Wheels

End caps for front conversion hubs.

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Hollow Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 110mm - 1 axle per bag

Did you trash the bearings on your WTP Supreme rear hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.

Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular

The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.

The mounting solution for thru-bolt front wheels. Designed for an axle diameter of 9mm in the front, the thru-bolt system is a special kind of axle mounting for bikes. The DT Swiss thru-bolt system is compatible with standard quick-release dropouts but requires hubs that are compatible with the Thru Bolt. The stronger wheel connection results in greater stiffness. - Overall Length: 115mm - Thread Pitch: M9 x 1.0mm - Flat Washer

Maximum stiffness and highest safety—the RWS quick release for road and MTB. Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.

The mounting solution for Thru Bolt rear wheels. Designed for an axle diameter of 10mm in the rear, the thru bolt system is a special kind of axle mounting for bikes. The DT Swiss thru bolt system is compatible with standard quick-release dropouts, but requires matching hubs. The stronger wheel connection results in greater stiffness. - Overall Length: 152mm - Thread Pitch: M10 x 1.0mm - Flat Washer

Maximum stiffness and highest safety—the RWS Quick Release for road and MTB. Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.

Rear Wheel Axle for X0 hubs, including the following wheels: Rise 60 (B1), Roam 30, Roam 40, Rail 40, Rise XX, Roam 50, 60 B1 Compatible with part numbers: HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1

- M-Pulse front axles incorporate drive-side end cap and rear axles the non-drive side end cap - Neo OS axles are steel and compatible with standard Neo hubs for riders looking for a steel option - Instructions and hub axle determinations are available

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Thread Pitch: 12 x 1.0mm

- The Mavic Mountain Wheel Bag is constructed of a heavy-duty nylon. - The center of the bag has is reinforced rubber to protect the axles. - Every bag is equipped with handles and a pocket inside. - Works with mountain 24"/26" wheels. Each bag holds one wheel. Details: - Fits one wheel - Inside skewer pocket - Reinfiorced internal pads where the hub sits - Carries 24-700 C wheel sizes plus the tire

These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.

Valve stem extenders for tubular tires and tubes with removable valve core. Sold as a set of two extenders.

Shimano Alfine and Nexus, Rear Hub Nuts, Cog Snap Ring and Non-Turn Washers for 38deg Horizontal Dropouts Shimano Internally Geared Hub Small Parts Kits Alfine hubs are packaged without small parts and require this kit plus a cog Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit Cassette joint does not fit Di2 Alfine hubs

Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.

Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set

12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.

- Anodized aluminum or plated brass. - 50 per bag - 16mm length

Adapts HEX 32 J-Type Front Hubs to 15x100. Compatible with: - HEX J-Type 32H Boost and non-Boost Front Wheels - Also compatible as replacement 15x110 adapters for HEX 32 J-Type Boost Front Hubs. Not compatible with: - HEX 28 Straightpull or HEX Gravel Front Hubs - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs

Tubeless setup should be a "set it and forget it" affair. SPANK's tubeless valves are constructed of durable brass material and a tapered round rubber base which fits a wide range of rim designs. The extra-long shafts accommodate even the deepest well rims and most troublesome of pumps. Sealed removable valve cores for sealant injection make set up or topping up a breeze. - Material: Brass shaft, rubber plug - Weight (g): ±18/set - Length (mm): 40 shaft (55 total length) - Features: 2 pcs per set, removable valve core for sealant injection

When top EWS Pro Riders ask you to develop a stiffer more durable fork axle, you listen. The stock 15mm axles and other lightweight aftermarket options were simply not tough enough for their race bikes. We don't quite ride at the pace of an EWS Pro, but we loved the simplicity and clean look of the axle so we made them available to buy. Axle F is 98% stronger and stiffer than a stock 15mm axle, yet still 20g lighter than a QR. We've replaced the QR lever with a simple 6mm hex. If you already carry the EDC multitool with you, there's no need for the heavy and bulky QR lever. FEATURES - 98% Stiffer and stronger than stock 15mm QR thru axle - 20g Lighter than stock QR thru axle - Low profile hex head won't get caught on trailside obstacles. COMPATIBILITY - For Fox and RockShox 15mm axle forks (Boost and Non Boost) - NOT compatible with RockShox RS-1 fork or Fox 36 Pinch Bolt Style (2016 and older) - NOT compatible with floating thru axles from 2021 Fox 36, 38 or 40 WEIGHT - RockShox Boost (15x110) 63g - RockShox Non Boost (15x100) 59g - Fox Boost (15x110) 61g - Fox Non Boost (15x100) 58g MATERIAL - 6061-T6 Aluminum

SPANK SPOON Hub Single Speed Conversion Kit. - Cassette spacers - 13T driver cog - Cassette lock ring

Designed to be stiff and durable enough to meet the demands of modern mountain bike riding, the Ritchey WCS BOOST fork thru-axle offers confidence and control for whatever kind of trails you're into. - Type: thru-axle - Material: 7075 Alloy - Axle Length: 135mm - Diameter: 15mm - Thread diameter: M15 - Thread pitch: 1.2mm - Head: hex 6mm - Weight: 63g - Color: black

Classic & Comp Road Wheels Front Axle Adapter.

15x110 Torque Cap Adapters for HEX 32 J-Type Boost Front Hubs. Compatible With: - HEX J-Type 32H Boost Front Wheels Not compatible with: - HEX Straightpull or Gravel Front Wheels (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs - Non-Boost hubs