Wheels

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

High-quality replacement hub bearings for Bontrager System Wheels. 30mm x 18mm x 7mm

These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal wheel magnets work with any speed sensor - Thread-on speed magnet is positioned closer to the sensor for improved signal - Aero speed magnet provides a sleek, low-profile, aerodynamic solution

Replacement clear plastic spoke guard.

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

- Replacement adjustable nut for three-speed internal hubs.

WHL RR 700 622x17 ALEX AT470 BK MSW 32 OR8 RD1100 8-11s CASS QR SEAL BK 130mm DTI2.0BK

-Replacement freehub body -Compatible with Bontrager Pro-level hubs -130/135mm O.L.D. -Shimano/SRAM MTB/Road 8/9/10-speed

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. Allows for easy installation on Rock Shox Torque Cap compatible forks Fits all 15mm thru axle 350 hubs as well as 1700 and 1900 series front wheels Does not fit QR hubs

DT Swiss X 1900 Spline 25 Rear Wheel - 29", 12 x 148mm, Center-Lock, HG 11 MTN, Black Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. - Tubeless ready, 25mm wide and light rim -Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape - Spline Hub with Ratchet LN 18T freehub drive system Specifications: Hub/Brake Compatibility: Center-Lock Disc Color: Black Wheel Size: 29" Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain ISO Diameter: 622 / road / 29" Valve: Presta Rim Width (Internal): 25 Defined Color: Black Tire Type: Tubeless Ready Clincher Rear Axle: 12mm Thru x 148mm

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps - Also used for 12 x 157mm, 12 x 177mm and 12 x 197mm spacing - End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps - fits 180, 240, 350, 440

The Reynolds AR58 rim brake carbon road bike wheels serve up excellent aerodynamic performance for road racing, time trials and triathlons. The optimized rim profile is remarkably stable in crosswinds and the tubeless ready 19mm rim channel is designed to accommodate wider tires for lowered rolling resistance and improved riding comfort. All for a reasonable price. Key Features: • Wide, Tubeless Ready Rim Provides Better Fit For Higher Volume Tires That Increase Grip, Lower Rolling Resistance And Provide Greater Comfort • Refined, Wider Rim Shapes Have Been Optimized For Crosswind Stability At A Variety Of Yaw Angles • Features Sapim Sprint Spokes With Brass Nipples • Premium Graphics Offer Ultra Clean And Subtle Appearance • Equipped With Fast Rolling And Smooth Reynolds Allroads Hubs Which Offer 10° Of Hub Engagement • Disc And Rim Brake Specific Models Available • Ctg2 Brake Track Is 30% More Resistant To Heat ThanOriginal Ctg Technology • Lifetime Warranty Specifications: Rim Material: Carbon Fiber Rim Size: 700c Rim Width: Internal 19mm, External 28mm Rim Depth: 58mm Rim Weight: 466g Hub: Reynolds - 10 degree engagement Spoke Count: 20 Front, 24 Rear Brake Interface: Disc Only, Center Lock Front Axle Spacing: 12x100 & 15x100 (Included), QR 100 (Available Separately) Rear Axle Spacing: 12x142 (Included), QR 135 & 12x135 (Available Separately) Freehub: Shimano/SRAM 9-11spd Wheelset Weight: 1700g

Industry Nine cartridge bearings are OE replacement bearings. Thickness: 5 Bearing O.D. (mm): 26 Bearing I.D. (mm): 17

Heavy duty and extra wide PVC rim strips for maximum tube protection.

- Fits all freewheel hubs - Will not fit Cassette hubs - Type: STD Plastic - Color: Clear

- Shell: 8mm flanged axle nut - Flanged

Replacement Axle nuts for three speed Sturmey Archer hubs.

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.

Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

- High-quality fat bike rim strips - Super durable PVC material

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.

You need rim tape to keep your tubes from blowing through the spoke holes, especially when landing big airs. WeThePeople's got your back, though. If your's is questionable, you better replace it with this WTP Nylon Rim Tape, a perfect fit with Logic Rims. - Strong - Lightweight - Tube-proof

Our 2Bliss Ready Rim Strips create a secure barrier from sealant to rim in a clean simple to install strip. Riders running 2Bliss can now change tires quicker and easier than with any other tubeless system.

Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types. - Easily snaps over your rims - Stretchy, tightly woven material provides a close fit and protects from abrasion - Sold as a pair - Not for tubeless set up

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. - Tubeless ready, 25mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape Specifications: Hub/Brake Compatibility: Center-Lock Disc Color: Black Wheel Size: 29" ISO Diameter: 622 / road / 29" Front Axle: 15mm Thru x 110mm Valve: Presta Rim Width (Internal): 25 Defined Color: Black Tire Type: Tubeless Ready Clincher

Various road surfaces or weather conditions cannot deter you: the endurance-specific ERC 1100 wheels enable you to ride fast and stable. With AERO+ optimized rim profiles, wider and more comfortable tires are better supported. Ultra low-friction SINC Ceramic bearings inside DICUT Aero hubs and the latest generation of DT Swiss aero spokes are technical highlights inside the wheels. The proven Ratchet EXP freehub system with its 36T Ratchets transfers each pedal stroke precisely into forward propulsion and speed – from the start right to the finish of your ride Aero-optimized wheels with Carbon rim supports your ride on different road profiles. Whether you enjoy an easier longer climb or the following smooth descend, riding will feel almost effortless DiCut aero 180 hub with 36t SL Ratchet System, SINC ceramic bearings, Shimano Road and SRAM XDR Road freehub body kits T-head spokes are built with a 2-cross pattern Includes tubeless tape, tubeless valve and refill kit, 6-bolt adapter, valve guard, QR end caps and wheel bag Wheel Size: 700c ISO Diameter: 622 / road / 700c Hub/Brake Compatibility: Center-Lock Disc, 6-Bolt Disc Cassette Body Type: Shimano/SRAM 11 Speed Road, SRAM XDR Valve: Presta Rim Width (Internal): 22mm Tire Type: Tubeless Ready Clincher Front Axle: 12 x 100mm TA Rear Axle: 10 x 135mm QR, 12 x 142mm TA Color: Black

Replacement bearing for rear driveside on Spline 1200, 2nd generation 1501 and DiCut disc wheels Genuine DT Swiss replacement - steel bearings, 240 quality Sold individually Model: 1526 Fit: Various hubs I.D.: 15mm O.D.: 26mm Width: 7mm Weight: 11.2g

Replacement parts for Enve hubs.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. 135mm x 12mm thru axle end cap kit for DT 240, 350 and 440 hubs with XD Driver for SRAM 11-speed cassette

Part no. T-2203 | Replacement parts for T-2000 series trainers. Fits behind resistance unit yoke and is held in place by the roller tension knob.

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.

- Press fit designed to work the hub's non-drive side collar.

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

- Replacement rear skewer - Spacing: 135mm - Material: Steel

The Stolen rim strip features 30mm width and 20" diameter. - Material: PVC - Wheel Size: 20" - Rim Strip Width (mm): 30 mm - Adhesive: No

- Eady to install - Spoke mounted - 2 per set

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

Replacement axle nuts Use: 3/8x26T-Rr Size: Flanged

Replaceable hub guard for the Odyssey Vandero Pro and GSport Roloway front hubs. Made from a special proprietary plastic blend for increased durability. Sold individually. Features: - Proprietary Plastic - Press Fit

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Parts for repair and maintenance of DT Swiss hubs.

ABI Standard Design Cartridge Bearings. 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed Specs: -Thickness: 9 -Material: Steel -Bearing O.D. (mm): 30 -Manufacturer Number: 6200 -Bearing I.D. (mm): 10

Replacement indicator chain for three speed Sturmey Archer hubs.

Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

12x119mm - This axle is specifically designed to only replace front Mavic Speed Release thru axles. The thread, a “double lead-in” thread, is proprietary to the Mavic Speed Release system only. 12x165mm - This axle is specifically designed to only replace rear Mavic Speed Release thru axles. With a special thread, a “double lead-in” thread, this axle is proprietary to the Mavic Speed Release system only.

Wheel Factory hand built versatile wheels DT Swiss XM 481 rims Offer industry leading Trail and Enduro performance 30mm internal width is ideal for tires between 2.3" - 2.8" Industry 9's top of the line Hydra hubs feature 6-pawl, 6-phase, 115-tooth drive ring with .52 deg between engagement points Built with DT Swiss Competition double butted spokes (2.0/1.8/2.0) and brass DT Swiss Squorx nipples Hand laced and trued in the USA

A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers.