Your Search: "fat"

Designed to pair with our lightweight apparel system and Ragnarok shoe, this winter bike hat serves as a liner layer to cover your head and ears on chilly days. The Merino wool blend fabric wicks moisture to keep you dry, and the flat-seam construction makes for a comfortable, helmet-friendly fit. - Merino wool-blend fabric throughout - Flat-seam construction - Helmet-friendly - 45°F+ (7°C+) COMFORT

This warm, comfortable pom beanie keeps heads warm when the sun goes down. - Soft 100% acrylic yarn - One size fits most

This deep-winter biking hat features a fleece top and an insulated ear-and-neck band to retain body heat. The ripstop outer fabric blocks wind and moisture, while the soft, foldable brim shields eyes from the sun. - Helmet-friendly design - 300 g low-profile fleece top - 80 g Primaloft insulation in the ear-and-neck band - Polyester ripstop outer fabric - Soft, foldable brim for packability

This deep-winter biking hat features a fleece top and an insulated ear-and-neck band to retain body heat. The ripstop outer fabric blocks wind and moisture, while the soft, foldable brim shields eyes from the sun. - Helmet-friendly design - 300g low-profile fleece top - 80g Primaloft insulation in the ear-and-neck band - Polyester ripstop outer fabric - Soft, foldable brim for packability - 0°F (-18°C) to 15°F (-9°C) Comfort

Biking in the cold just got more comfortable: our Stovepipe cap protects against brutal windchill with a stretchy wind-proof shell fabric on the top and front. A soft Merino wool-blend fabric over the ears and on the back wicks moisture and helps regulate body temperature. The low-cut front covers the forehead, eliminating the cold gap between your eyewear and helmet. - Wind-blocking panels - Merino wool-blend lining for moisture-wicking - Long cut protects ears, neck, and forehead - Integrated eyewear slots - 3-panel design fits perfectly under helmets - 0°F (-18°C) TO 25°F (-4°C) COMFORT

- Double layer construction - wind stopper softshell fabric on dome - Breathable merino wool blend over ears and back of done for breathability - Ear opening for sunglasses to easily pass through for fit - Flat seam construction - helmet friendly

From hardpack groomed trails to soft backcountry pursuits, Hüsker Dü’s 4.8 inch wide casing offers a huge footprint while maintaining rolling efficiency for the best balance of speed and float. Built around the perfect balance of low rolling resistance, traction and flotation, shorter center treads roll faster, and slightly taller shoulder knobs give more bite when cornering. An overall reduced lug count, combined with a tubeless-ready bead make the 4.8” Hüsker Dü a great option for any winter fat bike adventure. - 4.8” casing offers the most float of any 45NRTH tire - Ideal for loose conditions at low pressure - Reduced lug count for rolling efficiency on harder packed trails - Tall shoulder lugs increase cornering traction

Let Dunderbeist loose on your local groomed single track and feel the aggressive tread claw through the snow with unrivaled propulsion and braking traction. Its 4.6-inch footprint provides enhanced flotation and is compatible with a wide range of frames. Dual compound rubber rolls fast and keeps you in control while shredding the berms. Point uphill and feel the Dunderbeist dig in as you attack climbs covered in loose, unconsolidated snow. Pair Dunderbeist with its sibling front tire, Flowbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a rear tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Flowbeist front tire

Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a front tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Dunderbeist rear tire

Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice. Details: - Fast-rolling center tread for carrying speed - Large, braced side lugs for predictable cornering performance - Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern - 60 TPI and 120 TPI casing options - Tubeless-ready for supple ride quality, more grip, and weight savings - We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Custom studdable up to 252 studs - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

Wrathlorde is an extreme-conditions fat bike tire designed for ultimate traction on challenging surfaces. Aggressive, tightly-spaced lugs decrease rolling resistance without compromising on traction, while 300 XL concave studs bite into ice for complete confidence. - 120 TPI tubeless-ready casing - Aggressive, tightly spaced center lugs with siping for a blend of rolling speed and traction - Tall side lugs for traction in corners - 300 XL Concave Studs for ultimate traction on ice - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Improved and accurate fit Afton’s second generation Intact® rubber is more resilient and less susceptible to tears 2018 Design & Innovation Award winner for its internal shank technology Mono-directional interior shank supports your foot on the pedal during impacts, assists in energy transfer when pedaling, and reduces vibration yet flexes to allow normal walking Outsole constructed specifically to interface with a flat pedal yet provide traction when climbing and descending hills off the bike Reinforced toe box with additional protective PU taping protect your toes and shoes from rock deflections and impacts

We’ve just made the dumbest socks ever! Go Ride Your Bike! Tiny Hats Forever! The Name: There is a brewery in South Minneapolis where if you’re a member of the cycling community no matter when you show up, it’s almost guaranteed that a few of your friends are already there. It’s the spot to be. One of the bartenders, who previously had not interacted much with cyclists, started using “tiny hats” as a group reference. As in “oh, you’re one of the tiny hats.” We thought this was hilarious, so we ran with it. Material: 75% TurboWool (50% Merino wool and 50% polypropylene), 15% nylon, 10% spandex Origin: Made by Sockguy in the U.S.A.

Coming in classic black with a colorful rider icon up front and the All-City name on the back, the Parthenon party hat features an unstructured five-panel design and a comfortable curled bill. Toss it on for easy style and comfort between trims. - Adjustable snapback - One size fits most

A cross-inspired bike built to conquer the city streets, the Super Professional features the 2-For-1 Dropout, All-City's elegantly designed combination geared or single-speed sliding dropout system. Fast, responsive, agile, and capable on mixed terrain, the Super Professional can be converted from single-speed to geared or back again to crush all your daily deeds and commutes. - 612 Select Tubing - Features All-City's 2-For-1 Dropout, a beautifully crafted sliding dropout system - Signature fork crown with four-point rack mounts - Two bottle cage mounts, plus mounts in front and rear for racks and fenders - 12mm thru-axles, flat-mount brakes

Animal Mark Gralla Signature Rat Trap Pedals 9/16"

The Rat Trap pedals feature a nylon based plastic construction with a wide, slim body. - Chromoly spindle with unsealed bearings - Additional corner pins to reduce slipping - 9/16"

CrMo with internal taper for best strength-to-weight

Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.

Dan Paley signature grips: Dan Paley is really fussy when it comes to grips, not too fat, not too thin, not too squishy, the list goes on. The Dan Paley Slims however are just right. - Flangeless Dan Paley zigzag design - Krayton rubber - Bar ends included

Single bolt design, 2.5pc cranks. Now in new Flat Raw and Flat Black finishes... Heat treated 4130 chromoly arms with rectangular cross section for increased stiffness. Heat treated 4130 chromoly 22mm diameter CNC machined 48 spline hollow spindle. Extra beefy pedal boss with angle on the back for frame clearance. RHD/LHD compatible.

The Sureshot is designed with a more ramp/park/trails geometry than our other frames. Utilizing a low BB, longer rear end, mellower head angle and removable brake lugs, this frame is a true all rounder. - Tubing: Sanko Japanese seamless 4130 chromoly - Brake mounts: removable - brake kit available separately

The ALVX AF+ is the latest version of Alex Donnachie’s signature ALVX frame. Featuring the same super tech geometry and ultra short rear end, but now with an updated invest cast chainstay yoke which maintains the tire clearance as well as creating a more rigid rear triangle and it also looks pretty sick. - Invest cast chainstay yoke which creates more clearance for the tire for when your wheel is slammed, because this part is cast and heat treated it strengthens the rear end of the frame by stiffening it up - 7mm thick invest cast dropouts to provide good support for your axle, and the small shape has been designed for grinding meaning there's no overhang to catch on ledges or rails,. The dropout is heat treated before welding making it extra tough with integrated chain tensioner bolts inside - Brake mounts: none - External gussets for strength - Sanko Japanese seamless 4130 chromoly

BSD Freedom is Kriss Kyle's signature frame, designed to perform well on all terrain. This frame combines the stability of a low 11.5" BB, the responsiveness of a 75 degree head angle and the versatility of a short rear end. To create a stiffer rear triangle we've utilized an invest cast wishbone and invest cast seatstay bridge. - Constructed from Japanese Sanko seamless 4130 chromoly tubing, triple butted - Removable brake mounts, brake kit sold separately - Head tube and bottom bracket heat treated and CNC machined 4130 - Heat treated and investment cast 4130: chainstay wishbone, dropouts, and seatclamp - Frame weight: 5 lbs

The Grime frame is the signature frame of Denim Cox. Whether he's riding motocross, Barbie bikes or BMX, you know Denim tears it up on all terrain. Designed to Denim’s specification, with a steep 75.5 headangle, a 12.8 - 13.2” rear end length with an invest cast chainstay yoke for extra tire clearance and a 9” standover.

Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems. - 10mm SPD/MTB compatible cleat screws - 4mm Hex countersunk M5x0.8 - Compatible with most 2-hole cleats - Black oxide-coated carbon steel - 25 pieces