Write a Review

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals

3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)

Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

BB90 is the Trek oversized bottom bracket standard and is only found on Trek road bikes. The shell is 90.5mm wide and is designed to work with 24mm spindles and road cranks and have the bearings inside the shell. The CeramicSpeed Bearings come as two bearings, which are then pressed into the frame. Those two bearings consist of either CeramicSpeed Standard or Coated Bearings. Both feature super smooth, super-round CeramicSpeed Balls contained in hardened-steel races. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. -BB90 is simple and light. The standard is designed to work with 24mm spindles. The bearings work with Shimano and other 24mm cranks, like FSA. - The CeramicSpeed Standard Bearings last at least 3 times longer than other bearings. That's thanks to hardened-steel races and CeramicSpeed Balls that are 100% smoother & 15% harder than the ceramic competition. These bearings have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to stock BBs. - The CeramicSpeed Coated Bearings reduce drag by 50% compared to Standard Bearings and an improvement in bearing life of 60%. In The Box: - 2 BB90 bearings - 2 seals - 2 dust covers with integrated spacers - 10ml syringe of All Round Grease - Sticker Sheet

CeramicSpeed T47/86 Bottom Bracket - SRAM DUB Road Black. The CeramicSpeed T47/86 bottom bracket offers bearings with extremely low friction improved power transfer and a service life that far exceeds traditional steel bearings.

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups. You have two bearing choices. The first choice is our low drag, long life Standard Bearing, with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. BB30 was designed to make the bike lighter: no cups, threading, or redundant metal, plus a lighter, stiffer crank. That's why the crank spindle is 30mm, which was a big jump up from square-taper spindles. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings. In The Box - 2x bearings - 2x 1mm spacers - 2x 0.5mm spacers - 2x dust covers - O-ring - 10ml syringe of grease - Sticker sheet

The CeramicSpeed Pulley Wheels for Shimano XT/XTR odders a unique symetrical 14-tooth narrow-wide design that provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. The increased pulley size, compared to stock, reduces chain friction. The pulleys have a lightweight machined alloy body for durability and long life, and are developed, designed and handbuilt in Denmark.

BSA is equivalent to English threading. English threading on MTBs mean a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearing types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. For MTBs, English threading, thanks to history, is pretty much the one threaded standard. It works great. 24mm spindles easily fit through the shell, allow for large bearings to be employed in the outside cups. What's more, they rarely creak and seal up well. Lots of things slow bikes down; bearings shouldn't be among them. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. The bearings last at least 3x longer than other bearings. Coated bearings have even less drag. These bearings come packed with LongLife Grease, best for muddy conditions. For less drag when riding in cleaner environs, you can coat the bearings with either All Round Grease or lowest drag TT and Track Grease, which is designed for clean conditions. In The Box - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of LongLife grease - Sticker sheet

BB30 Bottom Bracket for Shimano MTB BB30 central shells on mountain bikes call for a special threaded bottom bracket when installing Shimano cranks. Our Bottom Bracket threads into itself and holds the bearings outside the bottom bracket to work with Shimano. Our MTB bottom brackets are built with CeramicSpeed Coated bearings and equipped with UFO Long Life Grease for the ultimate in durability and protection in all environments. Technical Data This BB30 Bottom Bracket wotks with cranks that have 24mm thru-axle spindles. CeramicSpeed Coated Bearings typically have frictional drag of 0.3-0.4 watts per set. That represents an average 75% drag reduction compared to standard bottom brackets. The hardened-steel races feature the CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings drop friction further and increase lifespan. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. Performance can be improved by changing the grease. Long Life Grease comes installed, but can be changed for lower drag All Round Grease for lower drag or less messy conditions.

The OSPW X for SRAM Eagle Mechanical features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle XX1, X01, GX, NX Mechanical - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X system for SRAM Eagle Mechanical - CeramicSpeed Bearing Oil in a 15ml dropper bottle

The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. Details - Shorter insertion length to fit more bikes - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt quick-connect head - Remote sold separately

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.

Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon

The EC90 SLX is comprised of advanced carbon construction for Easton’s lightest road bar to-date. This handlebar features Easton’s new MCD shape technology for a unique ride quality and comfort. TaperWall technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 195-grams. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar’s designed recesses. - Bar weight: 195mm (42cm) - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC90 carbon

The E100 name is not used lightly and represents the culmination of nearly 20 years of creating the highest quality carbon components on the market. The new E100 road bar uses the same critically acclaimed Maximum Contact Drop (MCD) shape as our other premium road bars, with a stiff mid-section and long tails at the end of the drops for optimized ride characteristics and more hand positions. Most ultra-light bars sacrifice stiffness, durability and drop length to save weight, but not Easton's. The E100 bar meets the same rigorous fatigue and impact testing standards as our other road bars and does so as the lightest road bar Easton has ever created — a feathery 178g for a 42cm bar. - Finish: Matte UD Carbon/Ultra Gloss decals - Bar weight: 178g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm - Reach: 80mm - Drop: 125mm - Materials: E100 carbon

The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately

Just add sunshine and watch them grow. Electra's Sprocket 16" bikes are perfect for first time riders. Featuring Electra's signature style and quality as well as our patented Flat Foot Technology, kids will be riding until the street lights come on. Easy-to-remove training make this the perfect ride for kids ages 3 to 5 between 3' to 3' 10" tall. It's right for you if... You're looking for a well designed, quality bike for your little one that is built to last. These fun-sized bikes embody all of the energy, creativity, and explorative nature of being a kid. After all, the best memories are made on two wheels. The tech you get Comfort is key with Electra's Flat Foot Technology, Kraton grips, custom Selle Royal saddle, and front linear-pull brake with adjustable reach lever. Parents will love easy-to-remove training wheels, tires with Kevlar Guard casing to protect against flats and a rear coaster brake for a smooth stop. The final word There's almost no better feeling than watching your child ride their bike for the first time. And when you finally take the training wheels off? Forget about it. With Electra's legendary quality, style, comfort and control, the Sprocket will make your kid as happy as you are. Why you'll love it - Flat Foot Technology allows kids to sit upright and plant their feet flat on the ground without ever leaving the saddle, which means no tippy-toe stops and a wide view of the road so they can see what's coming. - Front alloy linear-pull brakes and a rear coaster brake with adjustable brake levers allow them to stop on a dime when they hear the ice cream truck. - Easy-to-remove training wheels that require no tools. - 16” tires with Kevlar Guard casing to protect against flats and keep them riding all day. - Designed as a universal, aluminum frame and built to last so this bike can be passed down to siblings. - Accessorize their new ride with a custom Electra bell or handlebar bag to carry all the necessities.

Boom! Kapow! Wham! Super Sprocket 16" is ready to help your little rider save the day on two wheels. This bike is like a page from their favorite comic book with action scenes and cityscapes throughout the frame, chainguard and fenders. Embossing on the saddle complete this heroic ride. - No tippy-toe stops and a wide view of the road so kids can see what's coming thanks to our patented Flat Foot Technology. - Front and rear linear-pull brakes allow them to stop on a dime when they hear the ice cream truck. - Puncture-resistant tires protect against flats to keep them riding all day while matching fenders add fashion and function. - The universal, aluminum frame is built to last making this the most desired hand-me-down. - Add a matching helmet and handlebar bag to keep them safe and carry all the necessities. Like juice boxes and snacks.

It's summer every day on the Tutti Frutti 16". Fresh, tropical fruit and popsicles adorn the Pink Lemonade frame while palms and flowers lay waiting to be picked up by a sea breeze. The playful design is carried throughout the fenders, chainguard and custom saddle, bringing the joy of summertime to every two-wheeled adventure! - No tippy-toe stops and a wide view of the road so kids can see what's coming thanks to our patented Flat Foot Technology. - Front and rear linear-pull brakes allow them to stop on a dime when they hear the ice cream truck. - Puncture-resistant tires protect against flats to keep them riding all day while matching fenders add fashion and function. - The universal, aluminum frame is built to last making this the most desired hand-me-down. - Add the matching Tutti Frutti helmet or handlebar bag to keep them safe and carry all the necessities. Like juice boxes and snacks.

The Cat's Meow 20" is sassy and stylin' just like your little rider. It features multi-color metallic leopard spots on the frame, fenders and chainguard. The pink metallic rims and a matching saddle and bell complete the look making this ride purrfect for any feline fanatic. - No tippy-toe stops and a wide view of the road so kids can see what's coming thanks to our patented Flat Foot Technology. - Front and rear linear-pull brakes allow them to stop on a dime when they hear the ice cream truck. - Kids grow and this bike will grow alongside them with adjustable pedal mount positions. - Puncture-resistant tires protect against flats to keep them riding all day while matching fenders add fashion and function. - The universal, aluminum frame is built to last making this the most desired hand-me-down. - Add the matching Cat's Meow handlebar bag to carry all the necessities. Like juice boxes and snac

EBC 3000 20" takes kids on a ride into the future. Robots wave "hello" as they busily tinker with the circuit board throughout the Space Dust frame, fenders and chainguard. Futuristic elements are carried throughout the custom debossed saddle and friendly robot bell. - No tippy-toe stops and a wide view of the road so kids can see what's coming thanks to our patented Flat Foot Technology. - Front and rear linear-pull brakes allow them to stop on a dime when they hear the ice cream truck. - Kids grow and this bike will grow alongside them with adjustable pedal mount positions. - Puncture-resistant tires protect against flats to keep them riding all day while matching fenders add fashion and function. - The universal, aluminum frame is built to last making this the most desired hand-me-down. - Add the matching EBC 3000 helmet and handlebar bag to keep them safe and carry all the necessities. Like juice boxes and snac

Outside is their best side. Electra’s Sprocket 20" bikes provide good old-fashioned fun in a good new-fashioned ride. Featuring Electra’s patented Flat Foot Technology, this bike is both comfortable and easy-to-ride. Designed to accommodate growth spurts, the Sprocket 20" is perfect for kids ages 5 to 8 between 3'8" to 4'5" tall. It's right for you if... You're looking for a well designed, quality bike for your little one that is built to last. These fun-sized bikes embody all of the energy, creativity and explorative nature of being a kid. After all, the best memories are made on two wheels. The tech you get Comfort is key with our Flat Foot Technology, Kraton grips, Selle Royal saddle and linear-pull brakes with adjustable reach levers. Dual position crank arms allow the bike to grow with kids and Schwalbe tires with Kevlar Guard® provide flat protection, so they can ride 'til the streetlights come on. The final word Remember riding to your friend’s house or the store? Or taking off for nowhere in particular? It was simple and fun. Remember fun? We do. Sprocket features Electra quality and style with patented comfort and control. So get 'em off the devices and get ‘em outside, because outside is their best side. Why you'll love it - No tippy-toe stops and a wide view of the road so kids can see what's coming thanks to our patented Flat Foot Technology. - Front and rear linear-pull brakes allow them to stop on a dime when they hear the ice cream truck. - Kids grow and this bike adapts with adjustable pedal mount positions. - Schwalbe Big Ben puncture-resistant tires with Kevlar Guard protect them against flats to keep them riding all day. - The universal, aluminum frame is built to last so this bike can be passed down to siblings. - Customize with an Electra bell or handlebar bag to carry all the necessities and make it their own.

