Write a Review

Deore M4100/MT420 offers powerful, intuitive braking that is easy to reach so you can keep the rubber side down. Cascaded technology from XTR to XT to SLX makes the Deore M4100 brake an excellent choice for all riders, especially new riders. With I-SPEC EV clamp bands providing an additional contact point for a stiffer brake lever, 2-finger lever position, and powerful four-piston MT420 calipers, Deore M4100 is a winner.

- 2-PIECE CRANKSET for 142 mm or 148 mm O.L.D. frames -DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 172 mm - Direct mount chainring - Chain Line 52 mm - 1x12-speed TL-FC41 Not Included

• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation

• Lightweight seal structure removes grams • Durable anodized finish • Includes left and right hand cups, spacers, inner cover, and inner o-rings • Easy installation with TL-FC25 tool • Compatible with 24mm crank spindles • English, threaded: 68/73mm bottom bracket • Pressfit: BB86/92 bottom brackets

The Shimano Deore XT FC-M8120 crankset features modern construction using direct mount chainrings and a 178mm Q-factor for 12-speed MTB drivetrains. Hollow forged crank maximizes power transfer while limiting weight Rigid and lightweight design for aggressive trail riding Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance. 178mm Q-factor 55mm chainline TL-FC41 Tool not included Chainring Not Included

Shimano XT CRM80 1x11 Chainrings - Hollow gear construction for optimized rigidity, weight, and rigidity - Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body - Dyna-Sys11 HG-X11 11-speed chain compatible - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Steel/Carbon - Ring Position/Type: Chain Retaining Single Ring - Tooth Count: 30

- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Low Profile Rear Derailleur Design - Shimano Shadow Rd - Race Endurance For Less Damage In Crush - Maintains Compact And Smooth Appearance - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T

The uninterrupted shifting experience of the Shimano Dura-Ace R9200 12-speed cassette range lets you climb, sprint, and push your limits without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range. - Faster, seamless shifts under maximum pedaling load - Refined 12 step gear combination provides peak efficiency and accelerating performance for every situation - Compatible with 12-speed and road 11-speed freehub body

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting. - Fast Di2 shifting performance - Smaller, sleeker, lighter - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-55t - 61-66 degree chainstay angle - Includes 1 SD300 port

Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets

Shimano's R9100 series crank arm achieves the ultimate in optimal power transfer. It does this through a broad Hollowtech II arm which sets the highest standards for stiffness and lightness. - Spindle Interface Type: Hollowtech II

Shimano Dura-Ace ST-R9250 dual control levers are the ultimate in reliable performance thanks to a wired connection to the rim brakes. Refined ergonomics and advanced materials show the race pedigree of these levers. - Quick and intuitive 12-speed Di2 shifting - Clearly defined click feeling with ergonomic shifting lever - Better bike control and confidence in race conditions - Hood shape and texture optimize grip and brake power transmission

Featuring Servo Wave Action brake technology, the Shimano Dura-Ace ST-R9270 brake lever delivers modulation and control like never before. Wireless shifting keeps your bike looking clean while offering the fastest, most precise gear changes available. All of this resides in a dual control lever that employs the most advanced materials to offer lightweight and refined ergonomics that provide comfort and control for the most demanding conditions. - The wireless connection provides a clean cockpit, enhancing the aesthetic of your bike while keeping shifting lightning fast - 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries - Unparalleled ergonomics engineering refined with pro rider feedback - Raised hood peak improves ergonomics, while a longer hood body increases hand support - Compatible with satellite shifters - Servo-Wave technology optimizes brake control - Lighter, smoother lever action - Enhanced modulation thanks to an expanded braking control area - Carbon fiber brake lever and titanium hardware

The ergonomics on the Shimano Dura-Ace ST-R9270 dual control levers bring new levels comfort and control to road cycling. With fast wireless shifting and precise brake modulation, Dura-Ace redefines performance. The Dura-Ace BR-R9270 hydraulic 2-piston calipers are sleek and compact. Mono-body construction ensures light weight and rigidity, proving that good things can come in small packages. The wireless connection provides a clean cockpit, enhancing the aesthetic of your bike while keeping shifting lightning fast 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries Wider pad clearance decreases the chance of rotor rub Raised hood peak improves ergonomics, while a longer hood body increases hand support Compatible with satellite shifters Maintenance-friendly bleeding process

Shimano EW-JC302 Di2 Junction Box - 2 Ports, Use With EW-SD300 Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions

Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

The Shimano 105 FC-RS520 is a 2-piece, 4-arm crank that's compatible with modern disc brake road frames. 4-arm crankset for 12-speed drivetrain. Compatible with frames of O.L.D. 135mm and 410mm chainstay length. 44.5mm chainline. 150mm Q-factor. Compatible with HG 12-speed chains.

Shimano HG-800 11-speed cassette. - High-performance gear combinations provide superior rider choice - With hub body for MTB to fit a variety of bikes from MTB to road - Average Weight: 335 grams

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

An attractive aluminum crank with hollow arms for lightweight, rigidity, and durability The newly designed crank arms offer an optimized balance between lightweight and efficiency. The crank, formed with hollow aluminum technology, is anodized with a beautiful gloss black anodized finish, giving it a luxurious look. The resin ribs on the back of the chainrings are SHIMANO 105's unique structural design that achieves both thorough weight reduction and crisp shifting performance. FEATURES - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWTECH II structure cuts weight yet maintains strength for better power transfer - Crank arm length: 160, 165, 170, 172.5, 175 mm - Gear combination: 50-34T, 52-36T - Q-factor: 148 mm

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7100 2-piston caliper provides lightweight braking performance and is combined with quicker piston retraction. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup

The Shimano SLX CS-M7100 12-speed cassette is optimized with rider-tuned gear combinations for MTB excellence. - Advanced shifting performance provides the confidence to enjoy any trail - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - HYPERGLIDE+ technology provides better chain engagement, stronger retention, and smoother pedaling with greater power and confidence over rapidly changing terrain - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - The CS-M7100 cassette meets durability requirements for E-MTB applications - Cassette Body Type: Shimano Micro Spline - Drivetrain Speeds: 12 - Range: 10-45 - Designed for ebike: Yes - Color: Silver/Black - Defined Color: Silver

The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range. - Advanced shifting performance provides the confidence to enjoy any trail - Fast and shockless shifting - Hyperglide+ - Extra wide range 12-speed drivetrain -10-51T (12-speed) - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - New bumper added to rear derailleur pulley cage - Bump Stopper - Bigger 13T pulley - Stable drivetrain on rough terrain - Low-profile design - Shimano Shadow RD+

- Ergonomically Designed For Reduced Shifting Effort - Consistently Stable Shifting - Easy To Install, Compact Design And Slim Brake Lever For Lightweight - Simple, Adaptable Cockpit - 20% Lighter Rear Shifts - Includes cables and housing

SLX SM-RT70 Center Lock rotors deliver powerful and consistent braking performance in all riding conditions. They feature a 3-layer structure (an aluminum core paired with two stainless steel outer layers) that reduces rotor surface temperatures approximately 100 degrees Celsius compared to all-steel rotors. - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm hubs (sold separately)

- Series: SORA - Shift Lever Type: STI - Front Shifting: 2 or 3 - Rear Shifting: 9-speed - Shift Cable Casing: OT-SP41 - Adjustable Reach: Yes - Brake Lever Actuation: Short Pull Super SLR - Cassette Spacing: Shimano/SRAM 9 - Color: Black