Filter By:
- Lubes/Cleaners (273)
- Tools (1211)
- Tool Kits & Sets (4)
- Wheel & Drivetrain Tools (4)
- Aprons (1)
- Workstands (72)
- Workstand Accessories (1)
- Multi Tools (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Workstands
$36.99
Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened
$36.99
- Also for clenching and separating of from cables and other sensitive objects
- Serrated gripping surface
- Cutting edges induction hardened
$38.99
Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened
$38.99
Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position
$44.99
- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps.
- In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.
$44.99
- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8
- TX wrenches 10, 25
- PH1 screwdriver
- Chain tool
- Schrader & Presta valve tool
$49.99
- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8
- TX wrenches 10, 25
- PH1 screwdriver
- Chain tool
- Schrader & Presta valve tool
- Flat screwdriver 1.0 x 5.0
- Spoke Key 3.3, 3.45 and DT
$52.99
- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.
$84.99
- Accuracy: 0.02mm/0.001"
- Measuring speed:1.5m/sec
- Made according to standard DIN 862
- Dual scale in inch and mm
$99.00
$99.99
1% Off
- Pedal thread inserts are used to replace damaged threads in cranks
$129.99
- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting
- Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads
- Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions
$144.99 - $164.99
- Ratchet operates in clockwise and anti-clockwise directions
- For tightening on right hand threaded bolts and nuts
- Signal when set torque is reached
- Default value for the recalibration interval is 12 months of use, or approximately 5000 cycles
- Dual scaled, Nm and Kgm
$299.99
- Crank Saver—Pedal thread repair and insert kit
- Includes: left and right reaming tap 5/8x24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal box with cut out SOS foam trays.
$499.99
Redesigned!
We've made the base stronger for better stability. One-size-fits-all conical thru-axle adapters are now included with the stand, and are held in place by magnets when not in use.
The arms have been made longer to accommodate 29+ wheels better and the calipers widened accordingly. Threads, springs and bearings were all revised resulting in smoother operation plus less frequent calibration.
Additionally, we include white high-gloss stickers you can apply to the base and caliper arm to improve background contrast, making it easier than ever to use.
-Stronger base for improved precision
-Longer and redesigned upright arms for improved clearance of 29+ wheels
-Wider calipers for increased clearance of 29+ wheels
-Accommodates wider axles, works with through axle hubs up to 197mm width (include the use of adapters). Max. arm opening 230mm (without the use of adapters).
-New bearings on the upright arm adjust axle are spring loaded for improved precision and reduced frequency of calibration
-Redesigned caliper tips for easier radial truing
-Revised threads and springs for smoother operation
-8mm bench mount holes at the bottom, 268 mm center to center
-Slicker design, all black. Includes white high gloss stickers, covering the base and caliper arm, for improved background contrast (stickers are not preapplied)
-Comes with conical magnetic through axle adapters – one size fits all (12, 15 and 20). The adapters are now magnetic and can be affixed anywhere on the base. Features a bolt for more permanent fix on the upright arms.
Compatibility:
-Accepts wheels from 16 to 29+ inch with or without tire. Supports solid, quick release and through axle hubs
-Accepts hubs up to 197mm when using our thru axle adapters, 230mm without.
-Through axle hubs are supported with use of the adapters (included)
-One pair of through axle adapters support all sizes of through axles
$2,899.99
- Electric repair stand is not just powerful, but also smart. It features endless height adjust, but it can also lift or descend a bike automatically with a push of a button. It also stops on its own when bike reaches the ground.
- Endless height adjust, travel adjust limiters, internal routed cables
- Equipped with Master shop repair clamp 1693.1M
- Secures directly to the floor or on a heavy-duty metal fixed plate
- Measurement: W750xL750xH2072 mm
- Weight: 106 kg (with a steel fixed plate)
- Load capacity: 400N (40kg)
$26.00
$28.00
7% Off
- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms)
- CNC machined, heat treated steel construction
- 1/2" ratchet drive and 32mm wrench flat tool interfaces
$42.00
- Fits Truvativ GXP and Howitzer external-bearing bottom brackets with 16-spline/notched cups (also fits Shimano HollowTech-II bottom brackets)
- CNC machined, heat treated steel construction
- 1/2" ratchet drive and 32mm wrench flat tool interfaces
$4.99 - $147.15
$4.99 - $147.15
Up to 13% Off
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$7.99
Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates.
- Specifically designed for lubricating chains
- Applicator is not included or needed because of the product's consistency
$19.93 - $19.99
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$19.95
Tri-Flow® Superior Lubricant is a superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. The aerosol spray action allows you to have a focused spray for even application. High-grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475°F) and humidity. Formulated solvents soften and remove dirt and contaminants, while special additives displace moisture and prevent rust and corrosion. Formulated with P.T.F.E.
$19.99
Tri-Flow Synthetic Grease is specially formulated to lubricate any surface that slides, glides, rolls, twists, turns or spins.
- Non-melting, waterproof formula designed to seal out water and contaminates and prevent rust and corrosion under extreme temperatures
- Fully compatible with most rubbers and plastics
$20.99
Citrus Cleaner/Degreaser provides a powerful foaming action that cuts through and cleans the toughest grease, dirt and oil.
- Easy to use trigger allows user to lay down a layer of foam that will cling and penetrate into the part to provide superior cleaning performance
- Quick evaporation technology leaves no residue and needs no rinsing
- Biodegradable formula
$25.67
Tri-Flow Red Grease is a premium quality, extreme pressure, multi-purpose aluminum complex grease. It features outstanding performance in high temperature applications and is waterproof.
$9.95
Topeak's Shuttle Levers are strong enough for even the busiest shops; think what they'll do for that tight road tire and fat downhill rubber. These levers are extra long for leverage and are made of engineering-grade plastic with stainless-steel reinforcements down the middle that ensures years of hard use.
$14.95
Perfect for trailside repairs and for your home shop, Topeak's Universal Chain Tool is compatible with all chains and removes and installs pins with ease. Plus, there's even a compartment to hold spare pins, an integrated chain pin breaker and a removable chain hook to hold your chain while you work.
$17.95
Topeak's X-Tool+ is an in intelligently designed, 11-function folding multi-tool that can easily handle most mid-ride adjustments and repairs. Perfect for everyday cycling, its updated design secures an 8mm hex tool bit between the tool's sides, allowing for a tight-folding design with extra capabilities. Includes a T20 / 2.5mm L-type wrench that can also be used to tighten the hinge pins of the X-Tool.
- Allen wrenches: 2 / 2.5 / 3 / 4 / 5 / 6mm
- 8mm hex tool bit
- Torx wrench: T20 / T25
- #2 Phillips screwdriver
- Weight: 112g
$18.95
- Two sturdy tire levers also work as a chain master link tool to remove and install chains
- Includes a chain hook to make installation and removal easy
- Features a valve core tool as well as a place to store a spare quick link
$19.95
This lightweight, compact tool includes Torx sizes (T10/T15/T20/T25) to work on modern bike components while other popular tools, (1.5mm/2mm/3mm/4mm/5mm/Phillips), help with your repair or maintenance needs.
- Functions: 10
- Allen Wrenches 1.5 / 2 / 3 / 4 / 5 mm
- Torx Wrenches T10 / T15 / T20 / T25
- Screw Drivers #2 Phillips