Simply elegant. Casually cool. As a beach cruiser should be. You can feel the Electra difference with our patented Flat Foot Technology®, adding a whole new level of comfort and control. With a range of 7 gears and linear pull brakes, the Cruiser 7D is ready to roll. It's right for you if... You enjoy the causal ride of a beach cruiser, but still appreciate quality, craftsmanship, and of course, style. The Cruiser 7D is the best of both worlds, offering plenty of gears to give you range beyond a quick ride around the block in flip flops. Not that there’s anything wrong with that. The tech you get The Cruiser 7D features a lightweight, aluminum frame, Shimano 7-speed gearing with a Revo Twist shifter and alloy linear pull brakes. Electra's patented Flat Foot Technology® provides an upright ride for comfort and control with the added cushion of balloon tires. The final word For comfort and style, nothing compares to an Electra Cruiser. We changed the game by moving the pedals forward, relaxing the angle of the seat and opening up the entire frame geometry. Our Cruisers are simple, fun and easy to ride. All you need to do is choose your favorite color and apply sunscreen. Why you'll love it - Get the classic look of a beach cruiser with added details that take it to the next level. - Comfort and control are key with Electra's patented Flat Foot Technology®. - The linear pull brakes and 7-speed drivetrain give you range and stability. - Add a bell, basket or a surf rack to make the most of those long summer days.

This is your city. Ride like it. The Loft 7D is a lightweight commuter that puts the fun in functionality. 700c wheels and a foot-forward, upright riding position provide optimum speed, comfort and control. This modern-day classic is built to ride. It's lightweight. It's durable. It's comfortable and designed to handle the rigors of the streets. It's right for you if... You've got places to go. The Loft 7D is a reliable commuter that will get you there. This lightweight city bike won't break the bank and comes equipped with an alloy frame, 7-speed drivetrain and fenders to keep you dry. Explore the city's ups and downs while still looking stylish. The tech you get Designed with functional minimalism in mind, the clean lines and straight bars give it a nice, unaffected look. The Loft 7D features a lightweight but sturdy aluminum frame, Shimano 7-speed MEGARANGE gearing to tackle hills, alloy dual pivot caliper brakes and fast-rolling 700c wheels. The final word The Loft is a lightweight commuter bike that will go from apartment to espresso in two minutes flat. Big on fun, low on maintenance, this bike was made for the city and everything that comes with it. Nimble, lightweight and sure to turn heads, you'll always arrive in style on a Loft 7D. Why you'll love it - Choose the frame geometry that's right for you: step-over or step-thru, with a lower standover height for easy on and off maneuverability. - The foot-forward, upright riding position provide optimum speed, comfort and control. - Choose from a variety of colors. - Customize your Loft and make it your own. Add a front basket for storage, a bell so they hear you coming and cup holder for your morning coffee. - Top it off with an Electra helmet and arrive fashionably safe.

SUITO-T is the Elite Suito home trainer without supplied sprocket cassette, a powerful and compact model that offers total compatibility with several types of bicycle. Powerful, solid, and quiet, SUITO-T is an interactive home trainer designed to offer a realistic, accurate, and fun bicycle workout experience. Featuring direct transmission to ensure increased accuracy and quietness while working out, the SUITO-T is very stable trainer even during the most intense sprints, and its small size makes it easy to transport and store everywhere. What's the difference between a Suito and a Suito-T? - SUITO and SUITO-T are two identical home trainers, featuring the same technical specifications both in terms of structural and electronic features. - What separates them is the sprocket cassette, which is included in the Suito but not included in the SUITO-T. Compact design - The main feature of this home trainer is the sturdy steel structure, ideal to ensure durability and stability even during intense sprints. - Featuring an elegant and solid profile, SUITO-T has a wide support base with pre-assembled support legs. Just position them properly to trigger the automatic lock mechanism. - SUITO-T is designed to ensure a small footprint wherever you go: its integrated handle, reduced size, and slim profile makes it easy to transport and store everywhere without worrying about its footprint. - SUITO-T optimized design makes it compatible with various bicycle models and commercially available sprocket sets. Accurate and powerful bicycle workouts - SUITO-T simulates gradients up to 15% with ± 2.5% accuracy, one of the most powerful home trainers you can use to release all your power even during the most intense sprints. The following functions also contribute in displaying accurate workout data: - Power Meter Link (PML): It's a function that lets the home trainer employ an ergometer that's already installed on your bike as a power source. - Spindown: A calibration procedure for the home trainer that takes into account all friction values that change over time and during use that influence brake's accuracy and compensates its effects on the resistance generated by the home trainer. - Temperature compensation algorithm: A function that lets the home trainer compensate the variations due to brake overheating and take the resulting data into account when calculating power. Train on Zwift and My E-Training! - Discover all the software you can use with SUITO-T: other than Zwift and My E-Training, you can also manage it with all other indoor cycling platforms such as TrainerRoad, Kinomap, Rouvy, Bkool, Bikevo and many more. - SUITO-T adds up to the Elite home trainers' range of ANT+ FE-C & Bluetooth home trainers that interact with every app, software, computer and device (smartphones and tablets) via iOS, Android, MacOS and Windows. Just choose the software, select the course or training program and start pedaling on your bike. SUITO-T will automatically adjust resistance. Sensorless cadence - All home trainers by Elite immediately send power, speed, and cadence data, thus setting themselves as effective instruments to build an accurate training program and replicated outdoor workouts as much as possible. Cadence is measured via a practical sensorless technology (that is, no sensors to apply to your bicycle) and is calculated on the SUITO-T as a function of speed variations.

The Elite Direto XR-T is the home trainer you've been seeking for your indoor training this season. This trainer is the biggest evolution of the Elite Direto trainers, featuring an integrated power meter. It is ideal for reaching the highest level of performance and working out in a totally immersive home training experience. - Just like Suito, the Direto XR-T trainer will help you work out on your bike in the easiest and quickest fashion since the first unboxing. - Very stable, Direto XR-T folds quickly for storage when not in use and features a practical integrated handle that makes it easier to carry it with you. - The Direto XR-T is a direct-drive home trainer, meaning that it is one of the quietest home trainers on the market. Integrated power meter - The OTS (Optical Torque Sensor) ensures Direto XR-T the greatest data accuracy while you're training. This is an innovative integrated power meter for the home trainer to measure power output with to within 1.5% error, 0.5% less error tolerant than the original Direto trainer. - The Elite Direto XR-T is the only home trainer in the world, along with the original Drivo, Drivo II, Direto, and Direto X trainers, to actually measure your power output via an integrated power meter. That's why it sets itself apart as one of the most accurate home trainers on the market. Incredible slope simulation - The Direto XR-T is an interactive home trainer, so it automatically varies resistance during your training. With an upgraded and bigger flywheel, the Direto XR-T is able to simulate up to an incredible 24% slope gradient—10% more than what the original Direto could do and 6% more than the Direto X. - This unprecedented power level ensures excellent performances even during particularly intense training sessions—you'll be able the check out all your training charts at a glance, conduct tests to evaluate your fitness level, do reps and high-speed sprints at max power. - Any type of training you want is available to you riding on the Direto XR-T. Super compatible - The Elite Direto XR-T ensures total compatibility with both road and MTB bicycles, making it one of the most compatible trainer on the market. - This trainer features a new structure which is perfect to house derailleurs with long cages that feature greater capacity on bigger 12-speed sprocket sets. This is how the Direto XR-T is compatible with 9/10/11 speed Shimano/SRAM, 9/10/11/12 speed Campagnolo, 12 speed SRAM NX and 12 speed Shimano Micro Spline cassettes. Cassette sold separately. Total Interactivity - Direto XR-T is counted among the new generation of ANT+ FE-C & Bluetooth interactive home trainers that are compatible with any kind of app, software, computer, or device (smartphones and tablets) that support iOS, Android, OSX, or Windows. - Set your course or training programs with a few clicks and start pedaling right away. Direto XR-T will automatically adjust resistance and manage your training session. - Direto XR-T can be managed via the My E-Training software & app (12-month free subscription included) or other indoor cycling services, such as: Zwift, TrainerRoad, The Sufferfest, Bkool, Kinomap and many more.