Write a Review

Deore M4100/MT420 offers powerful, intuitive braking that is easy to reach so you can keep the rubber side down. Cascaded technology from XTR to XT to SLX makes the Deore M4100 brake an excellent choice for all riders, especially new riders. With I-SPEC EV clamp bands providing an additional contact point for a stiffer brake lever, 2-finger lever position, and powerful four-piston MT420 calipers, Deore M4100 is a winner.

- 2-PIECE CRANKSET for 142 mm or 148 mm O.L.D. frames -DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 172 mm - Direct mount chainring - Chain Line 52 mm - 1x12-speed TL-FC41 Not Included

• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation

• Lightweight seal structure removes grams • Durable anodized finish • Includes left and right hand cups, spacers, inner cover, and inner o-rings • Easy installation with TL-FC25 tool • Compatible with 24mm crank spindles • English, threaded: 68/73mm bottom bracket • Pressfit: BB86/92 bottom brackets

The Shimano Deore XT FC-M8120 crankset features modern construction using direct mount chainrings and a 178mm Q-factor for 12-speed MTB drivetrains. Hollow forged crank maximizes power transfer while limiting weight Rigid and lightweight design for aggressive trail riding Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance. 178mm Q-factor 55mm chainline TL-FC41 Tool not included Chainring Not Included

Shimano XT CRM80 1x11 Chainrings - Hollow gear construction for optimized rigidity, weight, and rigidity - Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body - Dyna-Sys11 HG-X11 11-speed chain compatible - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Steel/Carbon - Ring Position/Type: Chain Retaining Single Ring - Tooth Count: 30

- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Low Profile Rear Derailleur Design - Shimano Shadow Rd - Race Endurance For Less Damage In Crush - Maintains Compact And Smooth Appearance - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T

The uninterrupted shifting experience of the Shimano Dura-Ace R9200 12-speed cassette range lets you climb, sprint, and push your limits without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range. - Faster, seamless shifts under maximum pedaling load - Refined 12 step gear combination provides peak efficiency and accelerating performance for every situation - Compatible with 12-speed and road 11-speed freehub body

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting. - Fast Di2 shifting performance - Smaller, sleeker, lighter - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-55t - 61-66 degree chainstay angle - Includes 1 SD300 port

Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets

Shimano's R9100 series crank arm achieves the ultimate in optimal power transfer. It does this through a broad Hollowtech II arm which sets the highest standards for stiffness and lightness. - Spindle Interface Type: Hollowtech II

Shimano Dura-Ace ST-R9250 dual control levers are the ultimate in reliable performance thanks to a wired connection to the rim brakes. Refined ergonomics and advanced materials show the race pedigree of these levers. - Quick and intuitive 12-speed Di2 shifting - Clearly defined click feeling with ergonomic shifting lever - Better bike control and confidence in race conditions - Hood shape and texture optimize grip and brake power transmission

Featuring Servo Wave Action brake technology, the Shimano Dura-Ace ST-R9270 brake lever delivers modulation and control like never before. Wireless shifting keeps your bike looking clean while offering the fastest, most precise gear changes available. All of this resides in a dual control lever that employs the most advanced materials to offer lightweight and refined ergonomics that provide comfort and control for the most demanding conditions. - The wireless connection provides a clean cockpit, enhancing the aesthetic of your bike while keeping shifting lightning fast - 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries - Unparalleled ergonomics engineering refined with pro rider feedback - Raised hood peak improves ergonomics, while a longer hood body increases hand support - Compatible with satellite shifters - Servo-Wave technology optimizes brake control - Lighter, smoother lever action - Enhanced modulation thanks to an expanded braking control area - Carbon fiber brake lever and titanium hardware

The ergonomics on the Shimano Dura-Ace ST-R9270 dual control levers bring new levels comfort and control to road cycling. With fast wireless shifting and precise brake modulation, Dura-Ace redefines performance. The Dura-Ace BR-R9270 hydraulic 2-piston calipers are sleek and compact. Mono-body construction ensures light weight and rigidity, proving that good things can come in small packages. The wireless connection provides a clean cockpit, enhancing the aesthetic of your bike while keeping shifting lightning fast 1.5 to 2 years of battery life with easy-to-change CR1632 shifter batteries Wider pad clearance decreases the chance of rotor rub Raised hood peak improves ergonomics, while a longer hood body increases hand support Compatible with satellite shifters Maintenance-friendly bleeding process

Shimano EW-JC302 Di2 Junction Box - 2 Ports, Use With EW-SD300 Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions

Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

The Shimano 105 FC-RS520 is a 2-piece, 4-arm crank that's compatible with modern disc brake road frames. 4-arm crankset for 12-speed drivetrain. Compatible with frames of O.L.D. 135mm and 410mm chainstay length. 44.5mm chainline. 150mm Q-factor. Compatible with HG 12-speed chains.

Shimano HG-800 11-speed cassette. - High-performance gear combinations provide superior rider choice - With hub body for MTB to fit a variety of bikes from MTB to road - Average Weight: 335 grams

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

An attractive aluminum crank with hollow arms for lightweight, rigidity, and durability The newly designed crank arms offer an optimized balance between lightweight and efficiency. The crank, formed with hollow aluminum technology, is anodized with a beautiful gloss black anodized finish, giving it a luxurious look. The resin ribs on the back of the chainrings are SHIMANO 105's unique structural design that achieves both thorough weight reduction and crisp shifting performance. FEATURES - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWTECH II structure cuts weight yet maintains strength for better power transfer - Crank arm length: 160, 165, 170, 172.5, 175 mm - Gear combination: 50-34T, 52-36T - Q-factor: 148 mm

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7100 2-piston caliper provides lightweight braking performance and is combined with quicker piston retraction. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup

The Shimano SLX CS-M7100 12-speed cassette is optimized with rider-tuned gear combinations for MTB excellence. - Advanced shifting performance provides the confidence to enjoy any trail - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - HYPERGLIDE+ technology provides better chain engagement, stronger retention, and smoother pedaling with greater power and confidence over rapidly changing terrain - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - The CS-M7100 cassette meets durability requirements for E-MTB applications - Cassette Body Type: Shimano Micro Spline - Drivetrain Speeds: 12 - Range: 10-45 - Designed for ebike: Yes - Color: Silver/Black - Defined Color: Silver

The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range. - Advanced shifting performance provides the confidence to enjoy any trail - Fast and shockless shifting - Hyperglide+ - Extra wide range 12-speed drivetrain -10-51T (12-speed) - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - New bumper added to rear derailleur pulley cage - Bump Stopper - Bigger 13T pulley - Stable drivetrain on rough terrain - Low-profile design - Shimano Shadow RD+

- Ergonomically Designed For Reduced Shifting Effort - Consistently Stable Shifting - Easy To Install, Compact Design And Slim Brake Lever For Lightweight - Simple, Adaptable Cockpit - 20% Lighter Rear Shifts - Includes cables and housing

SLX SM-RT70 Center Lock rotors deliver powerful and consistent braking performance in all riding conditions. They feature a 3-layer structure (an aluminum core paired with two stainless steel outer layers) that reduces rotor surface temperatures approximately 100 degrees Celsius compared to all-steel rotors. - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm hubs (sold separately)

- Series: SORA - Shift Lever Type: STI - Front Shifting: 2 or 3 - Rear Shifting: 9-speed - Shift Cable Casing: OT-SP41 - Adjustable Reach: Yes - Brake Lever Actuation: Short Pull Super SLR - Cassette Spacing: Shimano/SRAM 9 - Color: Black

9-Speed compatible Optical Gear Display Trigger shifters clamp to handlebar COLOR: Gray FRONT/REAR/PAIR: Pair

Shimano Sprinter Switches RS-801 Short 100mm for Remote Sprinter Switch Long 260mm for Top Bar

Shimano CS-HG200 7/8/9-Speed Cassettes HYPERGLIDE technology for reliable shifting performance Zinc Phosphate plated cogs Color: Black Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed Drivetrain Speeds: 9 Defined Color: Black Cassette Cogs: 11-13-15-17-20-23-26-30-34 Range: 11-34

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

The uninterrupted shifting experience of the Shimano Ultegra CS-R8100 12-speed cassette range lets you climb, sprint, or cruise without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range. - Refined 12 step gear combination provides peak efficiency and accelerating performance for every racing situation - Faster, smoother shifts under maximum pedaling force - Compatible with 12-speed and road 11-speed freehub body

Offering all the precision and functionality of the DURA-ACE power meter, the ULTEGRA FC-R8100-P power meter comes in a more affordable package. Scientific training requires accurate measurement and user-friendliness, and the new ULTEGRA R8100 power meter has both. Its dual-sided measurement is accurate within 1.5% and zero offset calibration is a quick and easy process. Perhaps most importantly, its long battery life, easy recharge, and ANT+ and Bluetooth®LE connectivity makes using and recording your workouts easier than ever. Integrated, waterproof, and rechargeable Li-ion battery - Up to 300+ hours (TBD*) of ride time * Depending on ANT+/Bluetooth®LE settings Accurate data collection - ±1.5% (TBD*) strain gage accuracy throughout the entire calibration range * Depending on ANT+/Bluetooth®LE settings - Proprietary strain gauge Possible to start quickly - Simple zero offset calibration with switch on transmitter Active temperature compensation - Software automatically compensates for temperature changes

- High-performance gear combinations provide superior rider choice - Hub body to fit a variety of bikes from MTB to road - Model Number: CS-HG800-11 - Series: Shimano - Average Weight: 335 grams

Shimano Ultegra R8000 dual-pivot brake caliper. - Clear contact feeling with balanced rigidity, weight and stopping power - Stabilizer between axles reduces deformation and improves braking efficiency - More predictable, linear braking curve - Sleek design - Narrower gap between arms - Wider clearance with larger tire sizes - Compatible with wider 28c tire size - Model Number: BR-R8000 - Series: Ultegra - Brake Type: SLR EV Dual Pivot - Average Weight: 182 grams (Front) 178 grams (Rear)

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams

Shimano Ultegra ST-R8150 levers combine the accuracy of Shimano 12-speed Di2 shifting with the light weight of rim brakes. - Quick and intuitive shifting - Clearly defined click feeling with ergonomic shifting lever - Better bike control and confidence in race conditions - Hood shape and texture optimize grip and brake power transmission

Shimano's Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. Your time on the bike is precious, let Shimano make it even better. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Unparalleled ergonomics engineering refined with feedback from professional riders - Raised hood peak improves ergonomics - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection - High electronic energy efficiency, with 1.5 to 2 years of battery life from CR1632 shifter batteries - Can be used with additional satellite shifters

Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8120 4-piston caliper is designed for tough enduro trails - Set includes brake lever, caliper, finned metal pads, and hose - Brakes are pre-bled for convenient setup

The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence. - Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - Cassette Body Type: Shimano Micro Spline - Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 - Drivetrain Speeds: 12 - Range: 10-51

The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic

Shimano's XTR M9120 Enduro-style hydraulic disc brake system increases brake rigidity for greater bike control, and optimizes braking performance. - 4-piston Enduro brake system offers high performance brake control with reduced input force at the finger tips - Banjo type connection and inboard hose routing - Lever provides greater flexibility and an action-optimized cockpit layout - Lever can be adjusted to suit any hand or riding style with tool-free reach adjust - Quicker rebound between actions maintains rider concentration - Brakes are pre-bled Specifications: Rotor Included: No Color: Gray Pad Compound: Metallic Adjustable Contact Point: Yes Brake Lever Use: Right Hydraulic Fluid Type: Mineral Oil Brake Lever Actuation: Hydraulic Adjustable Reach: Yes Rotor Size (mm): 1700 Brake Caliper Type: Post Mount

In Mountain bike riding, trail conditions change drastically from one second to the next, from one turn to the next. Mountain bikers need to be able to seamlessly perceive the conditions, judge their options, and operate their bike in a split second. XTR satisfies the needs of the most demanding riders by providing the highest level of precision and integration. Shimano refocused on the original goal of XTR - to be the ultimate race components. The M9100 brakes have been retuned for better modulation with less abrupt action by incorporating more of a linear feel as the lever is brought to maximum power. The lever clamp has been moved inboard by 25mm which allows room to insert a dropper lever or suspension control between the brake clamp and the grip. There is also now a new I-SPEC EV direct-mount interface option as well. The new I-SPEC EV interface is not backwards compatible. The new generation of XTR brakes come in two variations; XC (BR-M9100) and Enduro (BR-M9120).

Shimano XTR CS-M9100 cassette features better chain retention and ground clearance. This cassette is built with a strategic application of aluminum, titanium, and steel materials for an optimal blend of weight savings, rigidity, and durability. - Compatible with Shimano Hyperglide+ chains - Hyperglide+ technology offers better chain engagement, stronger retention, and smoother pedaling for greater power and confidence over rapidly changing terrain - Micro Spline technology delivers lightweight aluminum freehub body to reduce weight and utilize a 10 tooth top gear - The Wide Range XTR M9100 cassette option offers 510% gear range - Can only be used for 1x12 set ups with the long cage rear derailleur - The CS-M9100 cassette meets durability requirements for E-MTB applications

The Shimano XTR FC-M9125 crankset features a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. Shimano, XTR FC-M9125-1, Crankset, Speed: 11/12, Spindle: 24mm, BCD: Direct Mount, No Chainring, Hollowtech II, Grey, SuperBoost+,

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 162mm Q-Factor

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor

Shimano XTR M9100 shifters feature fast and intuitive operation. - Right shifter features quicker lever access and light operation force, and is compatible with both 11 and 12-speed drive trains - Left shift features only one shift lever (2-way release)—push lever forward to up-shift; and either push or pull the lever to down-shift

Shimano XTR M9100 shifters feature fast and intuitive operation. - Shimano I-Spec shifters mount directly to brakes so no handlebar clamp is needed - Compatible with 12-speed drive trains - Right shifter features quicker lever access and light operation force, and is compatible with 12-speed drive trains - Left shift features only one shift lever (2-way release)—push lever forward to up-shift; and either push or pull the lever to down-shift

Shimano XTR M9000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

The RD-M9100 XTR rear derailleur is intended for use with 1x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Added bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Compatible cassette size: 10-51 (12-speed), 10-45 (11-speed) - Total capacity: 35t (GS Medium Cage) / 41t (SGS Long Cage)

The pinnacle in mountain bike braking, SHIMANO XTR RT-MT900 disc brake rotors deliver superb stopping power for the most aggressive riding. The ICE TECHNOLOGIES FREEZA rotors dissipate heat to maintain braking performance on long downhill stretches. SHIMANO's CENTER LOCK mounting system makes installing and removing rotors quick and easy thanks to the spine mount and lock ring design. High-performance and consistent brake performance - Stable and versatile brake performance in the most demanding conditions New ICE TECHNOLOGIES FREEZA construction for boosting heat dissipation - Surface temperature cooled by -20°C (vs RT99, 203 mm) Rotor size - 160 mm, 180 mm, 203 mm

Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)

Ellipse Moderate features a central anatomic hole for pressure relief, and 3D Skingel to guarantee maximum comfort in the ischial and perineal areas. To guard against impacts and abrasions, the Ellipse also features Double Cover, a double-layer material applied to the sides of the saddle to double resistance against impacts and abrasions. Rear elastomers are added for better shock absorption. 3D Skingel This is an advanced, flexible system where Royalgel is placed strategically according to the anatomical needs of the rider, resulting in a lighter weight saddle while maintaining pressure reduction on the perineal and ischial areas up to 40%. Double-Cover Side Protection A double-layer material applied to the sides of the saddle to double resistance against impacts and abrasions. Water Resistant Royal Vacuum Light is a patented Selle Royal technology that allows the saddle to be 100% sealed and therefore water resistant. Saddles made with this production method are furthermore 20% lighter than ordinary ones of the same category. Integrated Clip System A patented clip system positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessory. Elastomers Absorbing even the most severe and unexpected shocks, elastomers work both vertically and horizontally for safe, silent and permanently non-deformable performance.

Float Moderate is an anatomic saddle with a central opening designed for greater relief in the pubic area. A slow-moving memory foam padding, Slow Fit Foam, provides superior comfort by adapting to the body and creating a more uniform weight distribution. Slow Fit Foam With its unique slow recovery property, this memory foam provides superior comfort by molding itself to fit the shape of the body's contact points, creating more uniform pressure distribution while maintaining effective support. Integrated Clip System A patented clip system positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessory. Elastomers Absorbing even the most severe and unexpected shocks, elastomers work both vertically and horizontally for safe, silent and permanently non-deformable performance.

The Max SLR Boost Gel Superflow saddle is ideal for gravel, road cycling, and touring. It’s specifically created for a comfortable, more upright riding position, and is built in the style of Selle Italia’s SLR saddles, the timeless “super light racing” group that is a longstanding benchmark of excellence, comfort, and lightness. It features a slightly cradled seat profile and lightweight yet strong TI 316 rails and has a wide central “Superflow” cut-out for pressure relief, plus it has increased padding, a shock-absorption system between the shell and the rail, and a vibration-absorbing layer of gel. Wrapping it all is a durable black Fibra-Tek microfiber cover that ensures great looks and a long life. SuperFlow technology drastically reduces all physical limitations caused by prolonged pressure in the perineal area A layer of gel that ensures excellent sitting comfort by offering flexibility in the central part of the saddle and absorbing road vibrations Titanium Rails provide a 25% increase for resistance and durability, and reduced weight by 15% compared to traditional rails Boost saddles feature a shorter nose compared to traditional saddles, a modification that improves pedaling ergonomics, rider maneuverability, comfort, and performance ID Match: L3 Specifications: Color: Black Width: 155mm Rail Material: Titanium Clamp Style: Std Rails Material: Synthetic Length: 248mm Saddle Cut Out: Yes Weight: 174g