Sport Saddles. The Bel-Air is practical and comfortable with a timeless, clean design for all-day comfort. - Ideal for: Recreational Trail and All Terrain Trekking - Rear rise platform provides enhanced pelvis rotation and power from a standard position down-curved nose, aids in climbing and prevents snagging - Plush PU foam - Nylon fiber base - 2pc stitched cover - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 270mm - Width: 140mm - Weight: 320g

- comfort, pressure relief groove on top - Synthetic top with Kevlar sides, or microfiber with Cordura sides, generous foam padding - Traditional railed saddle with nylon/carbon base. Nose and tail guards

- Synthetic Leather Cover - With Cordura Protected Sides - Slight Rear Rise Platform - Provides enhanced pelvis rotation and power from the standard position. - Peri-Canal - Continuous relief channel from tip to tail - Nose Platform - Oversized nose proportionate to saddle to aid in climbing - Plush PU Foam - For all-day riding comfort

DG Fly JR Children's Saddles. Researched and designed for smaller sit bones. - Ideal for: 20-24" Children MTB - Slight rear rise platform provides enhanced pelvis rotation and power from a standard position down curved nose, aids in climbing and prevents snagging - Utilizing the "Peri-Canal" which enables fore and aft movement without pressure in the perineum region - Plush PU foam - 2pc top with durable cordura sides - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g

- Free Float Comfort Flex - Position of rail inserts to increase wing flex and rider comfort, while enhancing pedaling efficiency. - Optimal Pressure Distribution - Platform designed to minimize pressure on both perineum & sit bones. - Flat Forward Design - Allows free movement on the saddle to shift weight around in aggressive riding positions. - Peri Canal Groove - Pronounced center channel on the saddle to ensure pressure relief. - Hidden Undercut - Cutout in the base to provide extra perineum comfort. - Nose Platform - Provides extra support when shifting to the front of the saddle when climbing. - Rear Buzz Cutout - Extra tire clearance for modern 29ers at full compression. - Microfiber Top - With Kevlar protected sides. - Dimensions: 270 x 138mm - Saddle Weight: 290g - Rail Material: Steel - Saddle Cover Material: Microfiber/Kevlar

- I-Beam: lightweight fiber composite single rail integrated into base - Same proven shape as the Patriot, but with additional padding - Wider and thicker nose for better handling characteristics - Full Kevlar cover with embossed graphics for superior durability

- Same proven shape as the Patriot, but with additional padding - Wider and thicker nose for pinching capabilities - Full Kevlar cover with embossed graphics for superior durability

- Flat-Forward Platform: Allows ease of movement on the saddle. - Rear Rise: Allows optimum power and comfort from a sitting position. - Nylon Glass Base with Bridge: Increases power transfer. - Deep Peri-Canal: Continuous relief channel from tip to tail. - Nose Platform: Wider nose to aid in climbing. - Cordura Protection: Added protection on corners of the saddle. - Injection EVA: Lightweight injection molded foam.

- I-Beam: lightweight fiber composite single rail integrated into base - Super low profile for strength and clean aesthetics - Minimal padding with 1pc embossed Kevlar for additional grip and durability - Requires SDG I-Beam specific seatpost

SDG Bel-Air Sport Saddles. The Bel-Air is practical and comfortable with a timeless, clean design for all-day comfort. - Ideal for: Recreational Trail and All-Terrain Trekking - Rear rise platform provides enhanced pelvis rotation and power from a standard position down-curved nose, aids in climbing and prevents snagging - Plush PU foam - Nylon fiber base - 2pc stitched cover - Rail Material: Chromoly - Clamp Style: Standard Rails - Material: Synthetic - Length: 270mm - Width: 140mm - Weight: 320g

- Atmos Sealed Construction - Eliminates need for staples and bumpers on base of saddle. - Flat-Forward Platform - Allows ease of movement on the saddle. - Rear Rise - Allows optimum power and comfort from sitting position. - Nylon Glass Base With Bridge - Increases power transfer. - Deep Peri-Canal - Continuous relief channel from tip to tail. - Nose Platform - Wider nose to aid in climbing. - Sonic Weld - Added protection on corners of saddle. - Injection EVA - Lightweight injection-molded foam. - Dimensions: 260 x 140mm - Saddle Weight: 318g - Rail Material: Steel - Saddle Cover Material: Microfiber

SDG Duster MTN Performance Mountain Saddles. Rugged, durable and all-day comfort with durable sides. - Ideal for: All Mountain, Trail, Enduro - Utilizing the deep "Peri-Canal" which enables fore and aft movement without pressure in the perineum region - Flat and squared-off nose to extend ease of movement to the front of the saddle - Plush Mid-Density EVA foam and nylon-fiber-composite base with D2 Edge - Flex that provide softened edges for optimal pedal strokes - 2pc microfiber top with aramid sides - Rail Material: Chromoly - Clamp Style: Standard Rails - Material: Synthetic - Length: 285mm - Width: 140mm - Weight: 300g

Built for performance and all-day comfort. - Free Float Comfort Flex-position of rail inserts to increase wing flex and rider comfort, while enhancing pedalling efficiency - Platform designed to minimize pressure on both perineum & sit bones - Allows free movement on the saddle to shift weight around in aggressive riding positions - Pronounced center channel on the saddle to ensure pressure relief - Cut-out in the base to provide extra perineum comfort - Provides extra support to ensure optimal power transfer - Provides extra support when shifting to the front of the saddle when climbing - Extra tire clearance for modern 29ers at full compression - Rail Material: Chromoly - Clamp Style: Standard Rails - Material: Synthetic - Length: 270mm - Width: 138mm - Weight: 230g

- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles