Wheels

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #16 Clutch Ring

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

-Replacement freehub body -Compatible with Bontrager Pro-level hubs -130/135mm O.L.D. -Shimano/SRAM MTB/Road 8/9/10-speed

- Replacement freehub body - Compatible with Bontrager Pro-level hubs - 130mm OLD - Campagnolo

Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal wheel magnets work with any speed sensor - Thread-on speed magnet is positioned closer to the sensor for improved signal - Aero speed magnet provides a sleek, low-profile, aerodynamic solution

- High-quality replacement hub bearings for Bontrager System Wheels - 28mm x 15mm x 7mm

These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

High-quality replacement hub bearings for Bontrager System Wheels. 30mm x 18mm x 7mm

Replacement bearing for rear driveside on Spline 1200, 2nd generation 1501 and DiCut disc wheels Genuine DT Swiss replacement - steel bearings, 240 quality Sold individually Model: 1526 Fit: Various hubs I.D.: 15mm O.D.: 26mm Width: 7mm Weight: 11.2g

Various road surfaces or weather conditions cannot deter you: the endurance-specific ERC 1100 wheels enable you to ride fast and stable. With AERO+ optimized rim profiles, wider and more comfortable tires are better supported. Ultra low-friction SINC Ceramic bearings inside DICUT Aero hubs and the latest generation of DT Swiss aero spokes are technical highlights inside the wheels. The proven Ratchet EXP freehub system with its 36T Ratchets transfers each pedal stroke precisely into forward propulsion and speed – from the start right to the finish of your ride Aero-optimized wheels with Carbon rim supports your ride on different road profiles. Whether you enjoy an easier longer climb or the following smooth descend, riding will feel almost effortless DiCut aero 180 hub with 36t SL Ratchet System, SINC ceramic bearings, Shimano Road and SRAM XDR Road freehub body kits T-head spokes are built with a 2-cross pattern Includes tubeless tape, tubeless valve and refill kit, 6-bolt adapter, valve guard, QR end caps and wheel bag Wheel Size: 700c ISO Diameter: 622 / road / 700c Hub/Brake Compatibility: Center-Lock Disc, 6-Bolt Disc Cassette Body Type: Shimano/SRAM 11 Speed Road, SRAM XDR Valve: Presta Rim Width (Internal): 22mm Tire Type: Tubeless Ready Clincher Front Axle: 12 x 100mm TA Rear Axle: 10 x 135mm QR, 12 x 142mm TA Color: Black

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. Allows for easy installation on Rock Shox Torque Cap compatible forks Fits all 15mm thru axle 350 hubs as well as 1700 and 1900 series front wheels Does not fit QR hubs

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. - Tubeless ready, 25mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape Specifications: Hub/Brake Compatibility: Center-Lock Disc Color: Black Wheel Size: 29" ISO Diameter: 622 / road / 29" Front Axle: 15mm Thru x 110mm Valve: Presta Rim Width (Internal): 25 Defined Color: Black Tire Type: Tubeless Ready Clincher

DT Swiss X 1900 Spline 25 Rear Wheel - 29", 12 x 148mm, Center-Lock, HG 11 MTN, Black Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. - Tubeless ready, 25mm wide and light rim -Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape - Spline Hub with Ratchet LN 18T freehub drive system Specifications: Hub/Brake Compatibility: Center-Lock Disc Color: Black Wheel Size: 29" Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain ISO Diameter: 622 / road / 29" Valve: Presta Rim Width (Internal): 25 Defined Color: Black Tire Type: Tubeless Ready Clincher Rear Axle: 12mm Thru x 148mm

DT Swiss X 1900 Spline 25 Rear Wheel - 29", 12 x 148mm, Center-Lock, Micro Spline, Black Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. - Tubeless ready, 25mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape - Spline Hub with Ratchet LN 18T freehub drive system Specifications: Hub/Brake Compatibility: Center-Lock Disc Color: Black Wheel Size: 29" Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain ISO Diameter: 622 / road / 29" Valve: Presta Rim Width (Internal): 25 Defined Color: Black Tire Type: Tubeless Ready Clincher Rear Axle: 12mm Thru x 148mm

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. 135mm x 12mm thru axle end cap kit for DT 240, 350 and 440 hubs with XD Driver for SRAM 11-speed cassette

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps - Also used for 12 x 157mm, 12 x 177mm and 12 x 197mm spacing - End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps - fits 180, 240, 350, 440

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.

DT Pro Head nipples are designed for short spokes with a large angle of deflexion such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to a homogeneous power transmission. The special shape of the head prevents the nipple of tilting in the rim base, which is a great advantage for wheel building. They are available with or without the patented DT Pro Lock locking system. Note: brass nipples are not approved for children’s products in the USA.

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

Parts for repair and maintenance of DT Swiss hubs.

Parts for repair and maintenance of DT Swiss hubs. Fits 360/370 DT Swiss 3 pawl hubs Special Tool TL1917 required for removal & installation

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

Replacement parts for Enve hubs.

The SES 2.3 is purpose-built for going up. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Front and rear optimzed depths and shapes (27mm front, 32mm rear) - 21mm internal width is optimized for ENVE 27mm tires - Hookless tubeless rim is compatible with 25mm-32mm tires

A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers. 

Size: IG 7-speed FT/RR: Rear Diameter: 26" Type: Clincher Cassette Compatibility: IG 7-speed Hub Width: 170mm Holes: 36 Butting: 14 Cross Section: Round Brake Type: 6-bolt disc Attachment: Bolt-on Nipple Locking Type: Not applicable Valve: Schrader Rim Material: Aluminum

ABI Standard Design Cartridge Bearings. 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed Specs: -Thickness: 9 -Material: Steel -Bearing O.D. (mm): 30 -Manufacturer Number: 6200 -Bearing I.D. (mm): 10