Write a Review

Engineered for speed and elevated performance. At 29% lighter, 2.3% more aerodynamic, and providing 5.4% better cooling and ventilation than its predecessor Lazer Bullet 2.0, the Vento KinetiCore packs superior comfort and performance-driven features for those seeking more than just marginal gains. KinetiCore by Lazer is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built better by design. Integrated right into the helmet instead of added on after, KinetiCore delivers next-level protection in addition to weight reduction and increased ventilation. The highly breathable Vento KinetiCore is designed in sprint position at a 15-degree angle to maximize aerodynamic performance and features an advanced ventilation system to facilitate cooling — pushing you to go further with a helmet that works as hard as you do. The easy fit ScrollSys belt tailors the helmet to your head in seconds, while the convenient silicone docking system keeps eyewear secure when not in use. Compatibility with the Universal Lazer LED light ensures you're visible under any light or weather conditions. This helmet scores an esteemed "Best Available" 5-star protection rating from Virginia Tech. - WEIGHT: 290g (size medium) - MATERIAL: EPS Foam, Polycarbonate, Nylon - FIT SYSTEM: ScrollSys - VENTILATION: 13 - ROTATIONAL PROTECTION: Lazer KinetiCore - CERTIFICATION: CPSC - ACCESSORIES: Optional Universal LED Features: Built for Speed Designed in sprint position at a 15-degree angle with a reduced frontal surface for superior aerodynamic performance. Eyewear Docking Silicone Keep your eyewear secure and out of your line of vision when not in use by tucking it into the vent docking system. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. LED Light Compatible Increase visibility by attaching the Universal Lazer LED at the back of the helmet and stay seen no matter what the light or weather conditions are. Precise Fit Refine your perfect fit with the easy to use ScrollSys belt for quick adjustment on the fly. The floating front headband increases airflow and eliminates pressure points, so you can focus on the ride ahead, not on adjusting your gear. Work Hard, Stay Cool Venturi advanced ventilation system draws cool air in and expels hot air through the rear of the helmet to help cool you down when you're breaking a sweat. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Lightweight Design Built 29% lighter and with 90g less plastic than the Lazer Bullet 2.0 MIPS, its streamlined design is built more sustainably with a reduced carbon footprint while sparing no expense in performance.

The Nutcase Street Helmet collection combines the industry leading safety feature MIPS with original Nutcase inspiring designs. Featuring an improved retention system to provide a secure, comfortable fit and 2x the reflectivity for visibility on the road. 11 air vents increase the airflow to keep your brain cool and creative designs to keep you looking even cooler. - Equipped with MIPS (Multi-directional Impact Protection System) designed to reduce rotational forces that can result from certain impacts - High performing injection molded ABS shell and tuned EPS foam to keep you safe on the road - Improved ventilation to keep you cool - Premium Fidlock magnetic closure for one handed snap and go buckle - 3 piece internal heat sealed pads to provide next to brain comfort - Simple dial adjustable fit system provides safety, individualized fit and comfort - 2x reflectivity for increased visibility on the road - Eleven vents with internal channels in EPS for ventilation - Visor Included - CPSC 16 CFR 1203 and ASTM F1492 certified for cycling, scooting, and skating

One helmet all road. The MET Allroad Mips is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Sporty on one side, comfy on the other. It's exceptionally lightweight and secure thanks to MET's distinguishing design. Perfect for your next bikepacking adventure. Featuring the MIPS-C2 brain protection system, the MET Allroad Mips is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - MIPS-C2 Brain Protection System - Snap in/out visor - Safe-T E-DUO Fit System - Vertical adjustment and ponytail-compatible - Integrated rear LED light - Reflective rear stickers - Internal air-channeling - Hand washable comfort pads - Adjustable cam divider - Certifications: CE; AS/NZS

The MET Trenta 3K Carbon Mips® is a high performance road helmet designed with elite cyclists and worn to victory at Le Tour de France and the monuments of Liège-Bastogne-Liège and Il Lombardia. Engineered to keep your head fresh and save you energy with every pedal stroke, the MET Trenta 3K Carbon Mips® is the most advanced road cycling helmet we have ever made, now upgraded with the addition of Mips AIR®, the lightest and most advanced rotational management system.

The Speedframe Pro Blocked Helmet has earned Virginia Tech’s best rating (5 STARS) in its Bicycle Helmet Ratings program. Designed with input from our pro mountain bike athletes, this top-tier open-face mountain bike helmet offers a market-leading feature set. Top of that list is MIPS, which is designed to reduce rotational motion and redirect forces away from your brain should you crash. Dual-density Varizorb EPS bumps up that impact protection even further by spreading forces of impact across a wider area. The 360-degree fit system and Fidlock SNAP helmet buckle ensure a perfect fit every time you ride, and the buckle is a cinch to operate, even with gloves on. The XT2 liner is antimicrobial and manages odor while wicking moisture away from the head, and once it gets a little stinky, is easily removed and washed. Goggles pair well with the Speedframe Pro Blocked Helmet too, thanks to the 3-position adjustable visor. If you’re looking for a performance-minded trail helmet, congratulations—you just found your new lid. - MIPS added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360° Fit System allows you to dial in your perfect fit every ride - Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel

Designed with input from our pro mountain bike athletes, the Speedframe Pro Helmet has earned Virginia Tech#s best rating (5 STARS) in its Bicycle Helmet Ratings program for a reason. This top-tier open-face mountain bike helmet offers a market-leading feature set to keep you protected every time you hit the trails. Top of that list is Mips, designed to reduce rotational motion and redirect forces away from your brain should you crash. Dual-density Varizorb# EPS bumps up that impact protection further by spreading forces of impact across a wider area. The 360-degree fit system and Fidlock SNAP helmet buckle ensure a perfect fit every time you ride, with a buckle that's a cinch to open and close, even with gloves on. The XT2 liner is antimicrobial and manages odor while wicking moisture away from the head, and is easily removed and washed should it need it. Goggles pair well with the Speedframe Pro Helmet too, thanks to the 3-position adjustable visor. If you're looking for a performance-minded trail helmet, congratulations#you just found your new lid.

The MET Terranova MIPS is designed for trail and eMTB riding. The construction and fit are inspired by MET's Roam helmet, guaranteeing optimal comfort. The increased head coverage ensures a higher level of protection around the two most sensitive brain areas: the back and the temples. Featuring the MIPS-C2 brain protection system, the Terranova is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The tool-free adjustable visor is injection-molded to flex and bend when there is an impact against it. This unique feature helps to manage extra rotational forces transferred to your neck in a crash. The Terranova MIPS also features two dedicated ports to securely dock sunglasses while climbing or resting. The 360° head belt in the MET Safe-T DUO retention system ensures that there will be no pressure points on the skull and makes the helmet perfectly stable on the head while riding on rugged terrains. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T DUO Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Sunglass ports to securely dock sunglasses when climbing or resting - Exceptionally comfortable and secure on the head thanks to refined internal shape - 17 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

With features like integrated MIPS and an easy Ergo Fit dial, the Nomad 2 MIPS represents what bicycling is really about: the freedom of getting on your bike and exploring. Ride Confident The Nomad 2 MIPS meets any aspiring trail rider's needs without compromising fit, function, style, or safety. With our Ergo Fit adjustment system and upgraded padding for all-day support, the Nomad 2 with Integrated MIPS delivers exceptional comfort mile after mile. The trail-specific fusion in-mold polycarbonate shell offers low coverage and is MIPS-equipped for a safe and confident ride. The trails are waiting, and with the Nomad 2 MIPS you have no excuse but to go. Where to first? [Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.] - INTEGRATED MIPS—Integrated MIPS (Multi-Directional Impact Protection System) is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the retention system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - ERGO FIT—A lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS). - NO-TWIST TRI-GLIDES—Quick-adjust fasteners that help keep straps flat and properly positioned Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

As pioneers of removable chin bar technology, we have a legacy to uphold and overcome. We designed the Super Air R from the ground up to push the boundaries of performance and versatility. With class-leading Flex Spherical MIPS technology, superior ventilation, a total weight that is 22% or 144 grams lighter than its predecessor and an easy 2-click removable chin bar, this is a true all-mountain performer. - 18 vents, 8 chin bar vents, 4 brow ports - Overbrow ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation - Compliance: CPSC bicycle - Flex spherical + MIPS - comprehensive energy management - flex spherical enhances our ability to address high-speed impacts, low-speed impacts, as well as rotational impacts. Think of it as comprehensive protection, with the added bonus of being able to design better helmet ventilation.. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Progressive layering: the process of engineering a helmet liner with variable EPS foam densities to better manage the transfer of energies after some impacts - Goggleguide adjustable visor accommodates both goggles and glasses - Fit System: Float fit - a minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments (integrated with MIPS) - X-static padding - quick-drying materials, woven with real silver fibers, inhibit growth of odor-causing bacteria and fungi - Retention System: No-twist tri-glides: quick-adjust fasteners that help keep straps flat and properly positioned - Interior: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear - Safety: Wraparound chin bar - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm

The Lupo KinetiCore makes any rider look good while tackling the singletrack. A trail riding legend, this helmet features an integrated visor, increased ventilation and protection, and an easy-to-adjust fit. Features: - Integrated Visor: More than just a pretty piece, the integrated visor on the Lupo stays put when you’re moving fast and doesn’t snap off easily when you come to a stop too quickly. - Guaranteed to Fit: “One size fits all” is now reality. We designed the sweet-looking visor, helmet shell and fit system to accommodate a wide variety of head sizes and shapes. - Eyewear Friendly: We removed plastic to make space for your shades, leaving a comfortable spot to park those sunglass arms. Because a good riding day in the sun shouldn’t hurt your head. - LED light compatible: Increase visibility by attaching the Universal Lazer LED to the mount at the back of the helmet. - Winter Kit compatible: For those brisk winter rides, add the soft fleece Winter Kit for a cold weather conversion that keeps you powering through all year round. (Kit not included with helmet.) - More Protection. Less Plastic: Lazer KinetiCore is the world’s first responsibly designed and fully integrated impact protection technology, and still saves up to 12.82% plastic in the construction process. - 5-star protection rating: This helmet scores an esteemed 5-star protection rating from Virginia Tech. 5-star indicates the “Best Available” rating possible. - Head circumference in CM : Unisize 54 - 61

Key Features: - Mips® equipped - BOA® Fit System to fine-tune your fit - FIDLOCK® SNAP magnetic buckle for quick and secure operation - Integrated sunglasses holder Versatile, lightweight trail helmet The all-new Crossframe Pro Helmet is bred for elevated heart rates, ?at-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® and BOA®, this helmet is ready for any trail that you are. Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and - redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - FIDLOCK® SNAP helmet buckle provides quick and secure entry and exit, even while wearing gloves - Strap divider adjustment for repositioning the angle of the chinstrap - Removable, washable Ionic+® liner is anti-microbial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - BOA® Fit System with micro-adjustability allows you to fine-tune your fit on the fly - Rear cradle adjustment for setting the BOA dial to an ideal position - TPU vent inserts to keep your sunglasses securely stored when not in use

Proven MIPS coverage for superior open-face performance The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS™ liner, goggle-compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face mountain bike helmets. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready mtb helmets in the market today. - Proven MIPS™ impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle-compatible 3-position adjustable visor - 360 fit system allows you to dial in your perfect fit every ride - Weight: 360 g, medium CERTIFICATIONS: - CPSC - EN 1078 - AS/NZS 2063

FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle

The MET Hooray MIPS Helmet is safe, comfortable and has plenty of toddler-specific features that will protect the next generation of cyclists. The shell of the MET Hooray MIPS has a purposely flattened part at the back in order to be comfortable in any child seat. It also covers a large part of the two most sensible brain areas; the back and the temples. The internal shape features an engineered air channeling system to facilitate airflow, while MET's unique Bimbi Secure Technology ensures that there's no pressure points on the fontanel. Thanks to the new MET Safe-T Bimbo, the helmet will grow with the child's head. The retention system is easily adjustable due to the grippy nub, and the 360° head belt ensures a stable and secure fit. The ratchet buckle makes it easy to secure the helmet and avoid unexpected pinches on the skin. - In-mold polycarbonate shell with EPS liner - Extended head coverage and integrated visor for all-round head protection - MIPS-C2 rotational management system to increase protection against certain impacts - Fontanel protection thanks to MET Bimbi Secure Technology - Anti-pinch ratchet buckle makes it easier to secure the helmet - Internal engineered air channeling system features 10 vents to improve ventilation and comfort - MET Rear LED Light, 4 Spotlights, 60h Life - Reflective rear decal to enhance visibility - Design compatible with child-seat - MET Safe-T Bimbo Fit System with 360° head belt to follow the growth of the child - Straps with adjustable dividers ensure a custom fit - Anti-insect net embedded into the front vents - Hand washable comfort pads - Intended Age: 6-8 Years of Age Sizing: - X-Small = 46 – 52cm - Small = 52 – 55cm

Bell Transfer 9 Visor: Replace your lost, broken or worn-out visor with a genuine Bell replacement part designed to fit almost every Bell helmet. Order the Bell visor for your specific Bell helmet. The genuine Bell visor fits just like the original but may or may not have highlighted Bell logo. This replacement Bell visor helps to keep the sun and branches out of your eyes as you travel the roads or tear up the trails. NOTE: The visor does not include mount bolts.

- Shell is constructed with ABS - Multiple air vents for optimal ventilation and cooling - Matte finish - Durable multi-colored graphics - Ultra-plush removable, sweat absorbing and washable padded inner liner - O'Neal Fidlock magnetic buckle (engineered in Germany) for easy, single-handed fastening and release, provides maximum security while riding - Goggles rest securely in place on ridge at back of shell - Pre-installed with plastic break-away visor screws for improved safety in terms of crashing - Height adjustable visor - Airflaps compatible - Exceeds EN1078 safety standard for bicycle Helmets

- Replacement padding for Lumos Matrix and Street helmets

The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. WEIGHT: 280g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Rollsys System (ARS) VENTILATION: 18 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: Optional Aeroshell Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Lazer Aeroshell compatible Multi use polycarbonate cover which fits over top of your helmet. It covers the front and side vents to protect your head from rain and cold or to gain an aerodynamic advantage. Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Rollsys System (ARS) Easily adjust your helmet's fit by using the thumbwheel on the top of the helmet. Lazer's unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of the head. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Well ventilated Carefully designed vents and internal channeling pull air into the helmet and across your head for increased airflow. Essential for performance and comfort during high temperatures and hard efforts.

A Big Hit With Young Shredders With a brand new, smaller size, Tremor Child keeps more kids smiling, from the biggest shredders to the smallest groms. Featuring some of the best technologies from our adult line, like In-Mold construction for reduced weight and enhanced durability, secure fit adjustments, the Tremor is ready for any ride. Features: - Removable visor - Quick-dry padding - Built-in bug net - Reflective decals Construction: - In-Mold polycarbonate shell with EPS liner Ventilation: - 18 Vent

The Oakley ARO5 Helmet sits squarely in the middle of Oakley's new three-tiered helmet offerings. In between the ultra-aero ARO7 and the more ventilated, lighter weight ARO3, the ARO5 strikes the middle ground for an improved aero profile that still provides modest ventilation for summer racing or riding. The inside of the ARO5 is just as striking as the outside, with BOA’s 360 degree fit system, MIPS Brain Protection, and a moisture-wicking brow pad. The BOA FS1-S is a height adjustable 360° design that delivers an exact fit,with a soft textile feel and flexibility, the TX1 Lace lies flat against the head, allowing for seamless eyewear integration. And when eyewear isn't necessary, the front vents allow for secure storage that keeps the optics close at hand.

Bell's Span picks up where the Local left off, offering kids a modern twist on skate and BMX style. The fit is tight and right, and with a dial-adjustable fit system, this thing is staying put, no matter how rad you get. - Construction: ABS hard plastic shell with EPS liner - Number Of Vents: 10 - Fit System: Action Fit - Designed for street and skate helmets, this streamlined fit system offers an adjustable, secure fit with the turn of a dial -Weight: 423 grams (size S)

- Compass fit - 11 vents with increased air flow - Compatible with click-mount light - Lightweight - Integrated brim - Lay flat strap dividers - Compression molded pads - Light & durable dual shell - Snowsport knit compatible - Average weight: 350g Sizing: - Small = 52 – 55.5cm - Medium = 55.5 – 59cm

The Vanquish MIPS is the pinnacle of high-performance road cycling helmets, featuring the innovative TransformAir design that actively streamlines airflow to reduce drag. Inside the Vanquish is an EPS liner with progressive layering, and Giro's renowned RocLoc Air system seamlessly integrated with MIPS technology to enhance comfort and cooling power while providing an additional measure of protection. So whether you're hammering off the front, smashing an Ironman course, or laying down maximum wattage in the dash to the finish line, the Vanquish shapes the wind to work for you.

Classic good looks, lightweight design and 10 vents to keep the flow going, the Maha provides protection and excellent fit. - Anti-microbial pads - Locking sliders - ABS shell with EPS foam liner - Replaceable fit pads

OFF ROAD SECURITY The new Lazer Impala helmet is designed to elevate your riding experience, providing comfort and security while you ride and record. With extended shell coverage on all sides and EPS impact protection, it guarantees safety and peace of mind when riding, while keeping a low-fitting profile. The included action camera mount allows you to capture your experiences as they happen. A big adjustable visor protects you from sunlight, low-hanging branches and provides a space for goggle parking. A contrast color bottom shell is introduced to provide a clean finish and adds protection against wear and tear. The whole helmet is comfortable to wear thanks to the Advanced Turnfit System which provides 360 degree horizontal and vertical adjustments. Strategically placed inlet and exhaust vents keep your head cool when cranking out maximum effort. It even features brow vents to provide maximum frontal ventilation. Everything combines to provide a helmet that is at home everywhere and ready for all conditions. Ow yeah….and it looks GREAT! #DOWNFORIT - Increased protection - Internal ventilation channels - Large adjustable visor - Secure goggle parking - Premium features - Action camera mount - Advanced Turnfit system - MIPS layer - Fit System: ATS Advanced Turnfit System - Construction: In-Mold - Ventilation: 22 vents - Weight: 295g (S) - Certification: CE-CPSC-AS

OFF ROAD SECURITY The new Lazer Impala helmet is designed to elevate your riding experience, providing comfort and security while you ride and record. With extended shell coverage on all sides and EPS impact protection, it guarantees safety and peace of mind when riding, while keeping a low-fitting profile. The included action camera mount allows you to capture your experiences as they happen. A big adjustable visor protects you from sunlight, low-hanging branches and provides a space for goggle parking. A contrast color bottom shell is introduced to provide a clean finish and adds protection against wear and tear. The whole helmet is comfortable to wear thanks to the Advanced Turnfit System which provides 360 degree horizontal and vertical adjustments. Strategically placed inlet and exhaust vents keep your head cool when cranking out maximum effort. It even features brow vents to provide maximum frontal ventilation. Everything combines to provide a helmet that is at home everywhere and ready for all conditions. Ow yeah….and it looks GREAT! #DOWNFORIT - Increased protection - Internal ventilation channels - Large adjustable visor - Secure goggle parking - Premium features - Action camera mount - Advanced Turnfit system - MIPS layer - Fit System: ATS Advanced Turnfit System - Construction: In-Mold - Ventilation: 22 vents - Weight: 295g (S) - Certification: CE-CPSC-AS

The Lazer Coyote offers excellent ventilation and a solid fit so you can focus on what really matters: the trail. The Coyote offers a MIPS layer with deep protection and goggle compatibility to help protect your head whether you’re riding tech or flow. With twenty-one vents, this mountain bike helmet is designed to keep air flowing when you’re working your hardest. The generous open front perfectly fits your goggles and the molded shell keeps your strap in place. The integrated visor offers an extra layer of protection to keep things - like the sun and branches - out of your eyes. The TS+ fit system will keep you in the saddle longer, securing your helmet with a snug and comfortable fit. Deeper rear protection and a MIPS layer combine to give you extra confidence while shredding. Coyote MIPS has the Virginia Tech 4-star “Very Good” protection rating. For those long rides that use up all the daylight, the Coyote MIPS is compatible with the rechargeable rear TS+ LED light, to keep you visible on the pedal home.

Sleek styling, cool graphics, and youth-oriented sizing make the Shuffle Child LED helmet the perfect choice for your kids—day or night. - MIPS-equipped. - Integrated LED tail light for increased visibility in in both bright and low-light conditions. - Headset SX fit system with child-oriented sizing that's designed for an easy and accurate fit. - 4th Dimension Cooling System to optimize ventilation. - In-molded shell improves strength and reduces weight. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing for increased visibility in low-light conditions. - Stylish, youthful designs complement our bike graphics and colors. - Patented clip-on visor included.

The ideal companion on all-mountain and trail rides, the Trail Evo provides all-round protection with patented inmould technology due to direct fusion of the helmet shell to the internal EPS material. The numerous ventilation openings have been strategically angled and positioned to offer superior air circulation and a continuous cooling system. Precision interlocking "ErgoFit Ultra" allows you to adjust the fitting ring both vertically and circumference-wise, guaranteeing a precise and comfortable fit for any head. With the "QuickRelease" visor system, the visor can quickly detach in the event of a crash, preventing further damage or breakage both to the rider and visor. - Inmould technology, external and internal ventilation channels - Adjustable visor - Dial adjuster with precision interlocking - ErgoFit Ultra system for horizontal and vertical adjustment - Double-Inmould, 360° Inmould shell - Adjustable straps - EN1078, CPSC, KC

FOR MORE SAFETY The ABUS MoDrop MIPS can handle any terrain and any riding style and always leaves you wanting more. The mountain bike helmet is the best companion for big mountain days, experiences on the trail or just leisurely family outings. Equipped with our MTB-specific adjustment system and TriVider webbing distributors, this helmet offers many features that make it more comfortable to wear. The height-adjustable, visor-like visor protects you from hanging branches when riding downhill. In the event of a fall, it can also prevent direct impact with the face. Additional safety is provided by the MIPS impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider webbing distributor - Molded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - Ventilation: excellent ventilation for this helmet type due to 6 air inlets and 8 air outlets - Bug mesh: thorough protection against insects